Skip to content
Snippets Groups Projects

Compare revisions

Changes are shown as if the source revision was being merged into the target revision. Learn more about comparing revisions.

Source

Select target project
No results found
Select Git revision
  • master
1 result

Target

Select target project
No results found
Select Git revision
  • master
1 result
Show changes
115 files
+ 7791
− 3239
Compare changes
  • Side-by-side
  • Inline

Files

adressaufkleber/vl-addressLabels.cls

+2 −9
Original line number Diff line number Diff line
@@ -3,7 +3,7 @@ 
\listfiles

\NeedsTeXFormat{LaTeX2e}[1999/12/01]

\ProvidesClass{vl-addressLabels}

    [2018/07/13 v0.1h Dokumentenklasse (RN/PTB)]

    [2020/09/16 v0.1i Dokumentenklasse (RN/PTB)]



\newcommand*\vl@lang{english}
@@ -149,15 +149,8 @@ 


\newcommand*\vlReturn{%

  \parbox[t]{\paperwidth}{%

    \ifx\vl@handledby\@empty AG~7.54\else\vl@handledby\fi\par

    \iffalse

    \IfLanguageName{ngerman}{%

      Leiter der Arbeitsgruppe für Vakuummetrologie

    }{%

      Head of Section Vacuum Metrology

    }\par

    \fi

    Physikalisch-Technische Bundesanstalt \par

    \ifx\vl@handledby\@empty AG~7.54\else\vl@handledby\fi\par

    Abbestraße 2--12 \par

    10587 Berlin \par

    \settowidth\@tempdimd{Telefon:}%

antragsbestaetigung/HINWEIS

0 → 100644
+3 −0
Original line number Diff line number Diff line 
Die Dokumentenklasse `ptb-confirm` wird in 7.54 nicht mehr für Antragsbestätigungen genutzt, stattdessen normale PTB-Briefe (`ptbletter`).



RN, 2023-04-18

antragsbestaetigung/antragsbestaetigung-test-en.tex

+1 −2
Original line number Diff line number Diff line
@@ -22,8 +22,7 @@ 
\Town{Eastbourne, East Sussex}

\Land{United Kingdom}



\Device{CDG 1\,Torr XXX YYY ZZZ XXX YYY ZZZ XXX YYY ZZZ XXX YYY ZZZ XXX YYY ZZZ

  XXX YYY ZZZ XXX YYY ZZZ XXX YYY ZZZ }

\Device{ {CDG 1\,Torr} {XXX} {YYY} }

\Condition{Moonlight}

\ScheduleDate{2015-07-13}

\Duration{17}

antragsbestaetigung/ptb-confirm-de.lco

+0 −2
Original line number Diff line number Diff line
@@ -8,11 +8,9 @@ Aufgrund Ihres Antrags vom \usekomavar{yourmail} führt die PTB folgende 
Kalibrierung durch:

\def\do#1{%

  \edef\vl@tempa{\trim@spaces@noexp{#1}}%

  \typeout{*************** \vl@tempa}%

  \def\z{\def\z{\,\textbullet\,}}%

  \expandafter\@tfor\expandafter\vl@tempb\expandafter

    :\expandafter=\vl@tempa\do{%

    \typeout{+++++++++++++++ \vl@tempb}%

    \z\vl@tempb

  }

  \par\smallskip

antragsbestaetigung/ptb-confirm-en.lco

+3 −3
Original line number Diff line number Diff line
@@ -8,11 +8,9 @@ According to your order of \usekomavar{yourmail}, PTB will carry out the 
following calibration: 

\def\do#1{%

  \edef\vl@tempa{\trim@spaces@noexp{#1}}%

  \typeout{*************** \vl@tempa}%

  \def\z{\def\z{\,\textbullet\,}}%

  \expandafter\@tfor\expandafter\vl@tempb\expandafter

    :\expandafter=\vl@tempa\do{%

    \typeout{+++++++++++++++ \vl@tempb}%

    \z\vl@tempb

  }

  \par\smallskip
@@ -34,7 +32,9 @@ Total calibration fee: & \vl@Fee \\ 


\closing{\MFg}



\noindent per procura \par\medskip\noindent\usekomavar{handledby}

%\noindent per procura

\noindent on behalf of PTB

\par\medskip\noindent\usekomavar{handledby}



\makeatother

antragsbestaetigung/ptb-confirm.cls

+10 −10
Original line number Diff line number Diff line
@@ -63,6 +63,7 @@ 
\newcommand*\vl@Duration{?}

\newtoks\vl@devTabLines



\RequirePackage{hyperref}

\AtBeginDocument{% 

  \ifnum\number\vl@missingEntries>0 %

    \AddToShipoutPictureBG{%
@@ -78,7 +79,6 @@ 
  \def\do#1{%

    \vl@devTabLines\expandafter{\the\vl@devTabLines & #1\\}%

  } 

  \RequirePackage{hyperref}

  \begin{letter}{%

    %\vl@Company \\

    \mbox{}%

arbeitsanweisung/vl-aa-new-engines.clo

+10 −12
Original line number Diff line number Diff line 
% Rolf Niepraschk, Rolf.Niepraschk@ptb.de



\ProvidesFile{vl-aa-new-engines.clo}[2018/05/15 v0.1a AA -- new engines (RN)]

\ProvidesFile{vl-aa-new-engines.clo}[2020/06/11 v0.1b AA -- new engines (RN)]



\RequirePackage[no-math]{fontspec}

\RequirePackage{unicode-math}

\setromanfont[Ligatures=TeX]{TeX Gyre Pagella}

\setsansfont[Ligatures=TeX]{TeX Gyre Heros}

\setmainfont{Latin Modern Roman}[Ligatures=TeX]

\setsansfont{Latin Modern Sans}[Ligatures=TeX]

\setmonofont{AnonymousPro-Regular}[%

    Extension = .ttf,

    BoldFont = AnonymousPro-Bold,

    ItalicFont = AnonymousPro-Italic,

    BoldItalicFont = AnonymousPro-BoldItalic,

  Scale     = MatchLowercase

    Scale     = .88

]



\setmathfont[math-style=ISO,bold-style=ISO]{TeXGyrePagellaMath-Regular}

%%%{TeX Gyre Pagella Math}

\setmathfont{Latin Modern Math}[math-style=ISO,bold-style=ISO]

  

\endinput

arbeitsanweisung/vl-aa-old-engines.clo

+5 −4
Original line number Diff line number Diff line 
% Rolf Niepraschk, Rolf.Niepraschk@ptb.de



\ProvidesFile{vl-aa-old-engines.clo}[2018/05/15 v0.1a AA -- old engines (RN)]

\ProvidesFile{vl-aa-old-engines.clo}[2020/06/20 v0.1b AA -- old engines (RN)]

  

\RequirePackage[utf8]{inputenc}

\RequirePackage[T1]{fontenc}

\RequirePackage{textcomp}

\RequirePackage{tgpagella,qpxmath}

\RequirePackage{tgheros}

%\RequirePackage{tgpagella,qpxmath}

%\RequirePackage{tgheros}

\RequirePackage{lmodern}

\RequirePackage[ttdefault=true,scale=1.034]{AnonymousPro}



\endinput

arbeitsanweisung/vl-arbeitsanweisung.cls

+43 −4
Original line number Diff line number Diff line 


\NeedsTeXFormat{LaTeX2e}[1999/12/01]

\ProvidesClass{vl-arbeitsanweisung}

    [2018/05/15 v1.0a Dokumentenklasse (RN/PTB)]

    [2020/09/11 v1.0b Dokumentenklasse (RN/PTB)]

\DeclareOption*{\PassOptionsToClass{\CurrentOption}{scrartcl}}

\ProcessOptions\relax

\PassOptionsToPackage{headinclude,usegeometry}{typearea}
@@ -197,8 +197,9 @@ footskip=85bp, 


% Kompaktere Listen

\RequirePackage{enumitem}

\setlist{leftmargin=*}

\setlist[1]{labelindent=1em}

\setlist{noitemsep}

%\setlist{leftmargin=*}

%\setlist[1]{labelindent=1em}



\renewcommand{\floatpagefraction}{.9}

\renewcommand{\textfraction}{.1}
@@ -210,7 +211,7 @@ footskip=85bp, 
\renewcommand{\dbltopfraction}{.8}

\renewcommand{\dblfloatpagefraction}{.6}

% Einzelne Abbildungen nicht auf dem leeren Blatt zentrieren.

\@fptop=0pt %

\AtBeginDocument{\@fptop=0pt} % verzögert wegen Paket `rotating'



% TODO: nach  siunitx-PTB.sty ???

\sisetup{% Formatierung von Maßzahlen (z.B. Spaltentyp "S" in Tabellen)
@@ -264,6 +265,44 @@ footskip=85bp, 


\renewcommand*\marginfont{\normalfont\normalsize\itshape\color{red}}



\RequirePackage[final]{listings}

\RequirePackage{lstautogobble}



\newcommand*\ptb@lstfont{\small\ttfamily}



\lstset{

,language={}

,basicstyle=\ptb@lstfont

,numbers=none

,backgroundcolor={}

,tabsize=2

,basicstyle=\ptb@lstfont

%,identifierstyle=\bfseries\ptb@lstfont

,keywordstyle=\bfseries\ptb@lstfont

,stringstyle=\ptb@lstfont

,commentstyle=\itshape\ptb@lstfont

,basewidth=0.55em

,keepspaces

,numbers=none

,frame=single

,framesep=\fboxsep

,aboveskip=\medskipamount

,belowskip=1pt plus .5pt minus .5pt %

,xleftmargin=\fboxsep

,xrightmargin=\fboxsep

,columns=fullflexible

%,extendedchars=true

,showspaces=false

,showstringspaces=false

,breaklines=true

,breakindent=0.5em

,breakautoindent=true

,breakatwhitespace=false  % ???

,captionpos=t

,postbreak=\mbox{$\hookrightarrow$}

,autogobble=true

} 



\emergencystretch=3em % 



\raggedbottom

erklaerung/ptb-declaration-de.clo

+16 −21
Original line number Diff line number Diff line 


\ProvidesFile{ptb-declaration-de.clo}[2018/11/08 v0.1b (ptb-declaration, german)]

\ProvidesFile{ptb-declaration-de.clo}[2021/09/14 v0.1c (ptb-declaration, german)]



\mbox{}

\vspace{-1.5cm}
@@ -42,35 +42,30 @@ Testlecks (inklusive Vakuumbauteile) 
  entgegenstehen könnten.

\end{itemize}



Die Organisation des Rücktransportes erfolgt durch die Physikalisch"=Technische 

Bundesanstalt.

\bigskip



Wir wünschen eine Versicherung des Rücktransportes:%

\qquad Ja~\checkBox{}\qquad Nein~\checkBox{}

\fbox{%

\begin{tabular}{ll}

\textbf{Rücktransport:} \\[1ex]

Wir wünschen eine Versicherung des Rücktransportes: & 

  \qquad Ja~\checkBox{}\qquad Nein~\checkBox{} \\[1ex]

Warenwert bzw.\ gewünschte Versicherungssumme: 

\end{tabular}

}



Die Kosten für Transport, Zollabfertigung, Verpackungsmaterial und Versicherung trägt der 

Auftraggeber.

Die Kosten für Transport, Zollabfertigung, Verpackungsmaterial und Versicherung 

trägt der Auftraggeber.



\textbf{Rücksendung an:}

\textbf{Rücksendeadresse:}



\vfill  



\begin{tabularx}{\textwidth}{@{}C{.3\textwidth}C{.35\textwidth}Y@{}}

  & \hrulefill \\

  & Institution\,/\,Firma \\[2.5em]

\begin{tabularx}{\textwidth}{@{}C{.25\textwidth}C{.35\textwidth}Y@{}}

  \hrulefill & \hrulefill & \hrulefill \\

  Ort, Datum & Auftragsnummer & rechtsverbindliche Unterschrift und Stempel

  Ort, Datum & Auftragsnummer des Kunden & 

  Institution\,/\,Firma und rechtsverbindliche Unterschrift

\end{tabularx}



\vspace{0mm}



\endinput
 


\begin{tabularx}{\textwidth}{@{}C{.15\textwidth}C{.15\textwidth}YY@{}}

  \multicolumn{2}{@{}c}{\hrulefill} \\

  \multicolumn{2}{@{}c}{Institution\,/\,Firma} \\[1.6em]

  \hrulefill & \hrulefill & \hrulefill & \hrulefill \\

  Ort & Datum & Firmenstempel & rechtsverbindliche Unterschrift/en

\end{tabularx}



\vspace{3mm}

erklaerung/ptb-declaration-en.clo

+16 −8
Original line number Diff line number Diff line
@@ -42,10 +42,16 @@ 
    calibration.

  \end{itemize}



Return transport will be organized by PTB.

\bigskip



We wish an insurance of the return transport:%

\qquad yes~\checkBox{}\qquad no~\checkBox{}

\fbox{%

\begin{tabular}{@{}ll@{}}

\textbf{Return transport:} \\[1ex]

We wish an insurance of the return transport: & 

  \qquad Yes~\checkBox{}\qquad No~\checkBox{} \\[1ex]

Indication of value or desired sum insured:

\end{tabular}

}



Any costs related to transport, customs clearance, packing material and insurance must be paid by PTB’s

customer.
@@ -54,13 +60,15 @@ customer. 


\vfill  



\begin{tabularx}{\textwidth}{@{}C{.3\textwidth}C{.35\textwidth}Y@{}}

& \hrulefill \\

& institution\,/\,company \\[2.5em]

\begin{tabularx}{\textwidth}{@{}C{.25\textwidth}C{.35\textwidth}Y@{}}

  \hrulefill & \hrulefill & \hrulefill \\

place, date & purchase order number & legally binding signature and stamp

  place, date & purchase order number of the customer &

  \parbox[t]{\linewidth}{\centering institution\,/\,company and \\ 

    legally binding signature}

\end{tabularx}  



\vspace{0mm}



\endinput

erklaerung/ptb-declaration.cls

+1 −1
Original line number Diff line number Diff line
@@ -4,7 +4,7 @@ 


\NeedsTeXFormat{LaTeX2e}[1999/12/01]

\ProvidesClass{ptp-declaration}

    [2016/10/17 v0.1b PTB-Klasse (RN)]

    [2021/06/14 v0.1c PTB-Klasse (RN)]



\newcommand*\vl@lang{main=ngerman}

gefahrgutformular/gefahrgutformular-new-engines.clo

deleted100644 → 0
+0 −26
Original line number Diff line number Diff line 
\ProvidesFile{gefahrgutformular-new-engines.clo}%

  [Definitionen f. luaLaTeX/XeLaTeX]



\RequirePackage{fontspec}

%\setsansfont[Ligatures=TeX]{TeX Gyre Pagella}

\setmonofont{AnonymousPro-Regular}[%

  Extension = .ttf,

  BoldFont = AnonymousPro-Bold,

  ItalicFont = AnonymousPro-Italic,

  BoldItalicFont = AnonymousPro-BoldItalic,

  Scale     = 1.034

]

\setsansfont{texgyreheros}[

  Ligatures=TeX,

  Extension=.otf,

  UprightFont=*-regular,

  BoldFont=*-bold,

  ItalicFont=*-italic,

  BoldItalicFont=*-bolditalic.otf]



\RequirePackage{newunicodechar}

\newunicodechar{^^^^202f}{\,}% 'NARROW NO-BREAK SPACE' (\u202F, 8239)

\newunicodechar{^^^^2009}{\,\hspace{0pt}}% 'THIN SPACE'

\newunicodechar{^^^^00ad}{\-}% 'SOFT HYPHEN'



\endinput

gefahrgutformular/gefahrgutformular-old-engines.clo

deleted100644 → 0
+0 −16
Original line number Diff line number Diff line 
\ProvidesFile{gefahrgutformular-old-engines.clo}%

  [Definitionen f. pdfLaTeX]



\RequirePackage[utf8]{inputenc}

\RequirePackage[T1]{fontenc}

\RequirePackage{textcomp}

\RequirePackage{lmodern}

\RequirePackage{tgheros}

\RequirePackage[ttdefault=true,scale=1.034]{AnonymousPro}

%\RequirePackage[scaled=1.05]{zlmtt}% ist lmodern!



\DeclareUnicodeCharacter{202F}{\,}% 'NARROW NO-BREAK SPACE'

\DeclareUnicodeCharacter{2009}{\,\hspace{0pt}}% 'THIN SPACE'

\DeclareUnicodeCharacter{00AD}{\-}% 'SOFT HYPHEN'



\endinput

gefahrgutformular/gefahrgutformular.cls

+92 −33
Original line number Diff line number Diff line
@@ -2,9 +2,10 @@ 
\listfiles

\NeedsTeXFormat{LaTeX2e}[1999/12/01]

\ProvidesClass{gefahrgutformular}

    [2019/04/03 v0.1a Gefahrgutformular (RN/PTB)]

    [2020/07/09 v0.1c Gefahrgutformular (RN/PTB)]



\DeclareOption*{\PassOptionsToClass{\CurrentOption}{scrartcl}}



\ProcessOptions\relax

\PassOptionsToPackage{paper=a4,pagesize}{typearea}
@@ -15,17 +16,37 @@ 
\setlength\textwidth{490bp}

\setlength\textheight{709bp}



\RequirePackage{ifxetex,ifluatex}



\newif\ifXeOrLua \XeOrLuafalse

\ifxetex\XeOrLuatrue\else\ifluatex\XeOrLuatrue\fi\fi

\RequirePackage{iftex}



\ifXeOrLua% XeLaTeX oder luaLaTeX

  \input{gefahrgutformular-new-engines.clo}

\else

  \input{gefahrgutformular-old-engines.clo}

\ifluatex\else

  \ClassError{gefahrgutformular}{LuaTeX is required for this class. Aborting.}{%

    This class can only be used with the LuaTeX engine\MessageBreak

    (command `lualatex').}

  \expandafter\stop

\fi



\RequirePackage{fontspec}

%\setsansfont[Ligatures=TeX]{TeX Gyre Pagella}

\setmonofont{AnonymousPro-Regular}[%

  Extension = .ttf,

  BoldFont = AnonymousPro-Bold,

  ItalicFont = AnonymousPro-Italic,

  BoldItalicFont = AnonymousPro-BoldItalic,

  Scale     = 1.034

]

\setsansfont{texgyreheros}[

  Ligatures=TeX,

  Extension=.otf,

  UprightFont=*-regular,

  BoldFont=*-bold,

  ItalicFont=*-italic,

  BoldItalicFont=*-bolditalic.otf]



\RequirePackage{newunicodechar}

\newunicodechar{^^^^202f}{\,}% 'NARROW NO-BREAK SPACE' (\u202F, 8239)

\newunicodechar{^^^^2009}{\,\hspace{0pt}}% 'THIN SPACE'

\newunicodechar{^^^^00ad}{\-}% 'SOFT HYPHEN'



\renewcommand*\familydefault{\sfdefault}



\newcommand*\vl@doc@style@code{616~00~h}
@@ -33,7 +54,17 @@ 
\RequirePackage{graphicx,pict2e,picture,eso-pic}

\RequirePackage[ngerman]{babel}

\RequirePackage{siunitx-PTB}



\ifluatex\RequirePackage{luaimageembed}\fi

\iffalse % Warum geht das nicht?

\AtBeginDocument{%

  \ifx\vl@SignatureGraphic\@empty    

    \ifx\vl@SignatureGraphicBaseLXIV\@empty\else

       \usepackage{luaimageembed}%

    \fi

  \fi

}

\fi



\let\vl@tempdima=\@ovxx

\let\vl@tempdimb=\@ovyy
@@ -63,7 +94,8 @@ 
\newcommand*\vl@SignatureGraphic{}

\newcommand*\SignatureGraphic[1]{\gdef\vl@SignatureGraphic{#1}}

\newcommand*\vl@SignatureGraphicBaseLXIV{}

\newcommand*\SignatureGraphicBaseLXIV[1]{\gdef\vl@SignatureGraphicBaseLXIV{#1}}

\newcommand\SignatureGraphicBaseLXIV[1]{%

  \long\gdef\vl@SignatureGraphicBaseLXIV{#1}}

\newcommand*\vl@SenderAddress{}

\newcommand*\SenderAddress[1]{\long\gdef\vl@SenderAddress{#1}}

\newcommand*\vl@RecipientAddress{}
@@ -71,7 +103,7 @@ 
\newcommand*\vl@Comment{}

\newcommand*\Comment[1]{\gdef\vl@Comment{#1}}

\newcommand*\vl@Items{}

\newcommand*\Items[1]{\long\gdef\vl@Items{#1}}

\newcommand\Items[1]{\long\gdef\vl@Items{#1}}



\AddToShipoutPictureBG{%

  \frenchspacing
@@ -82,7 +114,7 @@ 
    \put(\vl@tempdima,68bp){\framebox(\textwidth,\textheight){}}%

    %------ alle waagerechten Linien und Texte in der Nähe ------

    \vl@tempdimb=694bp %

    \put(\vl@tempdima,\vl@tempdimb){\line(1,0){\textwidth}%

    \put(\vl@tempdima,\vl@tempdimb){

      \put(4bp,65bp){\resizebox{202bp}{!}{\textbf{\Large Beförderung von 

        Gefahrgütern}}}%

      \put(4bp,35bp){\resizebox{106bp}{!}{\Large In Braunschweig an:}}%
@@ -94,40 +126,45 @@ 
         \put(171bp,2.5\vl@tempdimc){\vl@Telephon}% 

      \put(332bp,\vl@tempdimc){Ort, Datum:}%

         \put(332bp,2.5\vl@tempdimc){\vl@Place, \vl@Date}%

      \line(1,0){\textwidth}%

    }%

    \vl@tempdimb=644bp %

    \put(\vl@tempdima,\vl@tempdimb){\line(1,0){\textwidth}%

    \put(\vl@tempdima,\vl@tempdimb){%

      \vl@tempdimc=-17bp %

      \put(4bp,\vl@tempdimc){%

         \parbox[t]{314bp}{%

         \parbox[t]{334bp}{%

            \textbf{Gefahrgut} {\scriptsize (Bei Luft-/See- oder 

            Schienentransport Sicherheitsdatenblätter zwingend mitschicken)} 

            Bei Gemischen Angabe der 2 Hauptkomponenten in~\%, bei Säuren und 

            Laugen Konzentrationsangaben in~\%

            \ifx\vl@Items\@empty\else

              \noindent\hskip-30pt %

              \begin{itemize}%

                \scriptsize

                \vl@Items

              \end{itemize}%

            \fi

         }%

      }

      }%

      \put(347bp,\vl@tempdimc){%

         \parbox[t]{137bp}{%

            \textbf{Netto-Gewicht} in kg (bei mehr als einem Gut 

            Einzelgewichte):\par\medskip\vl@Weight

         }%

      }

      }% 

      \line(1,0){\textwidth}%

    }%

    \vl@tempdimb=406bp %

    \put(\vl@tempdima,\vl@tempdimb){\line(1,0){\textwidth}%

    \put(\vl@tempdima,\vl@tempdimb){%

      \vl@tempdimc=-17bp %

      \put(4bp,\vl@tempdimc){\textbf{Ansprechpartner} (für Rückfragen)}%

        \put(4bp,2.1\vl@tempdimc){\vl@ContactPerson}%     

      \put(347bp,\vl@tempdimc){\textbf{Hausruf:}}%

        \put(347bp,2.1\vl@tempdimc){\vl@ContactPersonTelephon}% 

      \line(1,0){\textwidth}%      

    }%

    \vl@tempdimb=363bp %

    \put(\vl@tempdima,\vl@tempdimb){\line(1,0){\textwidth}%

    \put(\vl@tempdima,\vl@tempdimb){%

      \vl@tempdimc=-17bp %

      \put(4bp,\vl@tempdimc){\textbf{Bei Luft-/See- oder Schienentransport   

        24\,h Notfallrufnummer des Absenders erforderlich:}}%
@@ -135,9 +172,10 @@ 
      \put(4bp,\vl@tempdimc){%

        \textbf{Kontaktperson}\hspace{165bp}24\,h~Notfallrufnummer: 

      }%

      \line(1,0){\textwidth}%

    }%

    \vl@tempdimb=295bp %

    \put(\vl@tempdima,\vl@tempdimb){\line(1,0){\textwidth}%

    \put(\vl@tempdima,\vl@tempdimb){%

      \vl@tempdimc=-17bp %

      \put(4bp,\vl@tempdimc){%

        \parbox[t]{236bp}{%
@@ -150,20 +188,22 @@ 
          \textbf{Empfänger}~(vollständige Adresse)\par\medskip

          \vl@RecipientAddress

        }%         

      }

      }%

      \line(1,0){\textwidth}%

    }%

    \vl@tempdimb=173bp %

    \put(\vl@tempdima,\vl@tempdimb){\line(1,0){\textwidth}%

    \put(\vl@tempdima,\vl@tempdimb){%

      \vl@tempdimc=-17bp %

      \put(4bp,\vl@tempdimc){\textbf{Bemerkungen:}}%

      \put(77bp,\vl@tempdimc){%

        \parbox[t]{409bp}{%

          \vl@Comment

        }%          

        }

      }% 

      \line(1,0){\textwidth}%

    }%

    \vl@tempdimb=124bp %

    \put(\vl@tempdima,\vl@tempdimb){\line(1,0){\textwidth}%

    \put(\vl@tempdima,\vl@tempdimb){%

      \put(12bp,-34bp){\line(1,0){171}}%

      \vl@tempdimc=95bp %

      \put(\vl@tempdimc,-17bp){\makebox(0,0)[c]{%
@@ -177,24 +217,28 @@ 
        \fi

      }}%

      \put(\vl@tempdimc,-45bp){\makebox(0,0)[c]{Unterschrift}}% 

      \line(1,0){\textwidth}%

    }%

    %

    \vl@tempdima=397bp %

    \vl@tempdimc=147bp % kurze waag. Linien

    \put(\vl@tempdima,525bp){\line(1,0){\vl@tempdimc}%

    \put(\vl@tempdima,525bp){%

      \vl@tempdimb=-15bp %

      \put(4bp,\vl@tempdimb){\textbf{Verpackung:}~\vl@Package}%

      \line(1,0){\vl@tempdimc}%

    }%

    \put(\vl@tempdima,502bp){\line(1,0){\vl@tempdimc}%

    \put(\vl@tempdima,502bp){%

      \vl@tempdimb=-17bp %

      \put(4bp,\vl@tempdimb){%

        \parbox[t]{139bp}{\textbf{Art:}\par\medskip\vl@Type}%

      }%

      \line(1,0){\vl@tempdimc}%

    }%

    %------ Symbole ------

    \vl@tempdima=145mm %

    \vl@tempdimb=255mm %

    \vl@tempdimc=12.67mm % 

    % TODO: Evtl. Paket Grafiken von "ghsystem" verwenden?!  

    \put(\vl@tempdima,\vl@tempdimb){%

      \includegraphics[width=15mm]{Dangclass2_3.png}}%

    \advance\vl@tempdima-\vl@tempdimc
@@ -219,10 +263,25 @@ 
  }%  

}







\AtBeginDocument{%

  \mbox{} \newpage

}



\iftrue

\RequirePackage[neverdecrease]{paralist}

\let\itemize\compactitem

\let\enditemize\endcompactitem

\setdefaultleftmargin{0pt}{0pt}{0pt}{0pt}{0pt}{0pt}

\pltopsep=\medskipamount

\plitemsep=\smallskipamount

\else

\RequirePackage{enumitem}

\setlist{leftmargin=*,noitemsep}

\setlist[1]{labelindent=0em}

\fi



\emergencystretch=3em %

\pagestyle{empty}

gefahrgutformular/test-gefahrgutformular.tex

+4 −0
Original line number Diff line number Diff line
@@ -25,7 +25,11 @@ Pfeiffer-vacuum SAS\\ 
  \item 6 Lecks; Druck \SI{1.5}{\bar}; UN 1046; Helium \dots

  \item 2 Lecks; Druck \SI{1.5}{\bar}; UN 1046; Wasserstoff \dots 

}



%\SignatureGraphic{SIG_Ute_Becker.png}



% Die Verwendung von \SignatureGraphicBaseLXIV erfordert LuaLaTeX

% siehe: '000_MAINTAINERS', darin 'SIG_VORNAME_NACHNAME.png' 

\SignatureGraphicBaseLXIV{%

iVBORw0KGgoAAAANSUhEUgAABdoAAAGgCAYAAAC9hNWKAAAWGXpUWHRSYXcgcHJvZmlsZSB0eXBl

IGV4aWYAAHjarZpnclw5loX/YxW9BLgLsxzYiNnBLL+/g8ySSqrqiuiJYUrM5OMzwDXHAHTnf//n

images/common/PTB-logo-A.mps

0 → 100644
+262 −0
Original line number Diff line number Diff line 
%!PS-Adobe-3.0 EPSF-3.0

%%BoundingBox: 0 0 208 76 

%%HiResBoundingBox: 0 -0.0625 207.453 75.082 

%%Creator: MetaPost 2.02

%%CreationDate: 2022.10.04:1224

%%Pages: 1

%%BeginProlog

%%EndProlog

%%Page: 1 1

%%% 0 0 0 setrgbcolor

% "P"

newpath 124.313 67.043 moveto

122.848 68.8125 121.063 70.3047 118.965 71.5195 curveto

116.863 72.7305 114.805 73.5586 112.78099 74.0039 curveto

110.762 74.4492 109.008 74.7344 107.527 74.8711 curveto

106.039 75.0039 104.492 75.0742 102.871 75.0742 curveto

82.9375 75.0742 lineto

82.9375 -0.0625 lineto

92.875 -0.0625 lineto

92.875 -0.0625 92.8789 1.47656 92.8789 1.78906 curveto

92.8789 28.7227 lineto

92.8789 36.8672 lineto

92.8789 66.8672 lineto

102.063 66.8672 lineto

103.762 66.8672 105.504 66.7344 107.293 66.4648 curveto

109.082 66.1953 110.81601 65.5586 112.492 64.5586 curveto

114.168 63.5508 115.578 62.0313 116.711 59.9922 curveto

117.848 57.9492 118.414 55.4063 118.414 52.3594 curveto

118.414 50.1211 118.06601 48.0547 117.375 46.1445 curveto

117.375 46.1445 lineto

116.68399 44.2422 115.664 42.60161 114.31601 41.2344 curveto

112.965 39.8633 111.30101 38.7969 109.31601 38.02339 curveto

107.336 37.2539 104.836 36.8672 101.836 36.8672 curveto

92.8789 36.8672 lineto

92.8789 28.7227 lineto

101.371 28.7227 lineto

105.992 28.7227 109.973 29.3008 113.30101 30.457 curveto

116.633 31.6133 119.445 33.25 121.738 35.3711 curveto

124.03099 37.4883 125.793 40.0469 127.027 43.0547 curveto

128.258 46.0586 128.875 49.4336 128.875 53.168 curveto

128.875 55.9805 128.48 58.5547 127.69101 60.8867 curveto

126.902 63.2148 125.777 65.2695 124.313 67.043 curveto

 closepath fill

% "T"

newpath 168.09 75.0742 moveto

113.855 75.0742 lineto

115.738 74.5742 118.047 73.7773 119.97699 72.66411 curveto

122.18399 71.3828 124.082 69.7969 125.625 67.9414 curveto

136.938 67.9414 lineto

136.938 -0.0625 lineto

146.875 -0.0625 lineto

146.875 67.9414 lineto

168.09 67.9414 lineto

 closepath fill

% "B"

newpath 206.332 28.3477 moveto

205.594 30.41411 204.574 32.25 203.301 33.7969 curveto

202.027 35.332 200.52 36.6172 198.816 37.6172 curveto

197.121 38.6172 195.266 39.3086 193.309 39.6875 curveto

191.238 40.082 lineto

188.52 34.5195 lineto

190.664 33.8789 192.473 32.9336 193.895 31.707 curveto

195.328 30.47661 196.434 28.9297 197.184 27.1133 curveto

197.926 25.3164 198.305 23.21089 198.305 20.8633 curveto

198.305 18.668 197.914 16.6953 197.148 15.0117 curveto

197.148 15.0117 lineto

196.383 13.3164 195.305 11.8867 193.949 10.7461 curveto

192.598 9.61719 191.02 8.76172 189.258 8.1914 curveto

187.504 7.6211 185.441 7.33594 183.117 7.33594 curveto

168.055 7.33594 lineto

168.055 35.4531 lineto

180.586 35.4531 lineto

183.742 35.4531 186.41 35.1406 188.52 34.5195 curveto

191.238 40.082 lineto

193.168 40.9258 lineto

194.723 41.60161 196.113 42.4727 197.305 43.5195 curveto

198.508 44.5781 199.512 45.7813 200.289 47.0977 curveto

201.086 48.4219 201.691 49.8945 202.098 51.4844 curveto

202.508 53.0664 202.715 54.7539 202.715 56.5 curveto

202.715 59.418 202.242 62.0664 201.316 64.3672 curveto

200.398 66.6563 199.012 68.6094 197.191 70.1758 curveto

195.371 71.75 193.051 72.97661 190.293 73.8047 curveto

187.523 74.64839 183.895 75.0742 179.512 75.0742 curveto

169.613 75.0742 lineto

169.613 68.1445 lineto

178.961 68.1445 lineto

181.855 68.1445 184.23 67.8594 186.023 67.28911 curveto

187.84 66.71089 189.344 65.8633 190.484 64.7578 curveto

191.633 63.6445 192.484 62.2852 193.016 60.707 curveto

193.535 59.1445 193.793 57.3945 193.793 55.5 curveto

193.793 53.78911 193.543 52.1094 193.043 50.5156 curveto

192.539 48.875 191.723 47.4297 190.629 46.21089 curveto

189.535 44.9883 188.141 44.0039 186.484 43.28911 curveto

184.836 42.5664 182.656 42.2031 180.004 42.2031 curveto

168.055 42.2031 lineto

168.055 66.4453 lineto

159.48 66.4453 lineto

159.48 -0.0625 lineto

182.074 -0.0625 lineto

184.391 -0.0625 186.953 0.20313 189.699 0.73047 curveto

191.691 1.10156 193.344 1.8164 195.082 2.57031 curveto

195.395 2.70703 lineto

197.23 3.5 198.914 4.4961 200.395 5.67578 curveto

201.852 6.84375 203.117 8.21875 204.152 9.76172 curveto

205.191 11.3125 206.012 13.082 206.586 15.0234 curveto

207.16 16.9727 207.453 19.1328 207.453 21.4531 curveto

207.453 23.9531 207.074 26.2656 206.332 28.3477 curveto

 closepath fill

newpath 28.1406 5.61328 moveto

28.0547 6.04688 27.9805 6.47266 27.918 6.90234 curveto

15.6953 5.51563 lineto

15.8125 4.66016 15.957 3.8086 16.1445 2.91406 curveto

 closepath fill

newpath 55.22661 38.4453 moveto

56.0469 38.4453 56.89839 38.39839 57.832 38.3047 curveto

60.2656 57.707 lineto

58.4219 57.9102 56.832 58.0039 55.2695 58.0039 curveto

48.9375 58.0039 42.7578 56.7422 36.89839 54.2539 curveto

44.8125 36.3945 lineto

48.1406 37.7539 51.6445 38.4453 55.22661 38.4453 curveto

 closepath fill

newpath 0 -0.0625 moveto

16.5781 -0.0625 lineto

30.1797 4.08203 lineto

30.125 4.34375 lineto

30.0078 4.3164 lineto

14.8672 0.91406 lineto

14.6875 1.73047 lineto

14.3438 3.26172 14.0977 4.71094 13.9336 6.15625 curveto

13.8398 6.98828 lineto

13.9609 7 lineto

29.3789 8.75 lineto

29.3867 8.92578 lineto

29.2656 8.91797 lineto

15.582 8.34766 lineto

15.5117 9.76953 lineto

15.4883 10.1172 15.4609 10.4766 15.4609 10.8438 curveto

15.4609 11.2344 15.4883 11.6211 15.5156 11.9922 curveto

15.5156 11.9922 lineto

15.5898 13.4453 lineto

15.7109 13.4375 lineto

29.3945 12.8281 lineto

29.3789 12.9531 lineto

29.2617 12.9688 lineto

17.2148 14.3398 lineto

17.3086 15.1719 lineto

17.3906 15.8867 17.5156 16.60161 17.6211 17.2383 curveto

17.7617 18.0469 lineto

18.5898 17.9922 lineto

29.83589 16.0586 lineto

29.6875 15.1797 lineto

29.60161 14.668 29.5273 14.2305 29.47661 13.7852 curveto

29.3789 12.9531 lineto

29.3945 12.8281 lineto

29.3281 11.5117 lineto

29.3125 11.293 29.2969 11.0664 29.2969 10.8438 curveto

29.2969 10.6406 29.3086 10.4336 29.3242 10.2383 curveto

29.3867 8.92578 lineto

29.3789 8.75 lineto

29.4727 7.91797 lineto

29.5742 7.02734 29.72661 6.125 29.9414 5.16016 curveto

30.125 4.34375 lineto

30.1797 4.08203 lineto

30.4219 3.28125 lineto

30.75 2.21875 31.1836 1.11719 31.7344 -0.0625 curveto

33.3789 -0.0625 lineto

32.9688 0.7461 32.5781 1.57422 32.2461 2.4414 curveto

30.5586 6.83984 30.2227 11.4453 31.2539 16.125 curveto

5.15234 22.8125 lineto

5.35547 23.625 lineto

8.86328 37.33589 17.97661 49.125 30.3633 55.9727 curveto

31.0742 56.3633 lineto

31.1328 56.2617 lineto

44.1094 32.7305 lineto

47.5977 34.5078 51.3398 35.4063 55.22661 35.4063 curveto

56.6094 35.4063 58.0156 35.28911 59.4023 35.0547 curveto

65.83589 33.9727 71.4492 30.3086 75.1445 25.207 curveto

75.1445 27.4219 lineto

73.6133 29.2578 71.85161 30.8789 69.8594 32.2422 curveto

69.1719 32.7148 lineto

69.2383 32.8125 lineto

75.1445 41.4492 lineto

75.1445 44.14839 lineto

68.77339 32.9492 lineto

68.0469 33.3672 lineto

65.418 34.8594 63.2422 35.6914 60.5352 36.2305 curveto

59.7188 36.3906 lineto

59.2813 36.4453 lineto

58.4531 36.5508 lineto

57.2461 36.7031 56.2227 36.77339 55.22661 36.77339 curveto

51.5977 36.77339 48.0664 36.0195 44.7227 34.53911 curveto

43.957 34.1992 lineto

34.6914 55.1094 lineto

35.4531 55.4492 lineto

41.7539 58.2539 48.4219 59.6797 55.2695 59.6797 curveto

57.1133 59.6797 59.0273 59.5469 61.3008 59.2695 curveto

62.1328 59.16411 lineto

62.1172 59.0469 lineto

59.2813 36.4453 lineto

59.7188 36.3906 lineto

59.7422 36.5078 lineto

63.6836 57.08589 lineto

64.5078 56.9219 lineto

68.16411 56.1914 71.72661 55.0039 75.1445 53.3945 curveto

75.1445 75.082 lineto

0 75.082 lineto

 closepath fill

newpath 27.6328 10.5234 moveto

27.6289 10.6289 27.625 10.7383 27.625 10.8438 curveto

27.625 10.9766 27.6289 11.1055 27.6367 11.2344 curveto

17.1719 11.6992 lineto

17.1523 11.3906 17.1367 11.125 17.1367 10.8438 curveto

17.1367 10.5977 17.14839 10.3516 17.16411 10.0859 curveto

 closepath fill

newpath 59.1563 33.39839 moveto

57.85161 33.6211 56.5273 33.7344 55.22661 33.7344 curveto

51.625 33.7344 48.1602 32.9023 44.9219 31.2578 curveto

47.7617 26.1094 lineto

47.0547 25.6992 lineto

42.9805 23.33589 40.0273 19.5508 38.7383 15.043 curveto

38.5156 14.2617 lineto

38.4023 14.293 lineto

32.875 15.7109 lineto

31.9219 11.3555 32.2461 7.07031 33.8281 2.97266 curveto

34.2344 1.91797 34.7188 0.90625 35.2539 -0.0625 curveto

75.1445 -0.0625 lineto

75.1445 22.0977 lineto

71.8203 27.9297 65.9883 32.2305 59.1563 33.39839 curveto

 closepath fill

newpath 7.1914 24.0156 moveto

31.668 17.7422 lineto

33.4063 23.6914 37.3008 28.7188 42.6523 31.91411 curveto

30.4219 54.0898 lineto

19.10161 47.5742 10.6445 36.625 7.1914 24.0156 curveto

 closepath fill

newpath 19.082 15.8125 moveto

26.0039 15.0195 lineto

19.1445 16.1992 lineto

19.1211 16.0703 19.10161 15.9414 19.082 15.8125 curveto

 closepath fill

newpath 22.3086 -0.0625 moveto

29.9023 -0.0625 lineto

29.5898 0.64844 29.3125 1.32813 29.082 2 curveto

 closepath fill

newpath 61.6719 37.6953 moveto

63.9375 37.1758 65.9453 36.4063 68.1406 35.2227 curveto

75.1445 47.5273 lineto

75.1445 51.5117 lineto

71.8867 53.1172 68.4922 54.3398 65.0078 55.1094 curveto

 closepath fill

newpath 75.1445 29.9258 moveto

75.1445 38.4883 lineto

71.4883 33.1406 lineto

72.8086 32.1758 74.02339 31.0938 75.1445 29.9258 curveto

 closepath fill

newpath 37.3711 16.2813 moveto

38.793 20.582 41.6797 24.2813 45.5156 26.7188 curveto

43.4648 30.4453 lineto

38.5195 27.4688 34.91411 22.8164 33.28911 17.3281 curveto

 closepath fill

showpage

%%EOF

images/common/PTB-logo-A.tex

0 → 100644
+261 −0
Original line number Diff line number Diff line 
% Rolf Niepraschk, Rolf.Niepraschk@ptb.de, 2022-10-04

%

% PTB-Logo konvertiert von der offiziellen eps-Datei 

%    ("purifyeps" + Editieren --> "PTB-logo-A.mps" --> "PTB-logo-A.tex")

%

\begin{picture}(208,76)

  %%\put(0,0){\textcolor{black}{\framebox(208,76){}}}

% "P"

\moveto(124.313,67.043)

\curveto(122.848,68.8125)(121.063,70.3047)(118.965,71.5195)

\curveto(116.863,72.7305)(114.805,73.5586)(112.78099,74.0039)

\curveto(110.762,74.4492)(109.008,74.7344)(107.527,74.8711)

\curveto(106.039,75.0039)(104.492,75.0742)(102.871,75.0742)

\lineto(82.9375,75.0742)

\lineto(82.9375,-0.0625)

\lineto(92.875,-0.0625)

\curveto(92.875,-0.0625)(92.8789,1.47656)(92.8789,1.78906)

\lineto(92.8789,28.7227)

\lineto(92.8789,36.8672)

\lineto(92.8789,66.8672)

\lineto(102.063,66.8672)

\curveto(103.762,66.8672)(105.504,66.7344)(107.293,66.4648)

\curveto(109.082,66.1953)(110.81601,65.5586)(112.492,64.5586)

\curveto(114.168,63.5508)(115.578,62.0313)(116.711,59.9922)

\curveto(117.848,57.9492)(118.414,55.4063)(118.414,52.3594)

\curveto(118.414,50.1211)(118.06601,48.0547)(117.375,46.1445)

\lineto(117.375,46.1445)

\curveto(116.68399,44.2422)(115.664,42.60161)(114.31601,41.2344)

\curveto(112.965,39.8633)(111.30101,38.7969)(109.31601,38.02339)

\curveto(107.336,37.2539)(104.836,36.8672)(101.836,36.8672)

\lineto(92.8789,36.8672)

\lineto(92.8789,28.7227)

\lineto(101.371,28.7227)

\curveto(105.992,28.7227)(109.973,29.3008)(113.30101,30.457)

\curveto(116.633,31.6133)(119.445,33.25)(121.738,35.3711)

\curveto(124.03099,37.4883)(125.793,40.0469)(127.027,43.0547)

\curveto(128.258,46.0586)(128.875,49.4336)(128.875,53.168)

\curveto(128.875,55.9805)(128.48,58.5547)(127.69101,60.8867)

\curveto(126.902,63.2148)(125.777,65.2695)(124.313,67.043)

\closepath\fillpath

% "B"

\moveto(206.332,28.3477)

\curveto(205.594,30.41411)(204.574,32.25)(203.301,33.7969)

\curveto(202.027,35.332)(200.52,36.6172)(198.816,37.6172)

\curveto(197.121,38.6172)(195.266,39.3086)(193.309,39.6875)

\lineto(191.238,40.082)

\lineto(188.52,34.5195)

\curveto(190.664,33.8789)(192.473,32.9336)(193.895,31.707)

\curveto(195.328,30.47661)(196.434,28.9297)(197.184,27.1133)

\curveto(197.926,25.3164)(198.305,23.21089)(198.305,20.8633)

\curveto(198.305,18.668)(197.914,16.6953)(197.148,15.0117)

\lineto(197.148,15.0117)

\curveto(196.383,13.3164)(195.305,11.8867)(193.949,10.7461)

\curveto(192.598,9.61719)(191.02,8.76172)(189.258,8.1914)

\curveto(187.504,7.6211)(185.441,7.33594)(183.117,7.33594)

\lineto(168.055,7.33594)

\lineto(168.055,35.4531)

\lineto(180.586,35.4531)

\curveto(183.742,35.4531)(186.41,35.1406)(188.52,34.5195)

\lineto(191.238,40.082)

\lineto(193.168,40.9258)

\curveto(194.723,41.60161)(196.113,42.4727)(197.305,43.5195)

\curveto(198.508,44.5781)(199.512,45.7813)(200.289,47.0977)

\curveto(201.086,48.4219)(201.691,49.8945)(202.098,51.4844)

\curveto(202.508,53.0664)(202.715,54.7539)(202.715,56.5)

\curveto(202.715,59.418)(202.242,62.0664)(201.316,64.3672)

\curveto(200.398,66.6563)(199.012,68.6094)(197.191,70.1758)

\curveto(195.371,71.75)(193.051,72.97661)(190.293,73.8047)

\curveto(187.523,74.64839)(183.895,75.0742)(179.512,75.0742)

\lineto(169.613,75.0742)

\lineto(169.613,68.1445)

\lineto(178.961,68.1445)

\curveto(181.855,68.1445)(184.23,67.8594)(186.023,67.28911)

\curveto(187.84,66.71089)(189.344,65.8633)(190.484,64.7578)

\curveto(191.633,63.6445)(192.484,62.2852)(193.016,60.707)

\curveto(193.535,59.1445)(193.793,57.3945)(193.793,55.5)

\curveto(193.793,53.78911)(193.543,52.1094)(193.043,50.5156)

\curveto(192.539,48.875)(191.723,47.4297)(190.629,46.21089)

\curveto(189.535,44.9883)(188.141,44.0039)(186.484,43.28911)

\curveto(184.836,42.5664)(182.656,42.2031)(180.004,42.2031)

\lineto(168.055,42.2031)

\lineto(168.055,66.4453)

\lineto(159.48,66.4453)

\lineto(159.48,-0.0625)

\lineto(182.074,-0.0625)

\curveto(184.391,-0.0625)(186.953,0.20313)(189.699,0.73047)

\curveto(191.691,1.10156)(193.344,1.8164)(195.082,2.57031)

\lineto(195.395,2.70703)

\curveto(197.23,3.5)(198.914,4.4961)(200.395,5.67578)

\curveto(201.852,6.84375)(203.117,8.21875)(204.152,9.76172)

\curveto(205.191,11.3125)(206.012,13.082)(206.586,15.0234)

\curveto(207.16,16.9727)(207.453,19.1328)(207.453,21.4531)

\curveto(207.453,23.9531)(207.074,26.2656)(206.332,28.3477)

\closepath\fillpath

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\moveto(28.1406,5.61328)

\curveto(28.0547,6.04688)(27.9805,6.47266)(27.918,6.90234)

\lineto(15.6953,5.51563)

\curveto(15.8125,4.66016)(15.957,3.8086)(16.1445,2.91406)

\closepath\fillpath

\moveto(55.22661,38.4453)

\curveto(56.0469,38.4453)(56.89839,38.39839)(57.832,38.3047)

\lineto(60.2656,57.707)

\curveto(58.4219,57.9102)(56.832,58.0039)(55.2695,58.0039)

\curveto(48.9375,58.0039)(42.7578,56.7422)(36.89839,54.2539)

\lineto(44.8125,36.3945)

\curveto(48.1406,37.7539)(51.6445,38.4453)(55.22661,38.4453)

\closepath\fillpath

\moveto(0,-0.0625)

\lineto(16.5781,-0.0625)

\lineto(30.1797,4.08203)

\lineto(30.125,4.34375)

\lineto(30.0078,4.3164)

\lineto(14.8672,0.91406)

\lineto(14.6875,1.73047)

\curveto(14.3438,3.26172)(14.0977,4.71094)(13.9336,6.15625)

\lineto(13.8398,6.98828)

\lineto(13.9609,7)

\lineto(29.3789,8.75)

\lineto(29.3867,8.92578)

\lineto(29.2656,8.91797)

\lineto(15.582,8.34766)

\lineto(15.5117,9.76953)

\curveto(15.4883,10.1172)(15.4609,10.4766)(15.4609,10.8438)

\curveto(15.4609,11.2344)(15.4883,11.6211)(15.5156,11.9922)

\lineto(15.5156,11.9922)

\lineto(15.5898,13.4453)

\lineto(15.7109,13.4375)

\lineto(29.3945,12.8281)

\lineto(29.3789,12.9531)

\lineto(29.2617,12.9688)

\lineto(17.2148,14.3398)

\lineto(17.3086,15.1719)

\curveto(17.3906,15.8867)(17.5156,16.60161)(17.6211,17.2383)

\lineto(17.7617,18.0469)

\lineto(18.5898,17.9922)

\lineto(29.83589,16.0586)

\lineto(29.6875,15.1797)

\curveto(29.60161,14.668)(29.5273,14.2305)(29.47661,13.7852)

\lineto(29.3789,12.9531)

\lineto(29.3945,12.8281)

\lineto(29.3281,11.5117)

\curveto(29.3125,11.293)(29.2969,11.0664)(29.2969,10.8438)

\curveto(29.2969,10.6406)(29.3086,10.4336)(29.3242,10.2383)

\lineto(29.3867,8.92578)

\lineto(29.3789,8.75)

\lineto(29.4727,7.91797)

\curveto(29.5742,7.02734)(29.72661,6.125)(29.9414,5.16016)

\lineto(30.125,4.34375)

\lineto(30.1797,4.08203)

\lineto(30.4219,3.28125)

\curveto(30.75,2.21875)(31.1836,1.11719)(31.7344,-0.0625)

\lineto(33.3789,-0.0625)

\curveto(32.9688,0.7461)(32.5781,1.57422)(32.2461,2.4414)

\curveto(30.5586,6.83984)(30.2227,11.4453)(31.2539,16.125)

\lineto(5.15234,22.8125)

\lineto(5.35547,23.625)

\curveto(8.86328,37.33589)(17.97661,49.125)(30.3633,55.9727)

\lineto(31.0742,56.3633)

\lineto(31.1328,56.2617)

\lineto(44.1094,32.7305)

\curveto(47.5977,34.5078)(51.3398,35.4063)(55.22661,35.4063)

\curveto(56.6094,35.4063)(58.0156,35.28911)(59.4023,35.0547)

\curveto(65.83589,33.9727)(71.4492,30.3086)(75.1445,25.207)

\lineto(75.1445,27.4219)

\curveto(73.6133,29.2578)(71.85161,30.8789)(69.8594,32.2422)

\lineto(69.1719,32.7148)

\lineto(69.2383,32.8125)

\lineto(75.1445,41.4492)

\lineto(75.1445,44.14839)

\lineto(68.77339,32.9492)

\lineto(68.0469,33.3672)

\curveto(65.418,34.8594)(63.2422,35.6914)(60.5352,36.2305)

\lineto(59.7188,36.3906)

\lineto(59.2813,36.4453)

\lineto(58.4531,36.5508)

\curveto(57.2461,36.7031)(56.2227,36.77339)(55.22661,36.77339)

\curveto(51.5977,36.77339)(48.0664,36.0195)(44.7227,34.53911)

\lineto(43.957,34.1992)

\lineto(34.6914,55.1094)

\lineto(35.4531,55.4492)

\curveto(41.7539,58.2539)(48.4219,59.6797)(55.2695,59.6797)

\curveto(57.1133,59.6797)(59.0273,59.5469)(61.3008,59.2695)

\lineto(62.1328,59.16411)

\lineto(62.1172,59.0469)

\lineto(59.2813,36.4453)

\lineto(59.7188,36.3906)

\lineto(59.7422,36.5078)

\lineto(63.6836,57.08589)

\lineto(64.5078,56.9219)

\curveto(68.16411,56.1914)(71.72661,55.0039)(75.1445,53.3945)

\lineto(75.1445,75.082)

\lineto(0,75.082)

\closepath\fillpath

% "T"

\moveto(168.09,75.0742)

\lineto(113.855,75.0742)

\curveto(115.738,74.5742)(118.047,73.7773)(119.97699,72.66411)

\curveto(122.18399,71.3828)(124.082,69.7969)(125.625,67.9414)

\lineto(136.938,67.9414)

\lineto(136.938,-0.0625)

\lineto(146.875,-0.0625)

\lineto(146.875,67.9414)

\lineto(168.09,67.9414)

\closepath\fillpath

\moveto(27.6328,10.5234)

\curveto(27.6289,10.6289)(27.625,10.7383)(27.625,10.8438)

\curveto(27.625,10.9766)(27.6289,11.1055)(27.6367,11.2344)

\lineto(17.1719,11.6992)

\curveto(17.1523,11.3906)(17.1367,11.125)(17.1367,10.8438)

\curveto(17.1367,10.5977)(17.14839,10.3516)(17.16411,10.0859)

\closepath\fillpath

\moveto(59.1563,33.39839)

\curveto(57.85161,33.6211)(56.5273,33.7344)(55.22661,33.7344)

\curveto(51.625,33.7344)(48.1602,32.9023)(44.9219,31.2578)

\lineto(47.7617,26.1094)

\lineto(47.0547,25.6992)

\curveto(42.9805,23.33589)(40.0273,19.5508)(38.7383,15.043)

\lineto(38.5156,14.2617)

\lineto(38.4023,14.293)

\lineto(32.875,15.7109)

\curveto(31.9219,11.3555)(32.2461,7.07031)(33.8281,2.97266)

\curveto(34.2344,1.91797)(34.7188,0.90625)(35.2539,-0.0625)

\lineto(75.1445,-0.0625)

\lineto(75.1445,22.0977)

\curveto(71.8203,27.9297)(65.9883,32.2305)(59.1563,33.39839)

\closepath\fillpath

\moveto(7.1914,24.0156)

\lineto(31.668,17.7422)

\curveto(33.4063,23.6914)(37.3008,28.7188)(42.6523,31.91411)

\lineto(30.4219,54.0898)

\curveto(19.10161,47.5742)(10.6445,36.625)(7.1914,24.0156)

\closepath\fillpath

\moveto(19.082,15.8125)

\lineto(26.0039,15.0195)

\lineto(19.1445,16.1992)

\curveto(19.1211,16.0703)(19.10161,15.9414)(19.082,15.8125)

\closepath\fillpath

\moveto(22.3086,-0.0625)

\lineto(29.9023,-0.0625)

\curveto(29.5898,0.64844)(29.3125,1.32813)(29.082,2)

\closepath\fillpath

\moveto(61.6719,37.6953)

\curveto(63.9375,37.1758)(65.9453,36.4063)(68.1406,35.2227)

\lineto(75.1445,47.5273)

\lineto(75.1445,51.5117)

\curveto(71.8867,53.1172)(68.4922,54.3398)(65.0078,55.1094)

\closepath\fillpath

\moveto(75.1445,29.9258)

\lineto(75.1445,38.4883)

\lineto(71.4883,33.1406)

\curveto(72.8086,32.1758)(74.02339,31.0938)(75.1445,29.9258)

\closepath\fillpath

\moveto(37.3711,16.2813)

\curveto(38.793,20.582)(41.6797,24.2813)(45.5156,26.7188)

\lineto(43.4648,30.4453)

\curveto(38.5195,27.4688)(34.91411,22.8164)(33.28911,17.3281)

\closepath\fillpath

\end{picture}

%

\endinput

images/common/PTB-logo-B.mps

0 → 100644
+37 −0
Original line number Diff line number Diff line 
%!PS-Adobe-3.0 EPSF-3.0

%%BoundingBox: 0 0 1000 1000 

%%HiResBoundingBox: 0 0 1000 1000 

%%Creator: MetaPost 2.02

%%CreationDate: 2022.07.22:1431

%%Pages: 1

%%BeginProlog

%%EndProlog

%%Page: 1 1

 0 20 dtransform truncate idtransform setlinewidth pop

 [] 0 setdash 0 setlinejoin 10 setmiterlimit

newpath 10 10 moveto

10 464 lineto

464 464 lineto

464 10 lineto

0 10 lineto

 closepath stroke

newpath 536 536 moveto

536 990 lineto

990 990 lineto

990 536 lineto

526 536 lineto

 closepath stroke

newpath 536 10 moveto

536 464 lineto

990 464 lineto

990 10 lineto

526 10 lineto

 closepath stroke

newpath 536 10 moveto

536 464 lineto

990 464 lineto

990 10 lineto

526 10 lineto

 closepath fill

showpage

%%EOF

images/common/PTB-logo-B.tex

0 → 100644
+31 −0
Original line number Diff line number Diff line 
% Rolf Niepraschk, Rolf.Niepraschk@ptb.de, 2022-10-04

%

\begin{picture}(1000,1000)

\linethickness{20\unitlength}

\moveto(10,10)

\lineto(10,464)

\lineto(464,464)

\lineto(464,10)

\lineto(0,10)

\closepath\strokepath

\moveto(536,536)

\lineto(536,990)

\lineto(990,990)

\lineto(990,536)

\lineto(526,536)

\closepath\strokepath

\moveto(536,10)

\lineto(536,464)

\lineto(990,464)

\lineto(990,10)

\lineto(526,10)

\closepath\strokepath

\moveto(536,10)

\lineto(536,464)

\lineto(990,464)

\lineto(990,10)

\lineto(526,10)

\closepath\fillpath

\end{picture}

%

\endinput

images/common/PTB-logo-C.mps

0 → 100644
+185 −0
Original line number Diff line number Diff line 
%!PS-Adobe-3.0 EPSF-3.0

%%BoundingBox: 0 0 1000 1526 

%%HiResBoundingBox: 0 0 1000 1526 

%%Creator: MetaPost 2.02

%%CreationDate: 2022.07.22:1431

%%Pages: 1

%%BeginProlog

%%EndProlog

%%Page: 1 1

 0 20 dtransform truncate idtransform setlinewidth pop

 [] 0 setdash 0 setlinejoin 10 setmiterlimit

% "Quadrate"

newpath 10 10 moveto

10 464 lineto

464 464 lineto

464 10 lineto

0 10 lineto

 closepath stroke

newpath 536 1062 moveto

536 1516 lineto

990 1516 lineto

990 1062 lineto

526 1062 lineto

 closepath stroke

newpath 536 536 moveto

536 990 lineto

990 990 lineto

990 536 lineto

526 536 lineto

 closepath stroke

% "Rondell"

newpath 702.40997 35.47661 moveto

701.867 38.2148 701.39801 40.9063 701 43.6211 curveto

623.75403 34.8594 lineto

624.49597 29.4531 625.40997 24.0703 626.594 18.418 curveto

 closepath fill

newpath 873.594 242.973 moveto

878.77698 242.973 884.156 242.68 890.05902 242.086 curveto

905.43799 364.707 lineto

893.78497 365.992 883.73798 366.586 873.86298 366.586 curveto

833.844 366.586 794.789 358.60901 757.758 342.883 curveto

807.77301 230.012 lineto

828.80902 238.605 850.953 242.973 873.594 242.973 curveto

 closepath fill

newpath 524.55902 -0.39453 moveto

629.33197 -0.39453 lineto

715.297 25.7969 lineto

714.94897 27.4531 lineto

714.211 27.2813 lineto

618.52002 5.77734 lineto

617.38702 10.9375 lineto

615.211 20.6133 613.656 29.77339 612.62097 38.9063 curveto

612.02698 44.16411 lineto

612.79303 44.2383 lineto

710.23401 55.3008 lineto

710.28497 56.4102 lineto

709.52002 56.3633 lineto

623.039 52.7578 lineto

622.594 61.7422 lineto

622.445 63.9414 622.27301 66.21089 622.27301 68.5313 curveto

622.27301 71 622.445 73.4453 622.617 75.78911 curveto

622.617 75.78911 lineto

623.086 84.9727 lineto

623.85199 84.9258 lineto

710.33197 81.0742 lineto

710.23401 81.8633 lineto

709.492 81.96089 lineto

633.35901 90.6289 lineto

633.94897 95.8867 lineto

634.469 100.402 635.258 104.922 635.92603 108.945 curveto

636.81299 114.055 lineto

642.047 113.711 lineto

713.12097 101.492 lineto

712.18402 95.9375 lineto

711.64099 92.7031 711.172 89.9375 710.85199 87.1211 curveto

710.23401 81.8633 lineto

710.33197 81.0742 lineto

709.914 72.7539 lineto

709.81598 71.3711 709.71503 69.9414 709.71503 68.5313 curveto

709.71503 67.25 709.789 65.9414 709.89099 64.707 curveto

710.28497 56.4102 lineto

710.23401 55.3008 lineto

710.828 50.043 lineto

711.469 44.41411 712.43402 38.71089 713.789 32.6133 curveto

714.94897 27.4531 lineto

715.297 25.7969 lineto

716.828 20.7383 lineto

718.89801 14.0234 721.64099 7.0625 725.12097 -0.39453 curveto

735.51599 -0.39453 lineto

732.922 4.71484 730.453 9.94922 728.35498 15.4297 curveto

717.69098 43.22661 715.56598 72.33589 722.086 101.91 curveto

557.12097 144.176 lineto

558.406 149.309 lineto

580.57397 235.961 638.172 310.469 716.45697 353.746 curveto

720.94897 356.215 lineto

721.32 355.574 lineto

803.33197 206.855 lineto

825.37903 218.09 849.02698 223.77 873.594 223.77 curveto

882.33197 223.77 891.219 223.027 899.98401 221.547 curveto

940.64502 214.707 976.117 191.551 999.47302 159.309 curveto

999.47302 173.305 lineto

989.797 184.91 978.664 195.156 966.07 203.77 curveto

961.72699 206.758 lineto

962.14502 207.375 lineto

999.47302 261.957 lineto

999.47302 279.01999 lineto

959.20697 208.238 lineto

954.617 210.879 lineto

938 220.313 924.25 225.57 907.14099 228.977 curveto

901.98401 229.988 lineto

899.219 230.336 lineto

893.98401 231 lineto

886.35498 231.965 879.88702 232.406 873.594 232.406 curveto

850.656 232.406 828.34003 227.645 807.20697 218.289 curveto

802.367 216.141 lineto

743.80902 348.293 lineto

748.625 350.43799 lineto

788.445 368.164 830.586 377.176 873.86298 377.176 curveto

885.51599 377.176 897.61298 376.336 911.97998 374.582 curveto

917.23798 373.918 lineto

917.14099 373.176 lineto

899.219 230.336 lineto

901.98401 229.988 lineto

902.12903 230.73 lineto

927.039 360.781 lineto

932.25 359.746 lineto

955.35498 355.129 977.87097 347.625 999.47302 337.453 curveto

999.47302 474.51999 lineto

524.55902 474.51999 lineto

 closepath fill

newpath 699.19897 66.5078 moveto

699.17603 67.1758 699.14801 67.8672 699.14801 68.5313 curveto

699.14801 69.3711 699.17603 70.1875 699.22302 71 curveto

633.086 73.9375 lineto

632.961 71.9883 632.86298 70.3086 632.86298 68.5313 curveto

632.86298 66.97661 632.93799 65.4219 633.039 63.7422 curveto

 closepath fill

newpath 898.43 211.078 moveto

890.18402 212.484 881.81299 213.203 873.594 213.203 curveto

850.828 213.203 828.93402 207.941 808.46503 197.551 curveto

826.414 165.012 lineto

821.945 162.418 lineto

796.195 147.484 777.531 123.563 769.38702 95.0703 curveto

767.97998 90.1328 lineto

767.26202 90.332 lineto

732.328 99.293 lineto

726.305 71.7656 728.35498 44.6836 738.35498 18.78911 curveto

740.922 12.1211 743.98401 5.72656 747.36298 -0.39453 curveto

999.47302 -0.39453 lineto

999.47302 139.656 lineto

978.46503 176.516 941.60498 203.695 898.43 211.078 curveto

 closepath fill

newpath 570.008 151.777 moveto

724.703 112.129 lineto

735.68799 149.73 760.30103 181.504 794.12097 201.695 curveto

716.828 341.84799 lineto

645.281 300.668 591.83197 231.469 570.008 151.777 curveto

 closepath fill

newpath 645.15997 99.9336 moveto

688.906 94.9219 lineto

645.555 102.379 lineto

645.406 101.563 645.281 100.75 645.15997 99.9336 curveto

 closepath fill

newpath 665.55103 -0.39453 moveto

713.54303 -0.39453 lineto

711.56598 4.09766 709.81598 8.39453 708.35901 12.6406 curveto

 closepath fill

newpath 914.328 238.234 moveto

928.64502 234.949 941.336 230.086 955.20697 222.605 curveto

999.47302 300.371 lineto

999.47302 325.555 lineto

978.883 335.699 957.43 343.426 935.40997 348.293 curveto

 closepath fill

newpath 999.47302 189.133 moveto

999.47302 243.246 lineto

976.367 209.449 lineto

984.711 203.352 992.38702 196.512 999.47302 189.133 curveto

 closepath fill

newpath 760.74597 102.89801 moveto

769.72998 130.078 787.97699 153.457 812.219 168.863 curveto

799.258 192.414 lineto

768.00403 173.602 745.219 144.199 734.945 109.512 curveto

 closepath fill

showpage

%%EOF

images/common/PTB-logo-C.tex

0 → 100644
+183 −0
Original line number Diff line number Diff line 
% Rolf Niepraschk, Rolf.Niepraschk@ptb.de, 2022-10-04

%

% PTB-Logo konvertiert von der offiziellen eps-Datei 

%    ("purifyeps" + Editieren --> "PTB-logo-A.mps" --> "PTB-logo-A.tex")

%

\begin{picture}(1000,1526) 

% "Quadrate"

\linethickness{20\unitlength}

\moveto(10,10)

\lineto(10,464)

\lineto(464,464)

\lineto(464,10)

\lineto(0,10)

\closepath\strokepath

\moveto(536,1062)

\lineto(536,1516)

\lineto(990,1516)

\lineto(990,1062)

\lineto(526,1062)

\closepath\strokepath

\moveto(536,536)

\lineto(536,990)

\lineto(990,990)

\lineto(990,536)

\lineto(526,536)

\closepath\strokepath

% "Rondell"

\linethickness{0pt}

\moveto(702.40997,35.47661)

\curveto(701.867,38.2148)(701.39801,40.9063)(701,43.6211)

\lineto(623.75403,34.8594)

\curveto(624.49597,29.4531)(625.40997,24.0703)(626.594,18.418)

\closepath\fillpath

\moveto(873.594,242.973)

\curveto(878.77698,242.973)(884.156,242.68)(890.05902,242.086)

\lineto(905.43799,364.707)

\curveto(893.78497,365.992)(883.73798,366.586)(873.86298,366.586)

\curveto(833.844,366.586)(794.789,358.60901)(757.758,342.883)

\lineto(807.77301,230.012)

\curveto(828.80902,238.605)(850.953,242.973)(873.594,242.973)

\closepath\fillpath

\moveto(524.55902,-0.39453)

\lineto(629.33197,-0.39453)

\lineto(715.297,25.7969)

\lineto(714.94897,27.4531)

\lineto(714.211,27.2813)

\lineto(618.52002,5.77734)

\lineto(617.38702,10.9375)

\curveto(615.211,20.6133)(613.656,29.77339)(612.62097,38.9063)

\lineto(612.02698,44.16411)

\lineto(612.79303,44.2383)

\lineto(710.23401,55.3008)

\lineto(710.28497,56.4102)

\lineto(709.52002,56.3633)

\lineto(623.039,52.7578)

\lineto(622.594,61.7422)

\curveto(622.445,63.9414)(622.27301,66.21089)(622.27301,68.5313)

\curveto(622.27301,71)(622.445,73.4453)(622.617,75.78911)

\lineto(622.617,75.78911)

\lineto(623.086,84.9727)

\lineto(623.85199,84.9258)

\lineto(710.33197,81.0742)

\lineto(710.23401,81.8633)

\lineto(709.492,81.96089)

\lineto(633.35901,90.6289)

\lineto(633.94897,95.8867)

\curveto(634.469,100.402)(635.258,104.922)(635.92603,108.945)

\lineto(636.81299,114.055)

\lineto(642.047,113.711)

\lineto(713.12097,101.492)

\lineto(712.18402,95.9375)

\curveto(711.64099,92.7031)(711.172,89.9375)(710.85199,87.1211)

\lineto(710.23401,81.8633)

\lineto(710.33197,81.0742)

\lineto(709.914,72.7539)

\curveto(709.81598,71.3711)(709.71503,69.9414)(709.71503,68.5313)

\curveto(709.71503,67.25)(709.789,65.9414)(709.89099,64.707)

\lineto(710.28497,56.4102)

\lineto(710.23401,55.3008)

\lineto(710.828,50.043)

\curveto(711.469,44.41411)(712.43402,38.71089)(713.789,32.6133)

\lineto(714.94897,27.4531)

\lineto(715.297,25.7969)

\lineto(716.828,20.7383)

\curveto(718.89801,14.0234)(721.64099,7.0625)(725.12097,-0.39453)

\lineto(735.51599,-0.39453)

\curveto(732.922,4.71484)(730.453,9.94922)(728.35498,15.4297)

\curveto(717.69098,43.22661)(715.56598,72.33589)(722.086,101.91)

\lineto(557.12097,144.176)

\lineto(558.406,149.309)

\curveto(580.57397,235.961)(638.172,310.469)(716.45697,353.746)

\lineto(720.94897,356.215)

\lineto(721.32,355.574)

\lineto(803.33197,206.855)

\curveto(825.37903,218.09)(849.02698,223.77)(873.594,223.77)

\curveto(882.33197,223.77)(891.219,223.027)(899.98401,221.547)

\curveto(940.64502,214.707)(976.117,191.551)(999.47302,159.309)

\lineto(999.47302,173.305)

\curveto(989.797,184.91)(978.664,195.156)(966.07,203.77)

\lineto(961.72699,206.758)

\lineto(962.14502,207.375)

\lineto(999.47302,261.957)

\lineto(999.47302,279.01999)

\lineto(959.20697,208.238)

\lineto(954.617,210.879)

\curveto(938,220.313)(924.25,225.57)(907.14099,228.977)

\lineto(901.98401,229.988)

\lineto(899.219,230.336)

\lineto(893.98401,231)

\curveto(886.35498,231.965)(879.88702,232.406)(873.594,232.406)

\curveto(850.656,232.406)(828.34003,227.645)(807.20697,218.289)

\lineto(802.367,216.141)

\lineto(743.80902,348.293)

\lineto(748.625,350.43799)

\curveto(788.445,368.164)(830.586,377.176)(873.86298,377.176)

\curveto(885.51599,377.176)(897.61298,376.336)(911.97998,374.582)

\lineto(917.23798,373.918)

\lineto(917.14099,373.176)

\lineto(899.219,230.336)

\lineto(901.98401,229.988)

\lineto(902.12903,230.73)

\lineto(927.039,360.781)

\lineto(932.25,359.746)

\curveto(955.35498,355.129)(977.87097,347.625)(999.47302,337.453)

\lineto(999.47302,474.51999)

\lineto(524.55902,474.51999)

\closepath\fillpath

\moveto(699.19897,66.5078)

\curveto(699.17603,67.1758)(699.14801,67.8672)(699.14801,68.5313)

\curveto(699.14801,69.3711)(699.17603,70.1875)(699.22302,71)

\lineto(633.086,73.9375)

\curveto(632.961,71.9883)(632.86298,70.3086)(632.86298,68.5313)

\curveto(632.86298,66.97661)(632.93799,65.4219)(633.039,63.7422)

\closepath\fillpath

\moveto(898.43,211.078)

\curveto(890.18402,212.484)(881.81299,213.203)(873.594,213.203)

\curveto(850.828,213.203)(828.93402,207.941)(808.46503,197.551)

\lineto(826.414,165.012)

\lineto(821.945,162.418)

\curveto(796.195,147.484)(777.531,123.563)(769.38702,95.0703)

\lineto(767.97998,90.1328)

\lineto(767.26202,90.332)

\lineto(732.328,99.293)

\curveto(726.305,71.7656)(728.35498,44.6836)(738.35498,18.78911)

\curveto(740.922,12.1211)(743.98401,5.72656)(747.36298,-0.39453)

\lineto(999.47302,-0.39453)

\lineto(999.47302,139.656)

\curveto(978.46503,176.516)(941.60498,203.695)(898.43,211.078)

\closepath\fillpath

\moveto(570.008,151.777)

\lineto(724.703,112.129)

\curveto(735.68799,149.73)(760.30103,181.504)(794.12097,201.695)

\lineto(716.828,341.84799)

\curveto(645.281,300.668)(591.83197,231.469)(570.008,151.777)

\closepath\fillpath

\moveto(645.15997,99.9336)

\lineto(688.906,94.9219)

\lineto(645.555,102.379)

\curveto(645.406,101.563)(645.281,100.75)(645.15997,99.9336)

\closepath\fillpath

\moveto(665.55103,-0.39453)

\lineto(713.54303,-0.39453)

\curveto(711.56598,4.09766)(709.81598,8.39453)(708.35901,12.6406)

\closepath\fillpath

\moveto(914.328,238.234)

\curveto(928.64502,234.949)(941.336,230.086)(955.20697,222.605)

\lineto(999.47302,300.371)

\lineto(999.47302,325.555)

\curveto(978.883,335.699)(957.43,343.426)(935.40997,348.293)

\closepath\fillpath

\moveto(999.47302,189.133)

\lineto(999.47302,243.246)

\lineto(976.367,209.449)

\curveto(984.711,203.352)(992.38702,196.512)(999.47302,189.133)

\closepath\fillpath

\moveto(760.74597,102.89801)

\curveto(769.72998,130.078)(787.97699,153.457)(812.219,168.863)

\lineto(799.258,192.414)

\curveto(768.00403,173.602)(745.219,144.199)(734.945,109.512)

\closepath\fillpath

\end{picture}

%

\endinput

images/org/README.md

0 → 100644
+1 −0
Original line number Diff line number Diff line 
**Hinweis:** Die Dateien `Logo*.pdf` sind Hardlinks zum Repositorium »logo75«. Somit ist gewährleistet, dass sie auch im Repositorium »ptb-latex« auftauchen und bei einer zu erfolgenden TeX-Installation nicht vergessen werden.

kalibriergebuehren/calibration_fees-2021.tex

0 → 100644
+141 −0
Original line number Diff line number Diff line 


%---------------------------

\setcounter{errorcontextlines}{100}

\listfiles

\documentclass[fontsize=11pt,paper=a4,pagesize]{scrartcl}

\usepackage[top=20mm,bottom=25mm,left=15mm,right=15mm]{geometry}



\usepackage{iftex}



\iftutex% LuaTeX oder XeTeX

  \RequirePackage{unicode-math}

  \setsansfont{texgyreheros}[

    Ligatures=TeX,

    Extension=.otf,

    UprightFont=*-regular,

    BoldFont=*-bold,

    ItalicFont=*-italic,

    BoldItalicFont=*-bolditalic]

  \renewcommand*\familydefault{\sfdefault}

\else% pdfTeX oder TeX+dvips

  \usepackage[utf8]{inputenc}

  \usepackage[T1]{fontenc}

  \usepackage{textcomp}

  \usepackage{tgheros}

\fi



\usepackage[english]{babel}

\usepackage{xltabular,booktabs,ragged2e,calc,siunitx-PTB}

\usepackage{eurosym}

\let\texteuro=\officialeuro



\renewcommand\familydefault{\sfdefault}



\newdimen\numwidth

\setlength\numwidth{\widthof{9999.99}}



\newcolumntype{L}{>{\RaggedRight\arraybackslash}X}

\newcolumntype{V}{>{\hspace{\numwidth}\rlap\bgroup}c<{\egroup}}



\newcommand*\markerI{$\circ$}

\newcommand*\markerII{\textbullet}



\newcounter{cdevice}

\newcommand*\tsection[1]{%

  \noalign{\stepcounter{cdevice}}%

  \multicolumn{1}{@{}L}{\textbf{\arabic{cdevice}.~#1}}

}

\newcommand*\basic[1]{%

  \multicolumn{1}{@{\hspace{1em}\markerI~}L}{#1}

}



\setlength\parindent{0pt}



\pagestyle{empty}



\begin{document}



\begin{center} \usekomafont{disposition}\Large

Physikalisch-Technische Bundesanstalt \\[.1\baselineskip]

Vacuum Metrology \\[.5\baselineskip]

Fees for Calibrations \par

\end{center}



\setlength\extrarowheight{.5ex}



\begin{xltabular}[l]{\textwidth}{@{\hspace{1.8em}\markerII~}LV@{}}

\toprule 

\multicolumn{1}{@{}c}{\textbf{Calibration device}} & 

\multicolumn{1}{c@{}}{\textbf{Fee in €}} \\

\toprule

\endhead

\tsection{Ionization gauge} \\

\basic{baked out, two decades, basic fee} & \num{1837.00} \\

\basic{not baked out, two decades, basic fee} & \num{1586.50} \\

additional decade & \num{417.50} \\

additional decade under \SI{1e-10}{\mbar} & \num{542.75} \\

additional decade over \SI{1e-4}{\mbar} & \num{375.75} \\

additional gas, two decades & \num{1043.75} \\



\midrule



\tsection{Spinning rotor gauge} \\

\basic{Sigma (effective accommodation coefficient), basic fee} & 

  \num{1377.75} \\

each additional gas & \num{501.00} \\



\midrule



\tsection{Capacitance diaphragm gauge} \\



\basic{Full scale: \SI{0.01}{\torr}, two decades, basic fee} & \num{1544.75} \\

\basic{Full scale: \SI{0.1}{\torr}, \SI{0.25}{\torr}, two decades, basic fee} & 

  \num{1336.00} \\

Full scale: \SI{0.1}{\torr}, \SI{0.25}{\torr}, each additional gas, 

two decades & \num{668.00} \\

Full scale: \SI{0.1}{\torr}, \SI{0.25}{\torr}, additional decade &

\num{334.00} \\

\basic{Full scale: \SI{1}{\torr}, \SI{10}{\torr}, two decades, basic fee} 

& \num{1169.00} \\

Full scale: \SI{1}{\torr}, \SI{10}{\torr}, each additional gas, two 

decades & \num{501.00} \\

Full scale: \SI{1}{\torr}, \SI{10}{\torr}, additional decade &

\num{292.25} \\

Full scale: \SI{1}{\torr}, \SIrange{30}{130}{\Pa} with FRS5, additional fee & 

  \num{375.75} \\

Full scale: \SI{10}{\torr}, \SIrange{30}{1300}{\Pa} with FRS5, additional fee & 

  \num{584.50} \\  

\basic{Full scale: \SI{100}{\torr}, \SI{1000}{\torr}, three decades, basic fee} 

& \num{1419.50} \\

Full scale: \SI{100}{\torr}, \SI{1000}{\torr}, each additional gas, 

three decades & \num{793.25} \\

Full scale: \SI{100}{\torr}, \SI{1000}{\torr}, additional decade &

\num{250.50} \\

Full scale: \SI{100}{\torr}, \SIrange{30}{10000}{\Pa} with FRS5, 

  additional fee & \num{751.50} \\



\midrule



\tsection{Test leak} \\



\basic{against vacuum, basic fee} & \num{1336.00} \\

each additional temperature or additional pressure & \num{835.00} \\

gas flow under \SI{1e-9}{\mbar\litre\per\second}, additional fee &

\num{835.00} \\  

\basic{against atmosphere, basic fee} & \num{835.00} \\

\basic{against atmosphere, with pressure setting and measuring, basic fee} & 

\num{1336.00} \\ 

each additional temperature or additional pressure & \num{334.00} \\



\bottomrule

\end{xltabular}



These fees are valid from October~1, 2021. German customers pay VAT with the bill.

Customers outside Germany pay VAT reverse charge. In exceptional cases, when the 

actual working time on a unit under test exceeds \SI{25}{\percent} of the 

average working time, the actual costs have to be charged. Other additional 

costs may result from expenditures of PTB for unusual special gases, special 

services, transportation, customs, or other duties.  



\end{document}

%---------------------------

kalibriergebuehren/calibration_fees-2025.tex

0 → 100644
+141 −0
Original line number Diff line number Diff line 


%---------------------------

\setcounter{errorcontextlines}{100}

\listfiles

\documentclass[fontsize=11pt,paper=a4,pagesize]{scrartcl}

\usepackage[top=20mm,bottom=25mm,left=15mm,right=15mm]{geometry}



\usepackage{iftex}



\iftutex% LuaTeX oder XeTeX

  \RequirePackage{unicode-math}

  \setsansfont{texgyreheros}[

    Ligatures=TeX,

    Extension=.otf,

    UprightFont=*-regular,

    BoldFont=*-bold,

    ItalicFont=*-italic,

    BoldItalicFont=*-bolditalic]

  \renewcommand*\familydefault{\sfdefault}

\else% pdfTeX oder TeX+dvips

  \usepackage[utf8]{inputenc}

  \usepackage[T1]{fontenc}

  \usepackage{textcomp}

  \usepackage{tgheros}

\fi



\usepackage[english]{babel}

\usepackage{xltabular,booktabs,ragged2e,calc,siunitx-PTB}

\usepackage{eurosym}

\let\texteuro=\officialeuro



\renewcommand\familydefault{\sfdefault}



\newdimen\numwidth

\setlength\numwidth{\widthof{9999.99}}



\newcolumntype{L}{>{\RaggedRight\arraybackslash}X}

\newcolumntype{V}{>{\hspace{\numwidth}\rlap\bgroup}c<{\egroup}}



\newcommand*\markerI{$\circ$}

\newcommand*\markerII{\textbullet}



\newcounter{cdevice}

\newcommand*\tsection[1]{%

  \noalign{\stepcounter{cdevice}}%

  \multicolumn{1}{@{}L}{\textbf{\arabic{cdevice}.~#1}}

}

\newcommand*\basic[1]{%

  \multicolumn{1}{@{\hspace{1em}\markerI~}L}{#1}

}



\setlength\parindent{0pt}



\pagestyle{empty}



\begin{document}



\begin{center} \usekomafont{disposition}\Large

Physikalisch-Technische Bundesanstalt \\[.1\baselineskip]

Vacuum Metrology \\[.5\baselineskip]

Fees for Calibrations \par

\end{center}



\setlength\extrarowheight{.5ex}



\begin{xltabular}[l]{\textwidth}{@{\hspace{1.8em}\markerII~}LV@{}}

\toprule 

\multicolumn{1}{@{}c}{\textbf{Calibration device}} & 

\multicolumn{1}{c@{}}{\textbf{Fee in €}} \\

\toprule

\endhead

\tsection{Ionization gauge} \\

\basic{baked out, two decades, basic fee} & \num{1969.00} \\

\basic{not baked out, two decades, basic fee} & \num{1700.50} \\

additional decade & \num{447.50} \\

additional decade under \SI{1e-10}{\mbar} & \num{581.75} \\

additional decade over \SI{1e-4}{\mbar} & \num{402.75} \\

additional gas, two decades & \num{1118.75} \\



\midrule



\tsection{Spinning rotor gauge} \\

\basic{Sigma (effective accommodation coefficient), basic fee} & 

  \num{1476.75} \\

each additional gas & \num{537.00} \\



\midrule



\tsection{Capacitance diaphragm gauge} \\



\basic{Full scale: \SI{0.01}{\torr}, two decades, basic fee} & \num{1655.75} \\

\basic{Full scale: \SI{0.1}{\torr}, \SI{0.25}{\torr}, two decades, basic fee} & 

  \num{1432.00} \\

Full scale: \SI{0.1}{\torr}, \SI{0.25}{\torr}, each additional gas, 

two decades & \num{716.00} \\

Full scale: \SI{0.1}{\torr}, \SI{0.25}{\torr}, additional decade &

\num{358.00} \\

\basic{Full scale: \SI{1}{\torr}, \SI{10}{\torr}, two decades, basic fee} 

& \num{1253.00} \\

Full scale: \SI{1}{\torr}, \SI{10}{\torr}, each additional gas, two 

decades & \num{537.00} \\

Full scale: \SI{1}{\torr}, \SI{10}{\torr}, additional decade &

\num{313.25} \\

Full scale: \SI{1}{\torr}, \SIrange{30}{130}{\Pa} with FRS5, additional fee & 

  \num{402.75} \\

Full scale: \SI{10}{\torr}, \SIrange{30}{1300}{\Pa} with FRS5, additional fee & 

  \num{626.50} \\  

\basic{Full scale: \SI{100}{\torr}, \SI{1000}{\torr}, three decades, basic fee} 

& \num{1521.50} \\

Full scale: \SI{100}{\torr}, \SI{1000}{\torr}, each additional gas, 

three decades & \num{850.25} \\

Full scale: \SI{100}{\torr}, \SI{1000}{\torr}, additional decade &

\num{268.50} \\

Full scale: \SI{100}{\torr}, \SIrange{30}{10000}{\Pa} with FRS5, 

  additional fee & \num{805.50} \\



\midrule



\tsection{Test leak} \\



\basic{against vacuum, basic fee} & \num{1432.00} \\

each additional temperature or additional pressure & \num{895.00} \\

gas flow under \SI{1e-9}{\mbar\litre\per\second}, additional fee &

\num{895.00} \\  

\basic{against atmosphere, basic fee} & \num{895.00} \\

\basic{against atmosphere, with pressure setting and measuring, basic fee} & 

\num{1432.00} \\ 

each additional temperature or additional pressure & \num{358.00} \\



\bottomrule

\end{xltabular}



These fees are valid from June~1, 2025. German customers pay VAT with the bill.

Customers outside Germany pay VAT reverse charge. In exceptional cases, when the 

actual working time on a unit under test exceeds \SI{25}{\percent} of the 

average working time, the actual costs have to be charged. Other additional 

costs may result from expenditures of PTB for unusual special gases, special 

services, transportation, customs, or other duties.  



\end{document}

%---------------------------

kalibriergebuehren/kalibriergebuehren-2021.tex

0 → 100644
+145 −0
Original line number Diff line number Diff line 


%---------------------------

\setcounter{errorcontextlines}{100}

\listfiles

\documentclass[fontsize=11pt,paper=a4,pagesize,ngerman]{scrartcl}

\usepackage[top=20mm,bottom=25mm,left=15mm,right=15mm]{geometry}



\usepackage{iftex}



\iftutex% LuaTeX oder XeTeX

  \RequirePackage{unicode-math}

  \setsansfont{texgyreheros}[

    Ligatures=TeX,

    Extension=.otf,

    UprightFont=*-regular,

    BoldFont=*-bold,

    ItalicFont=*-italic,

    BoldItalicFont=*-bolditalic]

  \renewcommand*\familydefault{\sfdefault}

\else% pdfTeX oder TeX+dvips

  \usepackage[utf8]{inputenc}

  \usepackage[T1]{fontenc}

  \usepackage{textcomp}

  \usepackage{tgheros}

\fi



\usepackage{babel}

\usepackage{xltabular,booktabs,ragged2e,calc,siunitx-PTB}

\usepackage{eurosym}

\let\texteuro=\officialeuro



\renewcommand\familydefault{\sfdefault}



\newdimen\numwidth

\setlength\numwidth{\widthof{9999.99}}



\newcolumntype{L}{>{\RaggedRight\arraybackslash}X}

\newcolumntype{V}{>{\hspace{\numwidth}\rlap\bgroup}c<{\egroup}}



\newcommand*\markerI{$\circ$}

\newcommand*\markerII{\textbullet}



\newcounter{cdevice}

\newcommand*\tsection[1]{%

  \noalign{\stepcounter{cdevice}}%

  \multicolumn{1}{@{}L}{\textbf{\arabic{cdevice}.~#1}}

}

\newcommand*\basic[1]{%

  \multicolumn{1}{@{\hspace{1em}\markerI~}L}{#1}

}



\setlength\parindent{0pt}



\pagestyle{empty}



%\sisetup{round-mode=places,round-precision=2}



\begin{document}



\begin{center} \usekomafont{disposition}\Large

Physikalisch-Technische Bundesanstalt \\[.1\baselineskip]

Vakuummetrologie \\[.5\baselineskip]

Kalibriergebühren \par

\end{center}



\setlength\extrarowheight{.5ex}



\begin{xltabular}[l]{\textwidth}{@{\hspace{1.8em}\markerII~}LV@{}}

\toprule 

\multicolumn{1}{@{}c}{\textbf{Kalibriergegenstand}} & 

\multicolumn{1}{c@{}}{\textbf{Gebühr in €}} \\

\toprule

\endhead

\tsection{Ionisationsvakuummeter} \\

\basic{ausgeheizt, zwei Dekaden, Grundgebühr} & \num{1837.00} \\

\basic{nicht ausgeheizt, zwei Dekaden, Grundgebühr} & \num{1586.50} \\

zusätzliche Dekade & \num{417.50} \\

zusätzliche Dekade unter \SI{1e-10}{\mbar} & \num{542.75} \\

zusätzliche Dekade über \SI{1e-4}{\mbar} & \num{375.75} \\

zusätzliches Gas, zwei Dekaden & \num{1043.75} \\



\midrule



\tsection{Gasreibungsvakuummeter} \\

\basic{Sigma (effektiver Akkomodationskoeffizient), Grundgebühr} & 

\num{1377.75} \\

je zusätzliches Gas & \num{501.00} \\



\midrule



\tsection{Membranvakuummeter} \\



\basic{Vollausschlag: \SI{0.01}{\torr}, zwei Dekaden, Grundgebühr} & 

  \num{1544.75} \\

\basic{Vollausschlag: \SI{0.1}{\torr}, \SI{0.25}{\torr}, zwei Dekaden, 

  Grundgebühr} & \num{1336.00} \\

Vollausschlag: \SI{0.1}{\torr}, \SI{0.25}{\torr}, je zusätzliches Gas, 

zwei Dekaden & \num{668.00} \\

Vollausschlag: \SI{0.1}{\torr}, \SI{0.25}{\torr}, zusätzliche Dekade &

\num{334.00} \\

\basic{Vollausschlag: \SI{1}{\torr}, \SI{10}{\torr}, zwei Dekaden, Grundgebühr} 

& \num{1169.00} \\

Vollausschlag: \SI{1}{\torr}, \SI{10}{\torr}, je zusätzliches Gas, zwei 

Dekaden & \num{501.00} \\

Vollausschlag: \SI{1}{\torr}, \SI{10}{\torr}, zusätzliche Dekade &

\num{292.25} \\

Vollausschlag: \SI{1}{\torr}, \SIrange{30}{130}{\Pa} mit FRS5, Zusatzgebühr & 

  \num{375.75} \\

Vollausschlag: \SI{10}{\torr}, \SIrange{30}{1300}{\Pa} mit FRS5, Zusatzgebühr & 

  \num{584.50} \\

\basic{Vollausschlag: \SI{100}{\torr}, \SI{1000}{\torr}, drei Dekaden, 

  Grundgebühr} & \num{1419.50} \\

Vollausschlag: \SI{100}{\torr}, \SI{1000}{\torr}, je zusätzliches Gas, 

drei Dekaden & \num{793.25} \\

Vollausschlag: \SI{100}{\torr}, \SI{1000}{\torr}, zusätzliche Dekade &

\num{250.50} \\

Vollausschlag: \SI{100}{\torr}, \SIrange{30}{10000}{\Pa} mit FRS5, 

  Zusatzgebühr & \num{751.50} \\



\midrule



\tsection{Testleck} \\



\basic{gegen Vakuum, Grundgebühr} & \num{1336.00} \\

je zusätzliche Temperatur oder zusätzlicher Druck & \num{835.00} \\

Gasfluss unter \SI{1e-9}{\mbar\litre\per\second}, Zusatzgebühr &

\num{835.00} \\  

\basic{gegen Atmosphäre, Grundgebühr} & \num{835.00} \\

\basic{gegen Atmosphäre mit Druckeinstellung und Messung, Grundgebühr} &

\num{1336.00} \\ 

je zusätzliche Temperatur oder zusätzlicher Druck & \num{334.00} \\



\bottomrule

\end{xltabular}



Diese Gebühren gelten ab 1.~Oktober 2021. Deutsche Kunden zahlen zuzüglich 

Mehrwertsteuer. Kunden außerhalb Deutschlands zahlen nach dem 

Reverse"=Charge"=Verfahren. In Ausnahmefällen, wenn die aufgewendete 

Arbeitszeit \SI{25}{\percent} der durchschnittlichen übersteigt, werden die 

tatsächlichen Kosten angesetzt. Weitere Zusatzkosten können sich ergeben, wenn 

der PTB Aufwendungen für ungewöhnliche Gase, spezielle Dienstleitungen, 

Transport, Zollangelegenheiten oder Sonstiges entstehen.  



\end{document}

%---------------------------

kalibriergebuehren/kalibriergebuehren-2025.tex

0 → 100644
+145 −0
Original line number Diff line number Diff line 


%---------------------------

\setcounter{errorcontextlines}{100}

\listfiles

\documentclass[fontsize=11pt,paper=a4,pagesize,ngerman]{scrartcl}

\usepackage[top=20mm,bottom=25mm,left=15mm,right=15mm]{geometry}



\usepackage{iftex}



\iftutex% LuaTeX oder XeTeX

  \RequirePackage{unicode-math}

  \setsansfont{texgyreheros}[

    Ligatures=TeX,

    Extension=.otf,

    UprightFont=*-regular,

    BoldFont=*-bold,

    ItalicFont=*-italic,

    BoldItalicFont=*-bolditalic]

  \renewcommand*\familydefault{\sfdefault}

\else% pdfTeX oder TeX+dvips

  \usepackage[utf8]{inputenc}

  \usepackage[T1]{fontenc}

  \usepackage{textcomp}

  \usepackage{tgheros}

\fi



\usepackage{babel}

\usepackage{xltabular,booktabs,ragged2e,calc,siunitx-PTB}

\usepackage{eurosym}

\let\texteuro=\officialeuro



\renewcommand\familydefault{\sfdefault}



\newdimen\numwidth

\setlength\numwidth{\widthof{9999.99}}



\newcolumntype{L}{>{\RaggedRight\arraybackslash}X}

\newcolumntype{V}{>{\hspace{\numwidth}\rlap\bgroup}c<{\egroup}}



\newcommand*\markerI{$\circ$}

\newcommand*\markerII{\textbullet}



\newcounter{cdevice}

\newcommand*\tsection[1]{%

  \noalign{\stepcounter{cdevice}}%

  \multicolumn{1}{@{}L}{\textbf{\arabic{cdevice}.~#1}}

}

\newcommand*\basic[1]{%

  \multicolumn{1}{@{\hspace{1em}\markerI~}L}{#1}

}



\setlength\parindent{0pt}



\pagestyle{empty}



%\sisetup{round-mode=places,round-precision=2}



\begin{document}



\begin{center} \usekomafont{disposition}\Large

Physikalisch-Technische Bundesanstalt \\[.1\baselineskip]

Vakuummetrologie \\[.5\baselineskip]

Kalibriergebühren \par

\end{center}



\setlength\extrarowheight{.5ex}



\begin{xltabular}[l]{\textwidth}{@{\hspace{1.8em}\markerII~}LV@{}}

\toprule 

\multicolumn{1}{@{}c}{\textbf{Kalibriergegenstand}} & 

\multicolumn{1}{c@{}}{\textbf{Gebühr in €}} \\

\toprule

\endhead

\tsection{Ionisationsvakuummeter} \\

\basic{ausgeheizt, zwei Dekaden, Grundgebühr} & \num{1969.00} \\

\basic{nicht ausgeheizt, zwei Dekaden, Grundgebühr} & \num{1700.50} \\

zusätzliche Dekade & \num{447.50} \\

zusätzliche Dekade unter \SI{1e-10}{\mbar} & \num{581.75} \\

zusätzliche Dekade über \SI{1e-4}{\mbar} & \num{402.75} \\

zusätzliches Gas, zwei Dekaden & \num{1118.75} \\



\midrule



\tsection{Gasreibungsvakuummeter} \\

\basic{Sigma (effektiver Akkomodationskoeffizient), Grundgebühr} & 

\num{1476.75} \\

je zusätzliches Gas & \num{537.00} \\



\midrule



\tsection{Membranvakuummeter} \\



\basic{Vollausschlag: \SI{0.01}{\torr}, zwei Dekaden, Grundgebühr} & 

  \num{1655.75} \\

\basic{Vollausschlag: \SI{0.1}{\torr}, \SI{0.25}{\torr}, zwei Dekaden, 

  Grundgebühr} & \num{1432.00} \\

Vollausschlag: \SI{0.1}{\torr}, \SI{0.25}{\torr}, je zusätzliches Gas, 

zwei Dekaden & \num{716.00} \\

Vollausschlag: \SI{0.1}{\torr}, \SI{0.25}{\torr}, zusätzliche Dekade &

\num{358.00} \\

\basic{Vollausschlag: \SI{1}{\torr}, \SI{10}{\torr}, zwei Dekaden, Grundgebühr} 

& \num{1253.00} \\

Vollausschlag: \SI{1}{\torr}, \SI{10}{\torr}, je zusätzliches Gas, zwei 

Dekaden & \num{537.00} \\

Vollausschlag: \SI{1}{\torr}, \SI{10}{\torr}, zusätzliche Dekade &

\num{313.25} \\

Vollausschlag: \SI{1}{\torr}, \SIrange{30}{130}{\Pa} mit FRS5, Zusatzgebühr & 

  \num{402.75} \\

Vollausschlag: \SI{10}{\torr}, \SIrange{30}{1300}{\Pa} mit FRS5, Zusatzgebühr & 

  \num{626.50} \\

\basic{Vollausschlag: \SI{100}{\torr}, \SI{1000}{\torr}, drei Dekaden, 

  Grundgebühr} & \num{1521.50} \\

Vollausschlag: \SI{100}{\torr}, \SI{1000}{\torr}, je zusätzliches Gas, 

drei Dekaden & \num{850.25} \\

Vollausschlag: \SI{100}{\torr}, \SI{1000}{\torr}, zusätzliche Dekade &

\num{268.50} \\

Vollausschlag: \SI{100}{\torr}, \SIrange{30}{10000}{\Pa} mit FRS5, 

  Zusatzgebühr & \num{805.50} \\



\midrule



\tsection{Testleck} \\



\basic{gegen Vakuum, Grundgebühr} & \num{1432.00} \\

je zusätzliche Temperatur oder zusätzlicher Druck & \num{895.00} \\

Gasfluss unter \SI{1e-9}{\mbar\litre\per\second}, Zusatzgebühr &

\num{895.00} \\  

\basic{gegen Atmosphäre, Grundgebühr} & \num{895.00} \\

\basic{gegen Atmosphäre mit Druckeinstellung und Messung, Grundgebühr} &

\num{1432.00} \\ 

je zusätzliche Temperatur oder zusätzlicher Druck & \num{358.00} \\



\bottomrule

\end{xltabular}



Diese Gebühren gelten ab 1.~Juni 2025. Deutsche Kunden zahlen zuzüglich 

Mehrwertsteuer. Kunden außerhalb Deutschlands zahlen nach dem 

Reverse"=Charge"=Verfahren. In Ausnahmefällen, wenn die aufgewendete 

Arbeitszeit \SI{25}{\percent} der durchschnittlichen übersteigt, werden die 

tatsächlichen Kosten angesetzt. Weitere Zusatzkosten können sich ergeben, wenn 

der PTB Aufwendungen für ungewöhnliche Gase, spezielle Dienstleitungen, 

Transport, Zollangelegenheiten oder Sonstiges entstehen.  



\end{document}

%---------------------------

kalibrierschein/IK-0000.clo

deleted100644 → 0
+0 −232
Original line number Diff line number Diff line 


\ProvidesFile{IK-0000.clo}[2015/12/10 v1.0c class option (RN/PTB)]



\iffalse



Definitionen, die bis Dezember 2014 gültig waren.



\fi



\RequirePackage[%

headheight=46bp,

marginparwidth=0pt,

left=69bp,

right=40bp,

textheight=646bp,

top=127bp,

headsep=40bp,

footskip=0bp,

]{geometry}



\newcommand*\ks@printFirstPage{%

  \unitlength=1bp %

  \AtPageLowerLeft{%

    %------------- Kopf ------------

    \put(69,783){\parbox{\textwidth}{\huge\bfseries\ks@PTB}}

    \put(69,760){\parbox{\textwidth}{\large\bfseries\ks@BSuB}}

    %%%\put(287,700){\includegraphics[width=62bp]{Adler.pdf}}

    \put(252,690){\normalfont\huge Kalibrierschein}

    \put(260,672){\normalfont\itshape\large Calibration Certificate}

    %-----------Mittelteil ---------

    \ks@put@main

    %------------- Fuss ------------

    %%%\put(-18bp,38bp){\rotatebox{90}{\xscriptsize 391~00B~k}}

    \put(62,83){\linethickness{1.3bp}\line(1,0){506}}

    \normalfont\scriptsize

    \put(68,68){\parbox[t]{\textwidth}{%

       Kalibrierscheine ohne Unterschrift haben keine G\"ultigkeit.

       Dieser Kalibrierschein darf nur unver\"andert weiterverbreitet\\

       werden. Ausz\"uge bed\"urfen der Genehmigung der

       Physikalisch-Technischen Bundesanstalt. \\

       \normalfont\itshape

       Calibration certificates without signature are not valid.

       This calibration certificate may not be reproduced other than in

       full. \\ Extracts may be taken only with permission of the

       Physikalisch-Technische Bundesanstalt.

    }}

  }

}



\newcommand\ks@put@main{%

  \normalfont\normalsize

  \@tempdima=68bp %

  \@tempdimb=670bp %

  \@tempdimd=207bp %

  %--------------------------------

  \advance\@tempdimb-60bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Gegenstand:}

  \put(\@tempdimd,\@tempdimb){\ks@object}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Object:}

  %--------------------------------

  \advance\@tempdimb-60bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Hersteller:}

  \put(\@tempdimd,\@tempdimb){\ks@printDevicesTable{348bp}{46bp}{29bp}}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Manufacturer:}

  %--------------------------------

  \advance\@tempdimb-60bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Typ:}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Type:}

  %--------------------------------

  \@tempdimb=478bp %

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Kennnummer:}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Serial number:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Auftraggeber:}

  \put(\@tempdimd,\@tempdimb){\ks@applicant@table}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Applicant:}

  \@tempdimb=377bp %

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Anzahl der Seiten:}

  \put(\@tempdimd,\@tempdimb){\ztotpages}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Number of pages:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Gesch\"aftszeichen:}

  \put(\@tempdimd,\@tempdimb){\ks@refNo}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Reference No.:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Pr\"ufmittelnummer:}

  \put(\@tempdimd,\@tempdimb){\ks@referenceMark}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Reference No.:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Kalibrierzeichen:}

  \put(\@tempdimd,\@tempdimb){\ks@calibMark}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Calibration mark:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Datum der Kalibrierung:}

  \put(\@tempdimd,\@tempdimb){\ks@calibDate}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Date of calibration:}%

  %--------------------------------

  \@tempdime=\@tempdimd \advance\@tempdime185bp %

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdimd,\@tempdimb){\ks@location, \ks@certificateDate}

  \put(\@tempdime,\@tempdimb){Bearbeiter:}

  \put(\@tempdime,\@tempdimc){\scriptsize\itshape Examiner:}

  \advance\@tempdimb-24bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  %--------------------------------

  \advance\@tempdimb-41bp %

  \put(\@tempdime,\@tempdimb){\ks@examiner}%

  %--------------------------------

  %%\put(52bp,170bp){\rotatebox[origin=c]{90}{\tiny 391~00B~k}}%

}



\newcommand*\ks@head{%

  \begin{picture}(0,0)

    \unitlength=1bp %

    \put(-1,28){\parbox{\textwidth}{\normalfont\huge\bfseries\ks@PTB}}

    \put(-1,2){\parbox{\textwidth}{%

      \normalfont\small

      Seite~\thepage\ zum Kalibrierschein vom~\ks@certificateDate,

      Kalibrierzeichen:~\ks@calibMark \\

      \scriptsize\itshape

      Page~\thepage\ of calibration certificate of~\ks@certificateDate,

      calibration mark:~\ks@calibMark

    }}

  \end{picture}

}



\newcommand\ks@lastPage{%

  \large

  \textbf{\Large Die Physikalisch-Technische Bundesanstalt} (PTB) in

  Braunschweig und Berlin ist das nationale Metrologieinstitut und die

  technische Oberbeh\"orde der Bundesrepublik Deutschland f\"ur das

  Messwesen und Teile der Sicherheitstechnik. Die PTB geh\"ort zum

  Dienstbereich des Bundesministeriums f\"ur Wirtschaft und Energie.

  Sie erf\"ullt die Anforderungen an Kalibrier- und Pr\"uflaboratorien

  auf der Grundlage der DIN EN ISO/IEC 17025.



  Zentrale Aufgabe der PTB ist es, die gesetzlichen Einheiten in

  \"Ubereinstimmung mit dem Internationalen Einheitensystem (SI)

  darzustellen, zu bewahren und -- insbesondere im Rahmen des

  gesetzlichen und industriellen Messwesens -- weiterzugeben. Die PTB

  steht damit an oberster Stelle der metrologischen Hierarchie in

  Deutschland. Kalibrierscheine der PTB dokumentieren die

  R\"uckf\"uhrung des Kalibriergegenstandes auf nationale Normale.



  Dieser Ergebnisbericht ist in \"Ubereinstimmung mit den Kalibrier- und

  Messm\"oglichkeiten (CMCs), wie sie im Anhang C des gegenseitigen

  Abkommens (MRA) des Internationalen Komitees f\"ur Ma\ss e und

  Gewichte enthalten sind. Im Rahmen des MRA wird die G\"ultigkeit der

  Ergebnisberichte von allen teilnehmenden Instituten f\"ur die im

  Anhang C spezifizierten Messgr\"o\ss en, Messbereiche und

  Messunsicherheiten gegenseitig anerkannt (n\"ahere Informationen unter

  http://www.bipm.org).



  \begingroup

    \vspace{1.6\baselineskip}

    \centering

    \includegraphics[width=68bp]{CIPM-MRA.png}\par

    \vspace{1.6\baselineskip}

  \endgroup



  \itshape



  \textbf{\Large The Physikalisch-Technische Bundesanstalt} (PTB) in

  Braunschweig and Berlin is the National Metrology Institute and the

  highest technical authority of the Federal Republic of Germany for the

  field of metrology and certain sectors of safety engineering. The PTB

  comes under the auspices of the Federal Ministry of Economics and Energy.

  It meets the requirements for calibration and testing

  laboratories as defined in the EN ISO/IEC 17025.



  It is fundamental task of the PTB to realize and maintain the legal

  units in compliance with the International System of Units (SI) and to

  disseminate them, above all within the framework of legal and

  industrial metrology. The PTB thus is on top of the metrological

  hierarchy in Germany. Calibration certificates issued by it document

  that the object calibrated is traceable to national standards.



  This certificate is consistent with Calibration and Measurement

  Capabilities (CMCs) that are included in Appendix C of the Mutual

  Recognition Arrangement (MRA) drawn up by the International Committee

  for Weights and Measures (CIPM). Under the MRA, all participating

  institutes recognize the validity of each other's calibration and

  measurement certificates for the quantities, ranges and measurements

  uncertainties specified in Appendix C (for details see

  http://www.bipm.org).



  \vfill \mbox{}

}



\newcommand*\ks@@foot{%

  \begin{picture}(0,0)

    \unitlength=1bp %

    \put(-7,23){\linethickness{1.3bp}\line(1,0){506}}

    \normalfont\small

    \put(-1,9){Physikalisch-Technische Bundesanstalt}

    \scriptsize

    \put(-1,-3){\parbox[t]{.25\textwidth}{%

       Bundesallee 100 \\

       38116 Braunschweig \\

       DEUTSCHLAND

    }}

    \put(280,-3){\parbox[t]{.25\textwidth}{%

       Abbestra\ss e 2--12 \\

       10587 Berlin \\

       DEUTSCHLAND

    }}

  \end{picture}

}



\endinput

%%

%% End of file `IK-0000.clo'.

kalibrierschein/IK-2015.clo

deleted100644 → 0
+0 −241
Original line number Diff line number Diff line 


\ProvidesFile{IK-2015.clo}[2015/12/10 v1.0c class option (RN/PTB)]



\iffalse



Definitionen, die ab Januar 2015 gültig sind.



\fi



\RequirePackage[%

headheight=44bp,

marginparwidth=0pt,

left=69bp,

right=40bp,

textheight=609bp,

top=164bp,

headsep=77bp,

footskip=0bp,

]{geometry}



\newcommand*\ks@printFirstPage{%

  \unitlength=1bp %

  \AtPageLowerLeft{%

    %------------- Kopf ------------

    %%%\put(69,783){\parbox{\textwidth}{\huge\bfseries\ks@PTB}}

    %%%\put(69,760){\parbox{\textwidth}{\large\bfseries\ks@BSuB}}

    \put(68,754){\includegraphics[width=308bp]{PTB-logo-2015.pdf}}

    %%%\put(287,680){\includegraphics[width=62bp]{Adler.pdf}}

    \put(252,640){\normalfont\huge Kalibrierschein}

    \put(260,622){\normalfont\itshape\large Calibration Certificate}

    %-----------Mittelteil ---------

    \ks@put@main

    %------------- Fuss ------------

    %%%\put(-18bp,38bp){\rotatebox{90}{\xscriptsize 391~00B~k}}

    %%%\put(62,83){\linethickness{1.3bp}\line(1,0){506}}

    \normalfont\scriptsize

    \put(68,68){\parbox[t]{\textwidth}{%

       Kalibrierscheine ohne Unterschrift und Siegel haben keine G\"ultigkeit.

       Dieser Kalibrierschein darf nur unver\"andert weiterverbreitet\\

       werden. Ausz\"uge bed\"urfen der Genehmigung der

       Physikalisch-Technischen Bundesanstalt. \\

       \normalfont\itshape

       Calibration certificates without signature and seal are not valid.

       This calibration certificate may not be reproduced other than in

       full. \\ Extracts may be taken only with permission of the

       Physikalisch-Technische Bundesanstalt.

    }}

  }

}



\newcommand\ks@put@main{%

  \normalfont\normalsize

  \@tempdima=68bp %

  \@tempdimb=648bp %

  \@tempdimd=207bp %

  %--------------------------------

  \advance\@tempdimb-60bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Gegenstand:}

  \put(\@tempdimd,\@tempdimb){\ks@object}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Object:}

  %--------------------------------

  \advance\@tempdimb-60bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Hersteller:}

  \put(\@tempdimd,\@tempdimb){\ks@printDevicesTable{348bp}{46bp}{29bp}}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Manufacturer:}

  %--------------------------------

  \advance\@tempdimb-60bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Typ:}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Type:}

  %--------------------------------

  %%%\@tempdimb=478bp %

  \@tempdimb=455bp %

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Kennnummer:}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Serial No.:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Auftraggeber:}

  \put(\@tempdimd,\@tempdimb){\ks@applicant@table}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Applicant:}

  \@tempdimb=377bp %

  %--------------------------------

  \advance\@tempdimb-53bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Anzahl der Seiten:}

  \put(\@tempdimd,\@tempdimb){\ztotpages}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Number of pages:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Gesch\"aftszeichen:}

  \put(\@tempdimd,\@tempdimb){\ks@refNo}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Reference No.:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Kalibrierzeichen:}

  \put(\@tempdimd,\@tempdimb){\ks@calibMark}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Calibration mark:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Datum der Kalibrierung:}

  \put(\@tempdimd,\@tempdimb){\ks@calibDate}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Date of calibration:}

  %--------------------------------

  \@tempdime=\@tempdimd \advance\@tempdime185bp %

  \advance\@tempdimb-30bp %

  %%%\@tempdimb=204bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Im Auftrag}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape On behalf of PTB}

  \put(\@tempdimd,\@tempdimb){\ks@location, \ks@certificateDate}

  \put(\@tempdime,\@tempdimb){Im Auftrag}

  \put(\@tempdime,\@tempdimc){\scriptsize\itshape On behalf of PTB}

  \advance\@tempdimb-24bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdimd,\@tempdimb){Siegel}

  \put(\@tempdimd,\@tempdimc){\scriptsize\itshape Seal}

  %--------------------------------

  \advance\@tempdimb-40bp %

  \put(\@tempdima,\@tempdimb){\ks@byOrder}

  \put(\@tempdime,\@tempdimb){\ks@examiner}

  %--------------------------------

  \put(46bp,178bp){\rotatebox[origin=c]{90}{\tiny 391~00B~n}}

}



\newcommand*\ks@head{%

  \begin{picture}(0,0)

    \unitlength=1bp %

    %%%\put(-1,28){\parbox{\textwidth}{\normalfont\huge\bfseries\ks@PTB}}

    \put(-1,-5){\includegraphics[width=308bp]{PTB-logo-2015.pdf}}

    \put(-1,-35){\parbox{\textwidth}{%

      \normalfont\small

      Seite~\thepage\ zum Kalibrierschein vom~\ks@certificateDate,

      Kalibrierzeichen:~\ks@calibMark \\

      \scriptsize\itshape

      Page~\thepage\ of the Calibration Certificate dated~\ks@certificateDate,

      calibration mark:~\ks@calibMark

    }}

  \end{picture}

}





\newcommand\ks@lastPage{%

  \large



  \begin{otherlanguage}{ngerman}



  \textbf{\Large Die Physikalisch-Technische Bundesanstalt} (PTB) in

  Braunschweig und Berlin ist das nationale Metrologieinstitut und die

  technische Oberbeh\"orde der Bundesrepublik Deutschland f\"ur das

  Messwesen. Die PTB geh\"ort zum Gesch\"aftsbereich des Bundesministeriums

  f\"ur Wirtschaft und Energie. Sie erf\"ullt die Anforderungen an Kalibrier-

  und Pr\"uflaboratorien auf der Grundlage der DIN EN ISO/IEC 17025.



  Zentrale Aufgabe der PTB ist es, die gesetzlichen Einheiten in

  \"Ubereinstimmung mit dem Internationalen Einheitensystem (SI) darzustellen,

  zu bewahren und weiterzugeben. Die PTB steht damit an oberster Stelle der

  metrologischen Hierarchie in Deutschland. Die Kalibrierscheine der PTB

  dokumentieren eine auf nationale Normale r\"uckgef\"uhrte Kalibrierung.



  Dieser Ergebnisbericht ist in \"Ubereinstimmung mit den Kalibrier- und

  Messm\"oglichkeiten (CMCs), wie sie im Anhang~C des gegenseitigen

  Abkommens (MRA) des Internationalen Komitees f\"ur Ma\ss e und

  Gewichte enthalten sind. Im Rahmen des MRA wird die G\"ultigkeit der

  Ergebnisberichte von allen teilnehmenden Instituten f\"ur die im

  Anhang~C spezifizierten Messgr\"o\ss en, Messbereiche und

  Messunsicherheiten gegenseitig anerkannt (n\"ahere Informationen unter

  http://www.bipm.org).



  \end{otherlanguage}



  \begingroup

    \vspace{1.6\baselineskip}

    \centering

    \includegraphics[width=68bp]{CIPM-MRA.png}\par

    \vspace{1.6\baselineskip}

  \endgroup



  \itshape



  \begin{otherlanguage}{english}



  \textbf{\Large The Physikalisch-Technische Bundesanstalt} (PTB) in

  Braunschweig and Berlin is the National Metrology Institute and the

  supreme technical authority of the Federal Republic of Germany for metrology.

  The PTB comes under the auspices of the Federal Ministry of Economics and

  Energy. It meets the requirements for calibration and testing laboratories as

  defined in DIN EN ISO/IEC 17025.



  The central task of PTB is to realize, to maintain and to disseminate the

  legal units in compliance with the International System of Units (SI). PTB

  thus is at the top of the metrological hierarchy in Germany. The calibration

  certificates issued by PTB document a calibration traceable to national

  measurement standards.



  This certificate is consistent with the Calibration and Measurement

  Capabilities (CMCs) that are included in Appendix~C of the Mutual

  Recognition Arrangement (MRA) drawn up by the International Committee for

  Weights and Measures (CIPM). Under the MRA, all participating institutes

  recognize the validity of each other’s calibration and measurement

  certificates for the quantities, ranges and measurement uncertainties

  specified in Appendix~C (for details, see http://www.bipm.org).



  \end{otherlanguage}



  \vfill \mbox{}

}



\newcommand*\ks@@foot{%

  \begin{picture}(0,0)

    \unitlength=1bp %

    %%%\put(-7,23){\linethickness{1.3bp}\line(1,0){506}}

    \normalfont\small

    \put(-1,9){Physikalisch-Technische Bundesanstalt}

    \scriptsize

    \put(-1,-3){\parbox[t]{.25\textwidth}{%

       Bundesallee 100 \\

       38116 Braunschweig \\

       DEUTSCHLAND

    }}

    \put(280,-3){\parbox[t]{.25\textwidth}{%

       Abbestra\ss e 2--12 \\

       10587 Berlin \\

       DEUTSCHLAND

    }}

  \end{picture}

}



%%%\renewcommand\ks@lastPage{}



\endinput

%%

%% End of file `IK-2015.clo'.

kalibrierschein/IK-2019.clo

deleted100644 → 0
+0 −13
Original line number Diff line number Diff line 


\ProvidesFile{IK-2019.clo}[2019/03/07 v1.0d class option (RN/PTB)]



% Interne Kalibrierung



\newcommand*\ks@nationalEmblem{\includegraphics[width=62bp]{Adler.pdf}}



\newcommand*\ks@first@signature{}

\newcommand*\ks@first@signature@content{}



\endinput

%%

%% End of file `IK-2019.clo'.

kalibrierschein/KK-0000.clo

deleted100644 → 0
+0 −231
Original line number Diff line number Diff line 


\ProvidesFile{KK-0000.clo}[2015/12/10 v1.0c class option (RN/PTB)]



\iffalse



Definitionen, die bis Dezember 2014 gültig waren.



\fi



\RequirePackage[%

headheight=46bp,

marginparwidth=0pt,

left=69bp,

right=40bp,

textheight=646bp,

top=127bp,

headsep=40bp,

footskip=0bp,

]{geometry}



\newcommand*\ks@printFirstPage{%

  \unitlength=1bp %

  \AtPageLowerLeft{%

    %------------- Kopf ------------

    \put(69,783){\parbox{\textwidth}{\huge\bfseries\ks@PTB}}

    \put(69,760){\parbox{\textwidth}{\large\bfseries\ks@BSuB}}

    \put(287,700){\includegraphics[width=62bp]{Adler.pdf}}

    \put(252,660){\normalfont\huge Kalibrierschein}

    \put(260,642){\normalfont\itshape\large Calibration Certificate}

    %-----------Mittelteil ---------

    \ks@put@main

    %------------- Fuss ------------

    %%%\put(-18bp,38bp){\rotatebox{90}{\xscriptsize 391~00B~k}}

    \put(62,83){\linethickness{1.3bp}\line(1,0){506}}

    \normalfont\scriptsize

    \put(68,68){\parbox[t]{\textwidth}{%

       Kalibrierscheine ohne Unterschrift und Siegel haben keine G\"ultigkeit.

       Dieser Kalibrierschein darf nur unver\"andert weiterverbreitet\\

       werden. Ausz\"uge bed\"urfen der Genehmigung der

       Physikalisch-Technischen Bundesanstalt. \\

       \normalfont\itshape

       Calibration certificates without signature and seal are not valid.

       This calibration certificate may not be reproduced other than in

       full. \\ Extracts may be taken only with permission of the

       Physikalisch-Technische Bundesanstalt.

    }}

  }

}



\newcommand\ks@put@main{%

  \normalfont\normalsize

  \@tempdima=68bp %

  \@tempdimb=670bp %

  \@tempdimd=207bp %

  %--------------------------------

  \advance\@tempdimb-60bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Gegenstand:}

  \put(\@tempdimd,\@tempdimb){\ks@object}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Object:}

  %--------------------------------

  \advance\@tempdimb-60bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Hersteller:}

  \put(\@tempdimd,\@tempdimb){\ks@printDevicesTable{348bp}{46bp}{29bp}}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Manufacturer:}

  %--------------------------------

  \advance\@tempdimb-60bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Typ:}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Type:}

  %--------------------------------

  \@tempdimb=478bp %

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Kennnummer:}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Serial number:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Auftraggeber:}

  \put(\@tempdimd,\@tempdimb){\ks@applicant@table}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Applicant:}

  \@tempdimb=377bp %

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Anzahl der Seiten:}

  \put(\@tempdimd,\@tempdimb){\ztotpages}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Number of pages:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Gesch\"aftszeichen:}

  \put(\@tempdimd,\@tempdimb){\ks@refNo}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Reference No.:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Kalibrierzeichen:}

  \put(\@tempdimd,\@tempdimb){\ks@calibMark}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Calibration mark:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Datum der Kalibrierung:}

  \put(\@tempdimd,\@tempdimb){\ks@calibDate}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Date of calibration:}

  %--------------------------------

  \@tempdime=\@tempdimd \advance\@tempdime185bp %

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Im Auftrag:}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape By order:}

  \put(\@tempdimd,\@tempdimb){\ks@location, \ks@certificateDate}

  \put(\@tempdime,\@tempdimb){Bearbeiter:}

  \put(\@tempdime,\@tempdimc){\scriptsize\itshape Examiner:}

  \advance\@tempdimb-24bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdimd,\@tempdimb){Siegel}

  \put(\@tempdimd,\@tempdimc){\scriptsize\itshape Seal}

  %--------------------------------

  \advance\@tempdimb-41bp %

  \put(\@tempdima,\@tempdimb){\ks@byOrder}

  \put(\@tempdime,\@tempdimb){\ks@examiner}

  %--------------------------------

  \put(52bp,170bp){\rotatebox[origin=c]{90}{\tiny 391~00B~k}}

}



\newcommand*\ks@head{%

  \begin{picture}(0,0)

    \unitlength=1bp %

    \put(-1,28){\parbox{\textwidth}{\normalfont\huge\bfseries\ks@PTB}}

    \put(-1,2){\parbox{\textwidth}{%

      \normalfont\small

      Seite~\thepage\ zum Kalibrierschein vom~\ks@certificateDate,

      Kalibrierzeichen:~\ks@calibMark \\

      \scriptsize\itshape

      Page~\thepage\ of calibration certificate of~\ks@certificateDate,

      calibration mark:~\ks@calibMark

    }}

  \end{picture}

}



\newcommand\ks@lastPage{%

  \large

  \textbf{\Large Die Physikalisch-Technische Bundesanstalt} (PTB) in

  Braunschweig und Berlin ist das nationale Metrologieinstitut und die

  technische Oberbeh\"orde der Bundesrepublik Deutschland f\"ur das

  Messwesen und Teile der Sicherheitstechnik. Die PTB geh\"ort zum

  Dienstbereich des Bundesministeriums f\"ur Wirtschaft und Energie.

  Sie erf\"ullt die Anforderungen an Kalibrier- und Pr\"uflaboratorien

  auf der Grundlage der DIN EN ISO/IEC 17025.



  Zentrale Aufgabe der PTB ist es, die gesetzlichen Einheiten in

  \"Ubereinstimmung mit dem Internationalen Einheitensystem (SI)

  darzustellen, zu bewahren und -- insbesondere im Rahmen des

  gesetzlichen und industriellen Messwesens -- weiterzugeben. Die PTB

  steht damit an oberster Stelle der metrologischen Hierarchie in

  Deutschland. Kalibrierscheine der PTB dokumentieren die

  R\"uckf\"uhrung des Kalibriergegenstandes auf nationale Normale.



  Dieser Ergebnisbericht ist in \"Ubereinstimmung mit den Kalibrier- und

  Messm\"oglichkeiten (CMCs), wie sie im Anhang C des gegenseitigen

  Abkommens (MRA) des Internationalen Komitees f\"ur Ma\ss e und

  Gewichte enthalten sind. Im Rahmen des MRA wird die G\"ultigkeit der

  Ergebnisberichte von allen teilnehmenden Instituten f\"ur die im

  Anhang C spezifizierten Messgr\"o\ss en, Messbereiche und

  Messunsicherheiten gegenseitig anerkannt (n\"ahere Informationen unter

  http://www.bipm.org).



  \begingroup

    \vspace{1.6\baselineskip}

    \centering

    \includegraphics[width=68bp]{CIPM-MRA.png}\par

    \vspace{1.6\baselineskip}

  \endgroup



  \itshape



  \textbf{\Large The Physikalisch-Technische Bundesanstalt} (PTB) in

  Braunschweig and Berlin is the National Metrology Institute and the

  highest technical authority of the Federal Republic of Germany for the

  field of metrology and certain sectors of safety engineering. The PTB

  comes under the auspices of the Federal Ministry of Economics and Energy.

  It meets the requirements for calibration and testing

  laboratories as defined in the EN ISO/IEC 17025.



  It is fundamental task of the PTB to realize and maintain the legal

  units in compliance with the International System of Units (SI) and to

  disseminate them, above all within the framework of legal and

  industrial metrology. The PTB thus is on top of the metrological

  hierarchy in Germany. Calibration certificates issued by it document

  that the object calibrated is traceable to national standards.



  This certificate is consistent with Calibration and Measurement

  Capabilities (CMCs) that are included in Appendix C of the Mutual

  Recognition Arrangement (MRA) drawn up by the International Committee

  for Weights and Measures (CIPM). Under the MRA, all participating

  institutes recognize the validity of each other's calibration and

  measurement certificates for the quantities, ranges and measurements

  uncertainties specified in Appendix C (for details see

  http://www.bipm.org).



  \vfill \mbox{}

}



\newcommand*\ks@@foot{%

  \begin{picture}(0,0)

    \unitlength=1bp %

    \put(-7,23){\linethickness{1.3bp}\line(1,0){506}}

    \normalfont\small

    \put(-1,9){Physikalisch-Technische Bundesanstalt}

    \scriptsize

    \put(-1,-3){\parbox[t]{.25\textwidth}{%

       Bundesallee 100 \\

       38116 Braunschweig \\

       DEUTSCHLAND

    }}

    \put(280,-3){\parbox[t]{.25\textwidth}{%

       Abbestra\ss e 2--12 \\

       10587 Berlin \\

       DEUTSCHLAND

    }}

  \end{picture}

}



\endinput

%%

%% End of file `KK-0000.clo'.

kalibrierschein/KK-2015.clo

deleted100644 → 0
+0 −239
Original line number Diff line number Diff line 


\ProvidesFile{KK-2015.clo}[2015/12/10 v1.0c class option (RN/PTB)]



\iffalse



Definitionen, die ab Januar 2015 gültig sind.



\fi



\RequirePackage[%

headheight=44bp,

marginparwidth=0pt,

left=69bp,

right=40bp,

textheight=609bp,

top=164bp,

headsep=77bp,

footskip=0bp,

]{geometry}



\newcommand*\ks@printFirstPage{%

  \unitlength=1bp %

  \AtPageLowerLeft{%

    %------------- Kopf ------------

    %%%\put(69,783){\parbox{\textwidth}{\huge\bfseries\ks@PTB}}

    %%%\put(69,760){\parbox{\textwidth}{\large\bfseries\ks@BSuB}}

    \put(68,754){\includegraphics[width=308bp]{PTB-logo-2015.pdf}}

    \put(287,680){\includegraphics[width=62bp]{Adler.pdf}}

    \put(252,640){\normalfont\huge Kalibrierschein}

    \put(260,622){\normalfont\itshape\large Calibration Certificate}

    %-----------Mittelteil ---------

    \ks@put@main

    %------------- Fuss ------------

    %%%\put(-18bp,38bp){\rotatebox{90}{\xscriptsize 391~00B~k}}

    %%%\put(62,83){\linethickness{1.3bp}\line(1,0){506}}

    \normalfont\scriptsize

    \put(68,68){\parbox[t]{\textwidth}{%

       Kalibrierscheine ohne Unterschrift und Siegel haben keine G\"ultigkeit.

       Dieser Kalibrierschein darf nur unver\"andert weiterverbreitet\\

       werden. Ausz\"uge bed\"urfen der Genehmigung der

       Physikalisch-Technischen Bundesanstalt. \\

       \normalfont\itshape

       Calibration certificates without signature and seal are not valid.

       This calibration certificate may not be reproduced other than in

       full. \\ Extracts may be taken only with permission of the

       Physikalisch-Technische Bundesanstalt.

    }}

  }

}



\newcommand\ks@put@main{%

  \normalfont\normalsize

  \@tempdima=68bp %

  \@tempdimb=648bp %

  \@tempdimd=207bp %

  %--------------------------------

  \advance\@tempdimb-60bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Gegenstand:}

  \put(\@tempdimd,\@tempdimb){\ks@object}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Object:}

  %--------------------------------

  \advance\@tempdimb-60bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Hersteller:}

  \put(\@tempdimd,\@tempdimb){\ks@printDevicesTable{348bp}{46bp}{29bp}}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Manufacturer:}

  %--------------------------------

  \advance\@tempdimb-60bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Typ:}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Type:}

  %--------------------------------

  %%%\@tempdimb=478bp %

  \@tempdimb=455bp %

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Kennnummer:}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Serial No.:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Auftraggeber:}

  \put(\@tempdimd,\@tempdimb){\ks@applicant@table}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Applicant:}

  \@tempdimb=377bp %

  %--------------------------------

  \advance\@tempdimb-53bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Anzahl der Seiten:}

  \put(\@tempdimd,\@tempdimb){\ztotpages}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Number of pages:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Gesch\"aftszeichen:}

  \put(\@tempdimd,\@tempdimb){\ks@refNo}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Reference No.:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Kalibrierzeichen:}

  \put(\@tempdimd,\@tempdimb){\ks@calibMark}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Calibration mark:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Datum der Kalibrierung:}

  \put(\@tempdimd,\@tempdimb){\ks@calibDate}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Date of calibration:}

  %--------------------------------

  \@tempdime=\@tempdimd \advance\@tempdime185bp %

  \advance\@tempdimb-30bp %

  %%%\@tempdimb=204bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Im Auftrag}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape On behalf of PTB}

  \put(\@tempdimd,\@tempdimb){\ks@location, \ks@certificateDate}

  \put(\@tempdime,\@tempdimb){Im Auftrag}

  \put(\@tempdime,\@tempdimc){\scriptsize\itshape On behalf of PTB}

  \advance\@tempdimb-24bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdimd,\@tempdimb){Siegel}

  \put(\@tempdimd,\@tempdimc){\scriptsize\itshape Seal}

  %--------------------------------

  \advance\@tempdimb-40bp %

  \put(\@tempdima,\@tempdimb){\ks@byOrder}

  \put(\@tempdime,\@tempdimb){\ks@examiner}

  %--------------------------------

  \put(46bp,178bp){\rotatebox[origin=c]{90}{\tiny 391~00B~n}}

}



\newcommand*\ks@head{%

  \begin{picture}(0,0)

    \unitlength=1bp %

    %%%\put(-1,28){\parbox{\textwidth}{\normalfont\huge\bfseries\ks@PTB}}

    \put(-1,-5){\includegraphics[width=308bp]{PTB-logo-2015.pdf}}

    \put(-1,-35){\parbox{\textwidth}{%

      \normalfont\small

      Seite~\thepage\ zum Kalibrierschein vom~\ks@certificateDate,

      Kalibrierzeichen:~\ks@calibMark \\

      \scriptsize\itshape

      Page~\thepage\ of the Calibration Certificate dated~\ks@certificateDate,

      calibration mark:~\ks@calibMark

    }}

  \end{picture}

}





\newcommand\ks@lastPage{%

  \large



  \begin{otherlanguage}{ngerman}



  \textbf{\Large Die Physikalisch-Technische Bundesanstalt} (PTB) in

  Braunschweig und Berlin ist das nationale Metrologieinstitut und die

  technische Oberbeh\"orde der Bundesrepublik Deutschland f\"ur das

  Messwesen. Die PTB geh\"ort zum Gesch\"aftsbereich des Bundesministeriums

  f\"ur Wirtschaft und Energie. Sie erf\"ullt die Anforderungen an Kalibrier-

  und Pr\"uflaboratorien auf der Grundlage der DIN EN ISO/IEC 17025.



  Zentrale Aufgabe der PTB ist es, die gesetzlichen Einheiten in

  \"Ubereinstimmung mit dem Internationalen Einheitensystem (SI) darzustellen,

  zu bewahren und weiterzugeben. Die PTB steht damit an oberster Stelle der

  metrologischen Hierarchie in Deutschland. Die Kalibrierscheine der PTB

  dokumentieren eine auf nationale Normale r\"uckgef\"uhrte Kalibrierung.



  Dieser Ergebnisbericht ist in \"Ubereinstimmung mit den Kalibrier- und

  Messm\"oglichkeiten (CMCs), wie sie im Anhang~C des gegenseitigen

  Abkommens (MRA) des Internationalen Komitees f\"ur Ma\ss e und

  Gewichte enthalten sind. Im Rahmen des MRA wird die G\"ultigkeit der

  Ergebnisberichte von allen teilnehmenden Instituten f\"ur die im

  Anhang~C spezifizierten Messgr\"o\ss en, Messbereiche und

  Messunsicherheiten gegenseitig anerkannt (n\"ahere Informationen unter

  http://www.bipm.org).



  \end{otherlanguage}



  \begingroup

    \vspace{1.6\baselineskip}

    \centering

    \includegraphics[width=68bp]{CIPM-MRA.png}\par

    \vspace{1.6\baselineskip}

  \endgroup



  \itshape



  \begin{otherlanguage}{english}



  \textbf{\Large The Physikalisch-Technische Bundesanstalt} (PTB) in

  Braunschweig and Berlin is the National Metrology Institute and the

  supreme technical authority of the Federal Republic of Germany for metrology.

  The PTB comes under the auspices of the Federal Ministry of Economics and

  Energy. It meets the requirements for calibration and testing laboratories as

  defined in DIN EN ISO/IEC 17025.



  The central task of PTB is to realize, to maintain and to disseminate the

  legal units in compliance with the International System of Units (SI). PTB

  thus is at the top of the metrological hierarchy in Germany. The calibration

  certificates issued by PTB document a calibration traceable to national

  measurement standards.



  This certificate is consistent with the Calibration and Measurement

  Capabilities (CMCs) that are included in Appendix~C of the Mutual

  Recognition Arrangement (MRA) drawn up by the International Committee for

  Weights and Measures (CIPM). Under the MRA, all participating institutes

  recognize the validity of each other’s calibration and measurement

  certificates for the quantities, ranges and measurement uncertainties

  specified in Appendix~C (for details, see http://www.bipm.org).



  \end{otherlanguage}



  \vfill \mbox{}

}



\newcommand*\ks@@foot{%

  \begin{picture}(0,0)

    \unitlength=1bp %

    %%%\put(-7,23){\linethickness{1.3bp}\line(1,0){506}}

    \normalfont\small

    \put(-1,9){Physikalisch-Technische Bundesanstalt}

    \scriptsize

    \put(-1,-3){\parbox[t]{.25\textwidth}{%

       Bundesallee 100 \\

       38116 Braunschweig \\

       DEUTSCHLAND

    }}

    \put(280,-3){\parbox[t]{.25\textwidth}{%

       Abbestra\ss e 2--12 \\

       10587 Berlin \\

       DEUTSCHLAND

    }}

  \end{picture}

}



\endinput

%%

%% End of file `KK-2015.clo'.

kalibrierschein/KK-2019.clo

deleted100644 → 0
+0 −17
Original line number Diff line number Diff line 


\ProvidesFile{KK-2019.clo}[2019/03/07 v1.0d class option (RN/PTB)]



% Kundenkalibrierung



\newcommand*\ks@nationalEmblem{\includegraphics[width=62bp]{Adler.pdf}}

\newcommand*\ks@first@signature{%

  \put(\@tempdima,\@tempdimb){Im Auftrag}%

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape On behalf of PTB}%

} 

\newcommand*\ks@first@signature@content{%

  \put(\@tempdima,\@tempdimb){\ks@byOrder}%

}



\endinput

%%

%% End of file `KK-2019.clo'.

kalibrierschein/README.md

deleted100644 → 0
+0 −18
Original line number Diff line number Diff line 
## Kalibrierschein

Das Projekt enthält eine LaTeX-Dokumentenklasse und andere Komponenten zur Erzeugung eines PTB-konformen Kalibrierscheins.



Zur Erzeugung eines Kalibrierscheins als PDF-Datei ist Folgendes zu tun:

```

xelatex test-ks-KK.tex # oder: xelatex test-ks-IK.tex

xelatex test-ks-KK.tex # oder: xelatex test-ks-IK.tex

```

(KK=Kundenkalibrierung und IK=Interne kalibrierung)



Es sind zwei LaTeX-Läufe nötig, um alle Referenzen (z.B. Anzahl der Seiten) aufzulösen. Der TeX-Compiler muss Zugriff zu den Grafikdateien "Adler.pdf", PTB-logo-KS-2015.pdf und "CIPM-MRA.png" haben.



### Testdateien



* `test-ks-IK.tex`. Interne Kalibrierungen. Die Klassenoption `IK` wählt die Datei `IK.tex` mit angepassten Definitionen der Titelseite aus. Mit der Klassenoption `2015` wird das neue seit dem Jahre 2015 gültige Layout ausgewählt.



* `test-ks-KK.tex`. Kundenkalibrierung. Die Klassenoption `KK` wählt die Datei `KK.tex` mit angepassten Definitionen der Titelseite aus. Mit der Klassenoption `2015` wird das neue seit dem Jahre 2015 gültige Layout ausgewählt.

kalibrierschein/kalibrierschein.cls

deleted100644 → 0
+0 −468
Original line number Diff line number Diff line 


\setcounter{errorcontextlines}{100}

\RequirePackage{ifdraft}

\newcommand*\ks@location{Berlin}

\newcommand*\ks@kalType{KK}

\newcommand*\ks@layout{-2019}% derzeit nicht variabel

\newcommand*\ks@langs{ngerman,main=english}

\NeedsTeXFormat{LaTeX2e}[1999/12/01]

\ProvidesClass{kalibrierschein}

  [2019/03/21 v0.4c Dokumentenklasse (RN/PTB)]

\DeclareOption{BS}{\def\ks@location{Braunschweig}}

\DeclareOption{BLN}{\def\ks@location{Berlin}}

\DeclareOption{KK}{\edef\ks@kalType{\CurrentOption}}

\DeclareOption{IK}{\edef\ks@kalType{\CurrentOption}}

%\DeclareOption{2015}{\edef\ks@layout{-\CurrentOption}}

\DeclareOption{german}{\def\ks@langs{english,main=ngerman}}

\DeclareOption{ngerman}{\def\ks@langs{english,main=ngerman}}

\DeclareOption{de}{\def\ks@langs{english,main=ngerman}}

\DeclareOption{english}{\def\ks@langs{ngerman,main=english}}

\DeclareOption{en}{\def\ks@langs{ngerman,main=english}}

\DeclareOption*{\PassOptionsToClass{\CurrentOption}{scrartcl}}

\ProcessOptions\relax

\PassOptionsToPackage{paper=a4,pagesize,twoside=false,headinclude}

  {typearea}



\newcommand*\ks@doc@style@code{391 00B o}% Kennung der Word-Vorlage



\LoadClass[%

,fontsize=11pt

,headings=small

,numbers=enddot

,parskip=half

]{scrartcl}



\RequirePackage[%

headheight=0bp,

marginparwidth=0pt,

left=69bp,

textwidth=489bp,

textheight=669bp,

top=85bp,

headsep=0bp,

head=12.85pt,%???

footskip=0bp,

]{geometry}



\raggedbottom % ???



%\RequirePackage{showframe}



\RequirePackage[\ks@langs]{babel}

\RequirePackage[autostyle=true,german=guillemets,maxlevel=3]{csquotes}%

\RequirePackage{iflang}

\IfLanguageName{ngerman}{%

  \newcommand*\ks@draftName{Entwurf}%

  \AtEndOfClass{\shorthandon{"}}

  \defineshorthand{"`}{\openautoquote}

  \defineshorthand{"'}{\closeautoquote}

}{%

  \newcommand*\ks@draftName{Draft}%

}

\MakeAutoQuote{»}{«}

\AtEndOfClass{%

  \@ifpackageloaded{inputenc}{}{%

    \catcode`\»=\active

    \catcode`\«=\active

  }%

}



% nach scrsize11pt.clo

\def\normalsize{%

  \@setfontsize\normalsize{11.2}{12.85}%

  \abovedisplayskip 11\p@ \@plus3\p@ \@minus6\p@

  \abovedisplayshortskip \z@ \@plus3\p@

  \belowdisplayshortskip 6.5\p@ \@plus3.5\p@ \@minus3\p@

  \belowdisplayskip \abovedisplayskip

  \let\@listi\@listI

}



\def\huge{\@setfontsize\huge{20.26}{25.3}}

\def\large{\@setfontsize\large{12.17}{14.2}}

\def\tiny{\@setfontsize\tiny\@viipt\@viiipt}



\RequirePackage{textcomp}



\RequirePackage{tabularx}

\let\ks@TX@endtabularx=\TX@endtabularx

\newcommand*\origTabularx{%

  \let\TX@endtabularx=\ks@TX@endtabularx

}

\RequirePackage{ltablex}\keepXColumns{}

\setcounter{LTchunksize}{100}



\PassOptionsToPackage{final}{graphicx}

\RequirePackage{eso-pic,graphicx,booktabs}

\RequirePackage{zref-totpages}



\newif\ifXeOrLua \XeOrLuafalse

\RequirePackage{ifxetex,ifluatex,ifpdf}



\ifxetex% XeTeX

  \XeOrLuatrue

\else

  \ifluatex% LuaTeX

    \XeOrLuatrue

  \else

    \ifpdf% pdfTeX

    \else% TeX+dvips

    \fi

  \fi

\fi 



\RequirePackage{amsmath}



\ifXeOrLua% XeLaTeX oder luaLaTeX



\typeout{#### XeLaTeX oder luaLaTeX}



%\RequirePackage[no-math]{fontspec}

\RequirePackage{unicode-math}



\iffalse 

  

\setmathfont{Asana-Math.otf}[math-style=ISO,bold-style=ISO]% damit sind Einheiten kursiv

\setmathfont{texgyreheros-regular.otf}[range=\mathup,Scale=MatchLowercase]

\setmathfont{texgyreheros-italic.otf}[range=\mathit,Scale=MatchLowercase]

\setmathfont{texgyreheros-bold.otf}[range=\mathbfup,Scale=MatchLowercase]

\setmathfont{texgyreheros-bolditalic.otf}[range=\mathbfit,Scale=MatchLowercase]

\setmathfont{texgyreheros-regular.otf}[range=\mathsfup,Scale=MatchLowercase]

\setmathfont{texgyreheros-italic.otf}[range=\mathsfit,Scale=MatchLowercase]

\setmathfont{texgyreheros-bold.otf}[range=\mathbfsfup,Scale=MatchLowercase]

\setmathfont{texgyreheros-bolditalic.otf}[range=\mathbfsfit,Scale=MatchLowercase]

\setmathfont{texgyreheros-regular.otf}[range=\mathpunct]

\setmathfont{Asana-Math.otf}[range=\int]

% (Ulrike): )als letztes immer einen

% richtiger Mathfont, damit diverse Werte korrekt gesetzt werden.

% Wirklich nötig?



\else



%%%\RequirePackage{firamath-otf} % passt doch nicht gut zu Helvetica (Arial))



%%%\setmathfont{GFSNeohellenicMath.otf}%

%%%  [math-style=ISO,bold-style=ISO,Scale=MatchUppercase]



%%%  \renewcommand*\familydefault{\sfdefault}

%%%  \RequirePackage[cmintegrals]{newtxsf}



\RequirePackage{unicode-math}

\setmainfont{texgyreheros}[

  Ligatures=TeX,

  Extension=.otf,

  UprightFont=*-regular,

  BoldFont=*-bold,

  ItalicFont=*-italic,

  BoldItalicFont=*-bolditalic.otf] 

\RequirePackage[usefilenames,weight=Regular]{firamath-otf}

\RequirePackage[italic]{mathastext}



\renewcommand*\sfdefault{\familydefault}



% Abstandskorrektur; Bug-Report an Autor von "mathastext"?  

\def\prim@s{\/\prime\futurelet\@let@token\pr@m@s}

\AtBeginDocument{\let\PRIME\prime

  \def\prime{\mkern2mu\PRIME}%

}



\fi 



\RequirePackage{newunicodechar}

\newunicodechar{^^^^202f}{\,}% 'NARROW NO-BREAK SPACE' (\u202F, 8239)

\newunicodechar{^^^^2009}{\,\hspace{0pt}}% 'THIN SPACE'

\newunicodechar{^^^^00ad}{\-}% 'SOFT HYPHEN'

\newunicodechar{^^^^2207}{{\setmathfont{Asana Math}^^^^2207}}% 'NABLA'



%%% TODO: ^^^^ unschädlich machen für pdflatex



\else



\typeout{#### pdfLaTeX}



\RequirePackage{fix-cm}% ???

\RequirePackage[T1]{fontenc}

\RequirePackage[utf8]{inputenc}

\DeclareUnicodeCharacter{202F}{\,}

\DeclareUnicodeCharacter{2009}{\,\hspace{0pt}}

\DeclareUnicodeCharacter{22C5}{\cdot}

\DeclareUnicodeCharacter{03B8}{\theta}

\RequirePackage[scale=1]{tgheros}

%%%\RequirePackage[scaled=1]{helvet}

\renewcommand*\familydefault{\sfdefault}

%%%\newcommand*\mathfamilydefault{\familydefault}

%%\newcommand*\math@sfdefault{\sfdefault}



\RequirePackage{sfmath}



\fi



\RequirePackage[neverdecrease]{paralist}

\let\itemize\compactitem

\let\enditemize\endcompactitem

\let\enumerate\compactenum

\let\endenumerate\endcompactenum

\let\description\compactdesc

\let\enddescription\endcompactdesc

\pltopsep=\medskipamount

\plitemsep=\smallskipamount



\newcommand*\ks@PTB{Physikalisch-Technische Bundesanstalt}

\newcommand*\ks@BSuB{Braunschweig und Berlin}



\RequirePackage{picture}



\let\@tempdimd=\@clnwd

\let\@tempdime=\@clnht

\let\@tempdimf=\@dashdim



\newcommand*\ks@tempa{}

\newcommand*\ks@tempb{}

\newcommand*\ks@tempc{}

\newcommand*\ks@tempd{}

\newcommand*\ks@tempe{}



\newtoks\ks@tab

\newcommand*\ks@colSpec{}



\newcommand*\ks@add[1]{%

  \ks@tab\expandafter{\the\ks@tab#1}%

}



\newcommand*\ks@addTabLine[1]{%

  \def\@tempc{}%  

  \@for\@tempa:=#1\do{%

    \edef\@tempb{\noexpand\ks@tab\noexpand\expandafter{%

      \the\noexpand\ks@tab\@tempc\@tempa}}%

    \@tempb

    \def\@tempc{\noexpand&}% \noexpand hier unnötig, aber ...

  }%

}



\newcommand*\ks@getColSpec[2]{%

  \let#2=\@empty

  \@for\@tempa:=#1\do{%

    \edef#2{#2X}%

  }%

  \ifx#2\@empty

    %\def#2{l}%

    \def#2{X}%

  \fi

}



\newcommand*\ks@printDevicesTable[3]{% #1 = width, #2 = 1. offset, #3 = 2. offset

  \ks@tab{}%

  \ks@getColSpec{\ks@type}{\ks@colSpec}%

  \edef\@tempa{\noexpand\begin{tabularx}{#1}[t]{@{}\ks@colSpec @{}}}%

  \ks@tab\expandafter{\@tempa}%

  \ks@addTabLine{\ks@manufacturer}%

  \ks@add{\tabularnewline[#2]}%

  \ks@addTabLine{\ks@type}%

  \ks@add{\tabularnewline[#3]}%

  \ks@addTabLine{\ks@serialNo}%

  %%\ks@add{\ks@serialNo}%

  %%\ks@addCommaItems{\ks@serialNo}% ???

  \ks@add{\end{tabularx}}%

  \begingroup

    \tabcolsep=1em %

    \origTabularx

    %\showthe\ks@tab

    \the\ks@tab

  \endgroup

}



%\RequirePackage[manualmark]{scrpage2}

\RequirePackage[manualmark,draft=false]{scrlayer-scrpage}

\clearpairofpagestyles

\lohead{\ks@head}

\lofoot{\ks@foot}



\definecolor{PTBcolor}{RGB}{0,155,206}





\input{ks-common.clo}% Titelseiten- und Layout-Definition

\input{\ks@kalType\ks@layout.clo}% Titelseiten- und Layout-Definition



\newcommand*\ks@type{%

  Typ des Ger\"ates}

\newcommand*\type[1]{\xdef\ks@type{\trim@spaces{#1}}}



\newcommand*\ks@manufacturer{Namen der Hersteller}

\newcommand*\manufacturer[1]{%

  \xdef\ks@manufacturer{\trim@spaces{\detokenize{#1}}}%

}



\newcommand*\ks@object{%

  Name des Ger\"ates, kurze Charakterisierung}

\newcommand*\object[1]{\xdef\ks@object{\trim@spaces{#1}}}



\newcommand*\ks@applicant{%

  Name des Auftraggebers, Stra\ss e, Firmensitz}

\newcommand*\applicant[1]{\long\gdef\ks@applicant{#1}}



\newcommand*\ks@serialNo{XXX,YYY}

\newcommand*\serialNo[1]{%

  \xdef\ks@serialNo{\trim@spaces{\detokenize{#1}}}%

}



\newcommand*\ks@refNo{YYY-ZZZZZZZZ}

\newcommand*\refNo[1]{\xdef\ks@refNo{\trim@spaces{#1}}}



\newcommand*\ks@calibMark{YYY-XXXXXXX}

\newcommand*\calibMark[1]{\xdef\ks@calibMark{\trim@spaces{#1}}}



\newcommand*\ks@referenceMark{YYY-XXXXXXX}

\newcommand*\referenceMark[1]{\xdef\ks@referenceMark{\trim@spaces{#1}}}



\newcommand*\ks@calibDate{????-??-??}

\newcommand*\calibDate[1]{\xdef\ks@calibDate{\trim@spaces{#1}}}



\newcommand*\ks@certificateDate{????-??-??}

\newcommand*\certificateDate[1]{\xdef\ks@certificateDate{\trim@spaces{#1}}}



\newcommand*\ks@byOrder{Peter Silie}

\newcommand*\byOrder[1]{\xdef\ks@byOrder{\trim@spaces{#1}}}



\newcommand*\ks@examiner{Ellen Bogen}

\newcommand*\examiner[1]{\xdef\ks@examiner{\trim@spaces{#1}}}



\newcommand*\ks@missingEntries{0}

\newcommand*\missingEntries[1]{\xdef\ks@missingEntries{\trim@spaces{#1}}}



\newcolumntype{C}{>{\centering\arraybackslash}X}



\RequirePackage{siunitx-PTB}



\newcommand\resultTable[3][]{%

  %\begingroup

  \@tempcnta=#2 %

  \@tempcntb=\numexpr(\@tempcnta-1)*2 %

  \@tempdimc=\dimexpr (\textwidth - \@tempcntb\tabcolsep) / \@tempcnta %

  \@tempcntb=\@tempcnta

  \def\@tempa{}%

  \loop\ifnum\@tempcnta>\z@

    %%%\edef\@tempa{\@tempa S[table-column-width=\the\@tempdimc]}% ???

    \edef\@tempa{\@tempa r}%

    \advance\@tempcnta\m@ne

  \repeat

  \edef\@tempa{\noexpand\begin{longtable}{@{}\@tempa @{}}}%

  \expandafter\ks@add\expandafter{\@tempa}%

  \ks@add{\\\toprule}%

  \ifx\relax#1\relax\else

    \ks@add{\multicolumn{\the\@tempcntb}{@{}c@{}}{#1}\\\toprule}%

  \fi

  \ks@add{#3}%

  \ks@add{\bottomrule\end{longtable}}%

  %\endgroup

}



\newcommand*\printFirstPage{%

  \thispagestyle{empty}%

  \AddToShipoutPicture*{\ks@printFirstPage}%

  \mbox{}\clearpage

  \global\let\ks@printFirstPage\@empty

  \global\let\printFirstPage\@empty

}



\newcommand*\ks@@foot{}



\newcommand*\printLastPage{%

  \clearpage

  \global\let\ks@@foot=\ks@foot@add

  \ks@lastPage

}



\newcommand*\printResultTable{%

  \begingroup

    \LTleft=\fill \LTright=\fill% Tabelle zentriert

    \sisetup{%

      retain-zero-exponent

    }%

    \the\ks@tab

  \endgroup

}



\newcommand*\ks@applicant@table{%

  \begingroup

    \let\ks@tempa=\\%

    \let\\=\relax

    \ks@tab{}%

    \expandafter\@tfor\expandafter\ks@tempb\expandafter

      :\expandafter=\ks@applicant\do{%

      \expandafter\edef\expandafter\ks@tempb\expandafter{%

        \expandafter\trim@spaces\expandafter{\ks@tempb}}%

      \ifx\ks@tempb\@empty\else

        \expandafter\ks@add\expandafter{\ks@tempb\tabularnewline}%

      \fi  

    }%

    \let\\=\ks@tempa

    \extrarowheight=-.1ex %

    \begin{tabular}[t]{@{}l@{}}%

      \the\ks@tab

    \end{tabular}%

  \endgroup

}



\AtBeginDocument{

  \ifdraft{

    \AddToShipoutPictureBG{%

      \AtTextCenter{%

        \makebox(0,0)[c]{\resizebox{\textwidth}{!}{%

          \rotatebox{54.7}{%

            \textnormal{\textsf{\textbf{%

              \color{lightgray}\ks@draftName}}}}}}%

      }%

    }%

  }{%

    \ifnum\number\ks@missingEntries>0 %

      \AddToShipoutPictureBG{%

        \AtTextCenter{%

          \makebox(0,0)[c]{\resizebox{\textwidth}{!}{%

            \rotatebox{54.7}{%

              \textnormal{\textsf{\textbf{%

                \color{lightgray}Fehler:~\ks@missingEntries}}}}}}%

        }%

      }%

    \fi  

  }

}



\RequirePackage[

% factor=1500

% ,verbose=true

,final=true

% ,letterspace=100

,babel=true

]{microtype}



\emergencystretch=1em %

\pagestyle{scrheadings}



\renewcommand\section{%

  \@startsection{section}% name

  {1}% level

  {\z@}% indent

  {-3ex \@plus -.5ex \@minus -.2ex}% beforeskip (abs.!)

  {.6ex \@plus.2ex}%   afterskip

  {\ifnum \scr@compatibility>\@nameuse{scr@v@2.96}\relax

    \setlength{\parfillskip}{\z@ plus 1fil}\fi

    \raggedsection\normalfont\sectfont\nobreak\size@section}%

}



\endinput

%%

%% End of file `kailbrierschein.cls'.



sudo cp $(kpsewhich --var-value TEXMFSYSVAR)/fonts/conf/texlive-fontconfig.conf /etc/fonts/conf.d/09-texlive.conf



sudo fc-cache -fsv



mkluatexfontdb --force --verbose=-1 -vvv

kalibrierschein/ks-common.clo

deleted100644 → 0
+0 −245
Original line number Diff line number Diff line 


\ProvidesFile{ks-common.clo}[2019/03/07 v1.0a class option (RN/PTB)]



%%% Definitionen, die ab 2019 gültig sind.



\newcommand*\ks@printFirstPage{%

  \unitlength=1bp %

  \AtPageLowerLeft{%

    %------------- Kopf ------------

    \put(68,763){\includegraphics[width=99bp]{PTB-Logo.pdf}}

    \put(287,679){\ks@nationalEmblem}

    \put(67,750){\footnotesize 

      \resizebox{157bp}{!}{Physikalisch-Technische Bundesanstalt}}

    \put(67,739){\footnotesize 

      \resizebox{117bp}{!}{Nationales Metrologieinstitut}}

    \put(252,655){\normalfont\huge Kalibrierschein}

    \put(266,637){\normalfont\itshape\normalsize Calibration Certificate}

    %-----------Mittelteil ---------

    \ks@put@main

    %------------- Fuss ------------

    \normalfont\scriptsize

    \put(68,86){\parbox[t]{\textwidth}{%

      Kalibrierscheine ohne Unterschrift und Siegel haben keine G\"ultigkeit.

      Dieser Kalibrierschein darf nur unver\"andert weiterverbreitet\\

      werden. Ausz\"uge bed\"urfen der Genehmigung der

      Physikalisch-Technischen Bundesanstalt. 

      Die dargestellten Ergebnisse beziehen\\

      sich nur auf die kalibrierten Gegenstände.\\[.2ex]

      \normalfont\itshape

      Calibration certificates without signature and seal are not valid.

      This calibration certificate may not be reproduced other than in

      full. \\ Extracts may be taken only with permission of the

      Physikalisch-Technische Bundesanstalt. 

      The presented results relate only to\\

      the items calibrated.

    }}

  }

}



\newcommand\ks@put@main{%

  \normalfont\normalsize

  \@tempdima=68bp %

  \@tempdimb=660bp %

  \@tempdimd=207bp %

  %--------------------------------

  \advance\@tempdimb-60bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Gegenstand:}

  \put(\@tempdimd,\@tempdimb){\ks@object}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Object:}

  %--------------------------------

  \advance\@tempdimb-51bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Hersteller:}

  \put(\@tempdimd,\@tempdimb){\ks@printDevicesTable{348bp}{37bp}{33bp}}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Manufacturer:}

  %--------------------------------

  \advance\@tempdimb-51bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Typ:}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Type:}

  %--------------------------------

  \@tempdimb=452bp %

  %--------------------------------

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Kennnummer:}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Serial No.:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Auftraggeber:}

  \put(\@tempdimd,\@tempdimb){\ks@applicant@table}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Applicant:}

  \@tempdimb=377bp %

  %--------------------------------

  \advance\@tempdimb-12bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Anzahl der Seiten:}

  \put(\@tempdimd,\@tempdimb){\ztotpages}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Number of pages:}

  %--------------------------------

  \advance\@tempdimb-30bp % 

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Gesch\"aftszeichen:}

  \put(\@tempdimd,\@tempdimb){\ks@refNo}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Reference No.:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Kalibrierzeichen:}

  \put(\@tempdimd,\@tempdimb){\ks@calibMark}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Calibration mark:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Ort der Kalibrierung:}

  \put(\@tempdimd,\@tempdimb){PTB~\ks@location}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Location of calibration:}

  %--------------------------------

  \advance\@tempdimb-30bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdima,\@tempdimb){Datum der Kalibrierung:}

  \put(\@tempdimd,\@tempdimb){\ks@calibDate}

  \put(\@tempdima,\@tempdimc){\scriptsize\itshape Date of calibration:}

  %--------------------------------

  \@tempdime=\@tempdimd \advance\@tempdime185bp %

  \advance\@tempdimb-30bp %

  %%%\@tempdimb=204bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \ks@first@signature

  \put(\@tempdimd,\@tempdimb){\ks@location, \ks@certificateDate}

  \put(\@tempdime,\@tempdimb){Im Auftrag}

  \put(\@tempdime,\@tempdimc){\scriptsize\itshape On behalf of PTB}

  \advance\@tempdimb-24bp %

  \@tempdimc=\@tempdimb \advance\@tempdimc-10bp %

  \put(\@tempdimd,\@tempdimb){Siegel}

  \put(\@tempdimd,\@tempdimc){\scriptsize\itshape Seal}

  %--------------------------------

  \advance\@tempdimb-40bp %

  \ks@first@signature@content

  \put(\@tempdime,\@tempdimb){\ks@examiner} 

  %--------------------------------

  \put(46bp,256bp){\rotatebox[origin=c]{90}{\tiny \ks@doc@style@code}}

}



\newcommand*\ks@head{%

  \begin{picture}(0,0)

    \unitlength=1bp %

    \put(-1,24){\parbox{\textwidth}{%

      \normalfont\small

      Seite~\thepage\ zum Kalibrierschein vom~\ks@certificateDate,

      Kalibrierzeichen:~\ks@calibMark \\

      \scriptsize\itshape

      Page~\thepage\ of the Calibration Certificate dated~\ks@certificateDate,

      calibration mark:~\ks@calibMark

    }}

  \end{picture}

}





\newcommand\ks@lastPage{%



  \begin{otherlanguage}{ngerman}



  \textbf{\Large Die Physikalisch-Technische Bundesanstalt} (PTB) in

  Braunschweig und Berlin ist das nationale Metrologieinstitut und die

  technische Oberbeh\"orde der Bundesrepublik Deutschland f\"ur das

  Messwesen. Die PTB geh\"ort zum Gesch\"aftsbereich des Bundesministeriums

  f\"ur Wirtschaft und Energie. Sie erf\"ullt die Anforderungen an Kalibrier-

  und Pr\"uflaboratorien auf der Grundlage der DIN~EN ISO/IEC~17025.



  Zentrale Aufgabe der PTB ist es, die gesetzlichen Einheiten in

  \"Ubereinstimmung mit dem Internationalen Einheitensystem (SI) darzustellen,

  zu bewahren und weiterzugeben. Die PTB steht damit an oberster Stelle der

  metrologischen Hierarchie in Deutschland. Die Kalibrierscheine der PTB

  dokumentieren eine auf nationale Normale r\"uckgef\"uhrte Kalibrierung.



  Dieser Ergebnisbericht ist in \"Ubereinstimmung mit den Kalibrier- und

  Messm\"oglichkeiten (CMCs), wie sie im Anhang~C des gegenseitigen

  Abkommens (MRA) des Internationalen Komitees f\"ur Ma\ss e und

  Gewichte enthalten sind. Im Rahmen des MRA wird die G\"ultigkeit der

  Ergebnisberichte von allen teilnehmenden Instituten f\"ur die im

  Anhang~C spezifizierten Messgr\"o\ss en, Messbereiche und

  Messunsicherheiten gegenseitig anerkannt (n\"ahere Informationen unter

  http://www.bipm.org).

  

  Diese Aussage und das CIPM-MRA-Logo beziehen sich nur auf die Messergebnisse 

  in diesem Kalibrierschein.



  \end{otherlanguage}



  \begingroup

    \vspace{1.6\baselineskip}

    \centering

    \includegraphics[width=68bp]{CIPM-MRA.png}\par

    \vspace{1.6\baselineskip}

  \endgroup



  \itshape



  \begin{otherlanguage}{english}



  \textbf{\Large The Physikalisch-Technische Bundesanstalt} (PTB) in

  Braunschweig and Berlin is the National Metrology Institute and the

  supreme technical authority of the Federal Republic of Germany for metrology.

  The PTB comes under the auspices of the Federal Ministry of Economics and

  Energy. It meets the requirements for calibration and testing laboratories as

  defined in DIN~EN ISO/IEC 17025.

  

  The central task of PTB is to realize, to maintain and to disseminate the

  legal units in compliance with the International System of Units (SI). PTB

  thus is at the top of the metrological hierarchy in Germany. The calibration

  certificates issued by PTB document a calibration traceable to national

  measurement standards.

  

  This certificate is consistent with the Calibration and Measurement

  Capabilities (CMCs) that are included in Appendix~C of the Mutual

  Recognition Arrangement (MRA) drawn up by the International Committee for

  Weights and Measures (CIPM). Under the MRA, all participating institutes

  recognize the validity of each other’s calibration and measurement

  certificates for the quantities, ranges and measurement uncertainties

  specified in Appendix~C (for details, see http://www.bipm.org).

 

  The CIPM MRA Logo and this statement attest only to the measurement component 

  of the certificate.

 



  \end{otherlanguage}



  \vfill

  

  \normalfont

  

  \begin{tabular}{@{}p{.5\textwidth}@{\hspace{36bp}}p{.5\textwidth}@{}}

  \multicolumn{2}{@{}l@{}}{ \small Physikalisch-Technische Bundesanstalt } 

  \tabularnewline[.3ex]

  \parbox[b]{\linewidth}{

    \scriptsize Bundesallee 100 \\ 

    38116~Braunschweig \\

    DEUTSCHLAND

  } &

  \parbox[b]{\linewidth}{

    \scriptsize Abbestra\ss e 2--12 \\

    10587~Berlin \\

    DEUTSCHLAND

  } 

  \end{tabular}

  

}



\newcommand*\ks@foot{%

  \begin{picture}(0,0)

    \unitlength=1bp %

    \normalfont

    %%\put(0,-25){\includegraphics[width=304bp]{ks-footline.png}}%

    \put(-1,-55){\normalfont\footnotesize

      \resizebox{303bp}{!}{%

        \textcolor{PTBcolor}{PTB}~|~Physikalisch-Technische 

        Bundesanstalt~|~Nationales Metrologieinstitut}}

  \end{picture}

}



\endinput

%%

%% End of file `ks-common.clo'.

kalibrierschein/siunitx-PTB.sty

deleted100644 → 0
+0 −101
Original line number Diff line number Diff line 
% Rolf Niepraschk, PTB, Rolf.Niepraschk@ptb.de



\ProvidesPackage{siunitx-PTB}[2018/05/28 v0.1c Additions to `siunitx'' (PTB/RN)]



\RequirePackage{amsmath,siunitx}



\providecommand*\vl@tempa{}

\providecommand*\vl@tempb{}

\providecommand*\vl@tempc{}

\providecommand*\vl@tempd{}

\providecommand*\vl@tempe{}



\DeclareSIUnit\torr{Torr}

\DeclareSIUnit\mbar{\milli bar}

\DeclareSIUnit\bar{bar}

\DeclareSIUnit\sccm{sccm}% Standard Cubic Centimeters per Minute



%%%\AtBeginDocument{%

\sisetup{%

  %%%,exponent-product = \ensuremath { \cdot }     % wird per "locale" gesetzt

  %%%,inter-unit-product = \ensuremath{{}\cdot{}}  % wird per "locale" gesetzt

  %,output-exponent-marker=\text{E}

%  ,table-alignment = center

  %%%,table-number-alignment = center

  %%%,table-text-alignment = center

%  ,table-align-exponent = true

%  ,table-parse-only = true % ?!

  %,parse-numbers = false

%  ,table-format = +1.3e+1

  %%%,table-figures-integer = 1

  %%%,table-figures-decimal = 3

  %%%,table-figures-exponent = 2

  %%%,input-uncertainty-signs = +-

  %%%,output-open-uncertainty =

  %%%,output-close-uncertainty =

  %%,separate-uncertainty = true

  ,bracket-numbers = true

  %,per-mode = symbol

  ,per-mode = reciprocal

  %,per-mode=symbol-or-fraction

  ,mode = text % !!!

  ,tight-spacing = false

  ,separate-uncertainty

  %%%,inter-unit-product = \ensuremath{{}\cdot{}}

  % weil default ( {}^{\circ} ) manchmal problematisch ("firamath"!?) 

  ,text-degree = \textdegree

  ,math-degree = \textdegree  

  ,math-celsius = \textdegree\text{C}

  ,text-celsius = \textdegree\text{C}

}%     



%%%}

\AtBeginDocument{

  \sisetup{%

    ,inter-unit-product=\ensuremath{{}\cdot{}}

  }%

}



\RequirePackage{trimspaces}



\let\ke@orig@SI=\SI

\renewcommand*\SI[2][]{% tolerant gegenüber "?" statt Zahl

  \def\vl@tempa{#1}%

  \edef\vl@tempb{\trim@spaces{#2}}%

  \ks@SI@i

}

\newcommand*\ks@SI@i[2][]{%

  \def\vl@tempc{?}%

  \ifx\vl@tempb\vl@tempc

    \ensuremath{\textbf{??}}\,\si[#1]{#2}%

  \else

    \edef\vl@tempe{\noexpand\ke@orig@SI[\vl@tempa]{\vl@tempb}[#1]{#2}}%

    \vl@tempe

  \fi

}

\let\ke@orig@num=\num

\renewcommand*\num[1]{% tolerant gegenüber "?" statt Zahl

  \edef\vl@tempb{\trim@spaces{#1}}%

  \def\vl@tempc{?}%

  \ifx\vl@tempb\vl@tempc

    \ensuremath{\textbf{??}}%

  \else

    \ke@orig@num{#1}%

  \fi

}



\RequirePackage{iflang}

\AtBeginDocument{%

  \IfLanguageName{ngerman}{

    \sisetup{locale=DE}

  }{%

    \sisetup{locale=UK}

  }

}



\addto\extrasgerman{\sisetup{locale=DE}} 

\addto\extrasngerman{\sisetup{locale=DE}} 

\addto\extrasenglish{\sisetup{locale=US}}



\endinput

kalibrierschein/test-ks-IK-2015.tex

deleted100644 → 0
+0 −62
Original line number Diff line number Diff line 


%---------------------------

\listfiles

\documentclass[en,IK,2015]{kalibrierschein}

\resultTable{ 6 }{%

{\(p_{cal}\)}&{\(p_{ind}\)}&{\(p_r\)}&{\(p_{ind} - p_r\)}&{\(e\)}&{\(U(k=2)\)}\\

mbar&mbar&mbar&mbar&&\\\toprule\endhead

2.954E-08&3.27E-08&1.66E-09&3.10E-08&5.1E-02&2.6E-02\\

4.970E-08&5.35E-08&1.65E-09&5.19E-08&4.3E-02&2.4E-02\\

8.908E-08&9.53E-08&1.63E-09&9.37E-08&5.2E-02&2.4E-02\\

2.991E-07&3.17E-07&1.68E-09&3.15E-07&5.4E-02&2.4E-02\\

4.805E-07&5.29E-07&1.80E-09&5.27E-07&9.7E-02&2.4E-02\\

4.810E-07&5.29E-07&2.00E-09&5.27E-07&9.6E-02&2.4E-02\\

5.024E-07&5.30E-07&1.80E-09&5.28E-07&5.1E-02&2.4E-02\\

8.916E-07&9.37E-07&1.52E-09&9.35E-07&4.9E-02&2.2E-02\\

2.943E-06&3.07E-06&1.77E-09&3.07E-06&4.3E-02&2.2E-02\\

4.922E-06&5.13E-06&2.02E-09&5.13E-06&4.2E-02&2.2E-02\\

8.827E-06&9.25E-06&3.20E-09&9.24E-06&4.7E-02&2.2E-02\\

2.957E-05&3.05E-05&4.10E-09&3.05E-05&3.1E-02&2.2E-02\\

4.892E-05&5.01E-05&6.70E-09&5.01E-05&2.4E-02&2.2E-02\\

8.768E-05&8.87E-05&7.70E-09&8.87E-05&1.1E-02&2.2E-02\\

8.960E-05&8.88E-05&1.20E-08&8.88E-05&-9.1E-03&2.2E-02\\

8.768E-05&8.88E-05&1.00E-08&8.88E-05&1.3E-02&2.2E-02\\

}

\missingEntries{ 16 }

\object{ Stabil Ion Gauge }

\manufacturer{ Granville-Phillips }

\type{ EXT-Y | Stabil Ion Controler 370B }

\serialNo{ YEA06800 | 1449 }

\applicant{  { BOC EDWARDS }  { Marshall Road }  { EASTBOURNE, EAST SUSSEX }  { BN22 9BA } }

\refNo{ ? }

\calibMark{ QS 21/13  }

\referenceMark{ 7.5-4003 }

\calibDate{ 2013-11-26 }

\examiner{ Th.\,Bock }

\certificateDate{ 2013-12-18 }

\begin{document}



\printFirstPage

   \section{ Description of the calibration device }

       The device was shipped under atmospheric pressure kept in the producers plastic shell.

       A memory module belonging to the stabil ion gauge (serial 06800) was provided. It was active during calibration.

     \section{ Calibration procedure }

       The device was installed in a vertical orientation. Before calibration the gauge head was baked at \(?\) °C for \(?\) h. During the cool down phase the head was degassed for \(?\) minutes. At room temperature it was exposed for \(?\) h at \(?⋅10^{?}\) mbar argon for sputtering the ion collector.

       The sensitivity factor was kept at an value of  \(?\) mbar\(^{-1}\) during the calibration. The calibration was carried out with the following device settings:

       \begin{itemize}\item display: mbar\item filament: F1\item emission: L\item channel: A\end{itemize}

       Before each calibration point the residual pressure indication \(p_r\)  was checked.

       The temperature \(θ\)  during the calibration was \(?\) °C and varied from this value within \(\pm?\) °C.

       The device was calibrated with ? in the pressure range \(?⋅ 10^{?}\) mbar to \(?⋅10^{?}\) mbar by comparing its reading with the calibration pressure that was established by the primary standard CE3 of PTB applying the continuous expansion method.

     \section{ Relative error of indication }

       The correction factor \(CF\) given in the table below was calculated from the indicated pressure \(p_{ind}\) as follows:\[CF =\frac{p_{cal}}{p_{ind} - p_{r}}\] where \(p_{cal}\) denotes the calibration pressure as generated in the primary standard and \(p_{r}\) the reading at residual pressure. From this, the corrected pressure \(p\) can be calculated from the residual pressure indication and the indicated pressure by:\[p = CF (p_{ind} - p_{r})\]

       The uncertainty \(U\) of \(CF\) at the time of calibration is given in the last column of the table below. It includes the repeatability of \(p_{ind}\) for otherwise identical conditions (\(p_{cal}\), \(θ\)).\printResultTable

     \section{ Uncertainty of Calibration }

       The uncertainty \(U\) stated is the expanded measurement uncertainty obtained by multiplying the standard measurement uncertainty by the coverage factor \(k = 2\). It has been determined in accordance with the  “Guide to the Expression of Uncertainty in Measurement (GUM)”. The value of the measurand then normally lies, with a probability of approximately \(95\) \%. within the attributed coverage interval.\par \(95\)\,\%  95\,\% 95~\% \(95\) \%  \par

       95 \% 95 \%

   \printLastPage

\end{document}

%---------------------------





\(95\)\,\%  95\,\% 95~\%

kalibrierschein/test-ks-IK-2019.tex

deleted100644 → 0
+0 −61
Original line number Diff line number Diff line 


%---------------------------

\documentclass[en,IK,BLN]{kalibrierschein}

\resultTable{ 6 }{%

{\(p_{cal}\)}&{\(p_{ind}\)}&{\(p_r\)}&{\(p_{ind} - p_r\)}&{\(e\)}&{\(U(k=2)\)}\\

mbar&mbar&mbar&mbar&&\\\toprule\endhead

2.954E-08&3.27E-08&1.66E-09&3.10E-08&5.1E-02&2.6E-02\\

4.970E-08&5.35E-08&1.65E-09&5.19E-08&4.3E-02&2.4E-02\\

8.908E-08&9.53E-08&1.63E-09&9.37E-08&5.2E-02&2.4E-02\\

2.991E-07&3.17E-07&1.68E-09&3.15E-07&5.4E-02&2.4E-02\\

4.805E-07&5.29E-07&1.80E-09&5.27E-07&9.7E-02&2.4E-02\\

4.810E-07&5.29E-07&2.00E-09&5.27E-07&9.6E-02&2.4E-02\\

5.024E-07&5.30E-07&1.80E-09&5.28E-07&5.1E-02&2.4E-02\\

8.916E-07&9.37E-07&1.52E-09&9.35E-07&4.9E-02&2.2E-02\\

2.943E-06&3.07E-06&1.77E-09&3.07E-06&4.3E-02&2.2E-02\\

4.922E-06&5.13E-06&2.02E-09&5.13E-06&4.2E-02&2.2E-02\\

8.827E-06&9.25E-06&3.20E-09&9.24E-06&4.7E-02&2.2E-02\\

2.957E-05&3.05E-05&4.10E-09&3.05E-05&3.1E-02&2.2E-02\\

4.892E-05&5.01E-05&6.70E-09&5.01E-05&2.4E-02&2.2E-02\\

8.768E-05&8.87E-05&7.70E-09&8.87E-05&1.1E-02&2.2E-02\\

8.960E-05&8.88E-05&1.20E-08&8.88E-05&-9.1E-03&2.2E-02\\

8.768E-05&8.88E-05&1.00E-08&8.88E-05&1.3E-02&2.2E-02\\

}

\missingEntries{ 16 }

\object{ Stabil Ion Gauge }

\manufacturer{ Granville-Phillips }

\type{ EXT-Y | Stabil Ion Controler 370B }

\serialNo{ YEA06800 | 1449 }

\applicant{  { BOC EDWARDS }  { Marshall Road }  { EASTBOURNE, EAST SUSSEX }  { BN22 9BA } }

\refNo{ ? }

\calibMark{ QS 21/13  }

\referenceMark{ 7.5-4003 }

\calibDate{ 2013-11-26 }

\examiner{ Th.\,Bock }

\certificateDate{ 2013-12-18 }

\begin{document}



\printFirstPage

   \section{ Description of the calibration device }

       The device was shipped under atmospheric pressure kept in the producers plastic shell.

       A memory module belonging to the stabil ion gauge (serial 06800) was provided. It was active during calibration.

     \section{ Calibration procedure }

       The device was installed in a vertical orientation. Before calibration the gauge head was baked at \(?\) °C for \(?\) h. During the cool down phase the head was degassed for \(?\) minutes. At room temperature it was exposed for \(?\) h at \(?⋅10^{?}\) mbar argon for sputtering the ion collector.

       The sensitivity factor was kept at an value of  \(?\) mbar\(^{-1}\) during the calibration. The calibration was carried out with the following device settings:

       \begin{itemize}\item display: mbar\item filament: F1\item emission: L\item channel: A\end{itemize}

       Before each calibration point the residual pressure indication \(p_r\)  was checked.

       The temperature \(θ\)  during the calibration was \(?\) °C and varied from this value within \(\pm?\) °C.

       The device was calibrated with ? in the pressure range \(?⋅ 10^{?}\) mbar to \(?⋅10^{?}\) mbar by comparing its reading with the calibration pressure that was established by the primary standard CE3 of PTB applying the continuous expansion method.

     \section{ Relative error of indication }

       The correction factor \(CF\) given in the table below was calculated from the indicated pressure \(p_{ind}\) as follows:\[CF =\frac{p_{cal}}{p_{ind} - p_{r}}\] where \(p_{cal}\) denotes the calibration pressure as generated in the primary standard and \(p_{r}\) the reading at residual pressure. From this, the corrected pressure \(p\) can be calculated from the residual pressure indication and the indicated pressure by:\[p = CF (p_{ind} - p_{r})\]

       The uncertainty \(U\) of \(CF\) at the time of calibration is given in the last column of the table below. It includes the repeatability of \(p_{ind}\) for otherwise identical conditions (\(p_{cal}\), \(θ\)).\printResultTable

     \section{ Uncertainty of Calibration }

       The uncertainty \(U\) stated is the expanded measurement uncertainty obtained by multiplying the standard measurement uncertainty by the coverage factor \(k = 2\). It has been determined in accordance with the  “Guide to the Expression of Uncertainty in Measurement (GUM)”. The value of the measurand then normally lies, with a probability of approximately \(95\) \%. within the attributed coverage interval.\par \(95\)\,\%  95\,\% 95~\% \(95\) \%  \par

       95 \% 95 \%

   \printLastPage

\end{document}

%---------------------------





\(95\)\,\%  95\,\% 95~\%

kalibrierschein/test-ks-IK.tex

deleted100644 → 0
+0 −62
Original line number Diff line number Diff line 


%---------------------------

\listfiles

\documentclass[ngerman,IK]{kalibrierschein}

\resultTable{ 6 }{%

{\(p_{cal}\)}&{\(p_{ind}\)}&{\(p_r\)}&{\(p_{ind} - p_r\)}&{\(e\)}&{\(U(k=2)\)}\\

mbar&mbar&mbar&mbar&&\\\toprule\endhead

2.954E-08&3.27E-08&1.66E-09&3.10E-08&5.1E-02&2.6E-02\\

4.970E-08&5.35E-08&1.65E-09&5.19E-08&4.3E-02&2.4E-02\\

8.908E-08&9.53E-08&1.63E-09&9.37E-08&5.2E-02&2.4E-02\\

2.991E-07&3.17E-07&1.68E-09&3.15E-07&5.4E-02&2.4E-02\\

4.805E-07&5.29E-07&1.80E-09&5.27E-07&9.7E-02&2.4E-02\\

4.810E-07&5.29E-07&2.00E-09&5.27E-07&9.6E-02&2.4E-02\\

5.024E-07&5.30E-07&1.80E-09&5.28E-07&5.1E-02&2.4E-02\\

8.916E-07&9.37E-07&1.52E-09&9.35E-07&4.9E-02&2.2E-02\\

2.943E-06&3.07E-06&1.77E-09&3.07E-06&4.3E-02&2.2E-02\\

4.922E-06&5.13E-06&2.02E-09&5.13E-06&4.2E-02&2.2E-02\\

8.827E-06&9.25E-06&3.20E-09&9.24E-06&4.7E-02&2.2E-02\\

2.957E-05&3.05E-05&4.10E-09&3.05E-05&3.1E-02&2.2E-02\\

4.892E-05&5.01E-05&6.70E-09&5.01E-05&2.4E-02&2.2E-02\\

8.768E-05&8.87E-05&7.70E-09&8.87E-05&1.1E-02&2.2E-02\\

8.960E-05&8.88E-05&1.20E-08&8.88E-05&-9.1E-03&2.2E-02\\

8.768E-05&8.88E-05&1.00E-08&8.88E-05&1.3E-02&2.2E-02\\

}

\missingEntries{ 16 }

\object{ Stabil Ion Gauge }

\manufacturer{ Granville-Phillips }

\type{ EXT-Y | Stabil Ion Controler 370B }

\serialNo{ YEA06800 | 1449 }

\applicant{  { BOC EDWARDS }  { Marshall Road }  { EASTBOURNE, EAST SUSSEX }  { BN22 9BA } }

\refNo{ ? }

\calibMark{ QS 21/13  }

\referenceMark{ 7.5-4003 }

\calibDate{ 2013-11-26 }

\examiner{ Th.\,Bock }

\certificateDate{ 2013-12-18 }

\begin{document}



\printFirstPage

   \section{ Description of the calibration device }

       The device was shipped under atmospheric pressure kept in the producers plastic shell.

       A memory module belonging to the stabil ion gauge (serial 06800) was provided. It was active during calibration.

     \section{ Calibration procedure }

       The device was installed in a vertical orientation. Before calibration the gauge head was baked at \(?\) °C for \(?\) h. During the cool down phase the head was degassed for \(?\) minutes. At room temperature it was exposed for \(?\) h at \(?⋅10^{?}\) mbar argon for sputtering the ion collector.

       The sensitivity factor was kept at an value of  \(?\) mbar\(^{-1}\) during the calibration. The calibration was carried out with the following device settings:

       \begin{itemize}\item display: mbar\item filament: F1\item emission: L\item channel: A\end{itemize}

       Before each calibration point the residual pressure indication \(p_r\)  was checked.

       The temperature \(θ\)  during the calibration was \(?\) °C and varied from this value within \(\pm?\) °C.

       The device was calibrated with ? in the pressure range \(?⋅ 10^{?}\) mbar to \(?⋅10^{?}\) mbar by comparing its reading with the calibration pressure that was established by the primary standard CE3 of PTB applying the continuous expansion method.

     \section{ Relative error of indication }

       The correction factor \(CF\) given in the table below was calculated from the indicated pressure \(p_{ind}\) as follows:\[CF =\frac{p_{cal}}{p_{ind} - p_{r}}\] where \(p_{cal}\) denotes the calibration pressure as generated in the primary standard and \(p_{r}\) the reading at residual pressure. From this, the corrected pressure \(p\) can be calculated from the residual pressure indication and the indicated pressure by:\[p = CF (p_{ind} - p_{r})\]

       The uncertainty \(U\) of \(CF\) at the time of calibration is given in the last column of the table below. It includes the repeatability of \(p_{ind}\) for otherwise identical conditions (\(p_{cal}\), \(θ\)).\printResultTable

     \section{ Uncertainty of Calibration }

       The uncertainty \(U\) stated is the expanded measurement uncertainty obtained by multiplying the standard measurement uncertainty by the coverage factor \(k = 2\). It has been determined in accordance with the  “Guide to the Expression of Uncertainty in Measurement (GUM)”. The value of the measurand then normally lies, with a probability of approximately \(95\) \%. within the attributed coverage interval.\par \(95\)\,\%  95\,\% 95~\% \(95\) \%  \par

       95 \% 95 \%

   \printLastPage

\end{document}

%---------------------------





\(95\)\,\%  95\,\% 95~\%

kalibrierschein/test-ks-KK-2015.tex

deleted100644 → 0
+0 −74
Original line number Diff line number Diff line 


%---------------------------

\listfiles

\documentclass[en,KK,2015]{kalibrierschein}

\resultTable{ 6 }{%

{\(p_{cal}\)}&{\(p_{ind}\)}&{\(p_r\)}&{\(p_{ind} - p_r\)}&{\(e\)}&{\(U(k=2)\)}\\

mbar&mbar&mbar&mbar&&\\\toprule\endhead

2.954E-08&3.27E-08&1.66E-09&3.10E-08&5.1E-02&2.6E-02\\

4.970E-08&5.35E-08&1.65E-09&5.19E-08&4.3E-02&2.4E-02\\

8.908E-08&9.53E-08&1.63E-09&9.37E-08&5.2E-02&2.4E-02\\

2.991E-07&3.17E-07&1.68E-09&3.15E-07&5.4E-02&2.4E-02\\

4.805E-07&5.29E-07&1.80E-09&5.27E-07&9.7E-02&2.4E-02\\

4.810E-07&5.29E-07&2.00E-09&5.27E-07&9.6E-02&2.4E-02\\

5.024E-07&5.30E-07&1.80E-09&5.28E-07&5.1E-02&2.4E-02\\

8.916E-07&9.37E-07&1.52E-09&9.35E-07&4.9E-02&2.2E-02\\

2.943E-06&3.07E-06&1.77E-09&3.07E-06&4.3E-02&2.2E-02\\

4.922E-06&5.13E-06&2.02E-09&5.13E-06&4.2E-02&2.2E-02\\

8.827E-06&9.25E-06&3.20E-09&9.24E-06&4.7E-02&2.2E-02\\

2.957E-05&3.05E-05&4.10E-09&3.05E-05&3.1E-02&2.2E-02\\

4.892E-05&5.01E-05&6.70E-09&5.01E-05&2.4E-02&2.2E-02\\

8.768E-05&8.87E-05&7.70E-09&8.87E-05&1.1E-02&2.2E-02\\

8.960E-05&8.88E-05&1.20E-08&8.88E-05&-9.1E-03&2.2E-02\\

8.768E-05&8.88E-05&1.00E-08&8.88E-05&1.3E-02&2.2E-02\\

}

\missingEntries{ 16 }

\object{ Stabil Ion Gauge }

\manufacturer{ Granville-Phillips }

\type{ EXT-Y, Stabil Ion Controler 370B }

\serialNo{ YEA06800, # & _ ^ 1449 } 

\applicant{ 

  { Customer.Name } 

  { Customer.Address.Street } 

  { Customer.Address.Zipcode Customer.Address.Town }

  { Customer.Address.District } 

}



\refNo{ ? }

\calibMark{ 75120 PTB 13 }

\calibDate{ 2013-11-26 }

\byOrder{ Dr. K. Jousten }

\examiner{ ? }

\certificateDate{ 2013-12-18 }

\begin{document}



\printFirstPage

   \section{ Description of the calibration device }



   \IfLanguageName{ngerman}{DEUTSCH}{ENGLISH}



   %\num{9.99E-7 +- 9E-9} \par \bigskip

   \num{9.99 +- 0.09} \par \bigskip



       The device was shipped under atmospheric pressure kept in the producers plastic shell.

       A memory module belonging to the stabil ion gauge (serial 06800) was provided. It was active during calibration.

     \section{ Calibration procedure }

       The device was installed in a vertical orientation. Before calibration the gauge head was baked at \(?\) °C for \(?\) h. During the cool down phase the head was degassed for \(?\) minutes. At room temperature it was exposed for \(?\) h at \(?⋅10^{?}\) mbar argon for sputtering the ion collector.

       The sensitivity factor was kept at an value of  \(?\) mbar\(^{-1}\) during the calibration. The calibration was carried out with the following device settings:

       \begin{itemize}\item display: mbar\item filament: F1\item emission: L\item channel: A\end{itemize}

       Before each calibration point the residual pressure indication \(p_r\)  was checked.

       The temperature \(θ\)  during the calibration was \(?\) °C and varied from this value within \(\pm?\) °C.

       The device was calibrated with ? in the pressure range \(?⋅ 10^{?}\) mbar to \(?⋅10^{?}\) mbar by comparing its reading with the calibration pressure that was established by the primary standard CE3 of PTB applying the continuous expansion method.

     \section{ Relative error of indication }

       The correction factor \(CF\) given in the table below was calculated from the indicated pressure \(p_{ind}\) as follows:\[CF =\frac{p_{cal}}{p_{ind} - p_{r}}\] where \(p_{cal}\) denotes the calibration pressure as generated in the primary standard and \(p_{r}\) the reading at residual pressure. From this, the corrected pressure \(p\) can be calculated from the residual pressure indication and the indicated pressure by:\[p = CF (p_{ind} - p_{r})\]

       The uncertainty \(U\) of \(CF\) at the time of calibration is given in the last column of the table below. It includes the repeatability of \(p_{ind}\) for otherwise identical conditions (\(p_{cal}\), \(θ\)).\printResultTable

     \section{ Uncertainty of Calibration }

       The uncertainty \(U\) stated is the expanded measurement uncertainty obtained by multiplying the standard measurement uncertainty by the coverage factor \(k = 2\). It has been determined in accordance with the  “Guide to the Expression of Uncertainty in Measurement (GUM)”. The value of the measurand then normally lies, with a probability of approximately \(95\) \%. within the attributed coverage interval.\par \(95\)\,\%  95\,\% 95~\% \(95\) \%  \par

       95 \% 95 \%

   \printLastPage

\end{document}

%---------------------------





\(95\)\,\%  95\,\% 95~\%

kalibrierschein/test-ks-KK-2019.tex

deleted100644 → 0
+0 −90
Original line number Diff line number Diff line 


%---------------------------

\documentclass[en,KK,BLN]{kalibrierschein}

\resultTable[Gas:~N$_2$]{ 6 }{%

{\(p_{cal}\)}&{\(p_{ind}\)}&{\(p_r\)}&{\(p_{ind} - p_r\)}&{\(e\)}&{\(U(k=2)\)}\\

mbar&mbar&mbar&mbar&&\\\toprule\endhead

2.954E-08&3.27E-08&1.66E-09&3.10E-08&5.1E-02&2.6E-02\\

4.970E-08&5.35E-08&1.65E-09&5.19E-08&4.3E-02&2.4E-02\\

8.908E-08&9.53E-08&1.63E-09&9.37E-08&5.2E-02&2.4E-02\\

2.991E-07&3.17E-07&1.68E-09&3.15E-07&5.4E-02&2.4E-02\\

4.805E-07&5.29E-07&1.80E-09&5.27E-07&9.7E-02&2.4E-02\\

4.810E-07&5.29E-07&2.00E-09&5.27E-07&9.6E-02&2.4E-02\\

5.024E-07&5.30E-07&1.80E-09&5.28E-07&5.1E-02&2.4E-02\\

8.916E-07&9.37E-07&1.52E-09&9.35E-07&4.9E-02&2.2E-02\\

2.943E-06&3.07E-06&1.77E-09&3.07E-06&4.3E-02&2.2E-02\\

4.922E-06&5.13E-06&2.02E-09&5.13E-06&4.2E-02&2.2E-02\\

8.827E-06&9.25E-06&3.20E-09&9.24E-06&4.7E-02&2.2E-02\\

2.957E-05&3.05E-05&4.10E-09&3.05E-05&3.1E-02&2.2E-02\\

4.892E-05&5.01E-05&6.70E-09&5.01E-05&2.4E-02&2.2E-02\\

8.768E-05&8.87E-05&7.70E-09&8.87E-05&1.1E-02&2.2E-02\\

8.960E-05&8.88E-05&1.20E-08&8.88E-05&-9.1E-03&2.2E-02\\

8.768E-05&8.88E-05&1.00E-08&8.88E-05&1.3E-02&2.2E-02\\\bottomrule

}



\resultTable{ 6 }{%

{\(p_{cal}\)}&{\(p_{ind}\)}&{\(p_r\)}&{\(p_{ind} - p_r\)}&{\(e\)}&{\(U(k=2)\)}\\

mbar&mbar&mbar&mbar&&\\\toprule\endhead

2.954E-08&3.27E-08&1.66E-09&3.10E-08&5.1E-02&2.6E-02\\

4.970E-08&5.35E-08&1.65E-09&5.19E-08&4.3E-02&2.4E-02\\

8.908E-08&9.53E-08&1.63E-09&9.37E-08&5.2E-02&2.4E-02\\

2.991E-07&3.17E-07&1.68E-09&3.15E-07&5.4E-02&2.4E-02\\

4.805E-07&5.29E-07&1.80E-09&5.27E-07&9.7E-02&2.4E-02\\

4.810E-07&5.29E-07&2.00E-09&5.27E-07&9.6E-02&2.4E-02\\

5.024E-07&5.30E-07&1.80E-09&5.28E-07&5.1E-02&2.4E-02\\

8.916E-07&9.37E-07&1.52E-09&9.35E-07&4.9E-02&2.2E-02\\

2.943E-06&3.07E-06&1.77E-09&3.07E-06&4.3E-02&2.2E-02\\

4.922E-06&5.13E-06&2.02E-09&5.13E-06&4.2E-02&2.2E-02\\

8.827E-06&9.25E-06&3.20E-09&9.24E-06&4.7E-02&2.2E-02\\

2.957E-05&3.05E-05&4.10E-09&3.05E-05&3.1E-02&2.2E-02\\

4.892E-05&5.01E-05&6.70E-09&5.01E-05&2.4E-02&2.2E-02\\

8.768E-05&8.87E-05&7.70E-09&8.87E-05&1.1E-02&2.2E-02\\

8.960E-05&8.88E-05&1.20E-08&8.88E-05&-9.1E-03&2.2E-02\\

8.768E-05&8.88E-05&1.00E-08&8.88E-05&1.3E-02&2.2E-02\\

}



%%%\missingEntries{ 16 }

\object{ Stabil Ion Gauge }

\manufacturer{ Granville-Phillips }

\type{ EXT-Y, Stabil Ion Controler 370B }

% Anzahl Kommas bei \type gibt die Spaltenzahl vor. 

% \manufacturer und \serialNo sollten dieselbe Anzahl Kommas haben.

\serialNo{ YEA06800, 1449 }

\applicant{  { BOC EDWARDS }  { Marshall Road }  { EASTBOURNE, EAST SUSSEX }  

{ BN22 9BA } }

\refNo{ ? }

\calibMark{ 75120 PTB 13 }

\calibDate{ 2013-11-26 }

\byOrder{ Dr. K. Jousten }

\examiner{ ? }

\certificateDate{ 2013-12-18 }

\begin{document}



\printFirstPage

   \section{ Description of the calibration device }



   %\num{9.99E-7 +- 9E-9} \par \bigskip

   \num{9.99 +- 0.09} \par \bigskip



       The device was shipped under atmospheric pressure kept in the producers plastic shell.

       A memory module belonging to the stabil ion gauge (serial 06800) was provided. It was active during calibration.

     \section{ Calibration procedure }

       The device was installed in a vertical orientation. Before calibration the gauge head was baked at \(?\) °C for \(?\) h. During the cool down phase the head was degassed for \(?\) minutes. At room temperature it was exposed for \(?\) h at \(?⋅10^{?}\) mbar argon for sputtering the ion collector.

       The sensitivity factor was kept at an value of  \(?\) mbar\(^{-1}\) during the calibration. The calibration was carried out with the following device settings:

       \begin{itemize}\item display: mbar\item filament: F1\item emission: L\item channel: A\end{itemize}

       Before each calibration point the residual pressure indication \(p_r\)  was checked.

       The temperature \(θ\)  during the calibration was \(?\) °C and varied from this value within \(\pm?\) °C.

       The device was calibrated with ? in the pressure range \(?⋅ 10^{?}\) mbar to \(?⋅10^{?}\) mbar by comparing its reading with the calibration pressure that was established by the primary standard CE3 of PTB applying the continuous expansion method.

     \section{ Relative error of indication }

       The correction factor \(CF\) given in the table below was calculated from the indicated pressure \(p_{ind}\) as follows:\[CF =\frac{p_{cal}}{p_{ind} - p_{r}}\] where \(p_{cal}\) denotes the calibration pressure as generated in the primary standard and \(p_{r}\) the reading at residual pressure. From this, the corrected pressure \(p\) can be calculated from the residual pressure indication and the indicated pressure by:\[p = CF (p_{ind} - p_{r})\]

       The uncertainty \(U\) of \(CF\) at the time of calibration is given in the last column of the table below. It includes the repeatability of \(p_{ind}\) for otherwise identical conditions (\(p_{cal}\), \(θ\)).\printResultTable

     \section{ Uncertainty of Calibration }

       The uncertainty \(U\) stated is the expanded measurement uncertainty obtained by multiplying the standard measurement uncertainty by the coverage factor \(k = 2\). It has been determined in accordance with the  “Guide to the Expression of Uncertainty in Measurement (GUM)”. The value of the measurand then normally lies, with a probability of approximately \(95\) \%. within the attributed coverage interval.\par \(95\)\,\%  95\,\% 95~\% \(95\) \%  \par

       95 \% 95 \%

   \printLastPage

\end{document}

%---------------------------





\(95\)\,\%  95\,\% 95~\%

kalibrierschein/test-ks-KK.tex

deleted100644 → 0
+0 −90
Original line number Diff line number Diff line 


%---------------------------

\listfiles

\documentclass[ngerman,KK]{kalibrierschein}

\resultTable[Gas:~N$_2$]{ 6 }{%

{\(p_{cal}\)}&{\(p_{ind}\)}&{\(p_r\)}&{\(p_{ind} - p_r\)}&{\(e\)}&{\(U(k=2)\)}\\

mbar&mbar&mbar&mbar&&\\\toprule\endhead

2.954E-08&3.27E-08&1.66E-09&3.10E-08&5.1E-02&2.6E-02\\

4.970E-08&5.35E-08&1.65E-09&5.19E-08&4.3E-02&2.4E-02\\

8.908E-08&9.53E-08&1.63E-09&9.37E-08&5.2E-02&2.4E-02\\

2.991E-07&3.17E-07&1.68E-09&3.15E-07&5.4E-02&2.4E-02\\

4.805E-07&5.29E-07&1.80E-09&5.27E-07&9.7E-02&2.4E-02\\

4.810E-07&5.29E-07&2.00E-09&5.27E-07&9.6E-02&2.4E-02\\

5.024E-07&5.30E-07&1.80E-09&5.28E-07&5.1E-02&2.4E-02\\

8.916E-07&9.37E-07&1.52E-09&9.35E-07&4.9E-02&2.2E-02\\

2.943E-06&3.07E-06&1.77E-09&3.07E-06&4.3E-02&2.2E-02\\

4.922E-06&5.13E-06&2.02E-09&5.13E-06&4.2E-02&2.2E-02\\

8.827E-06&9.25E-06&3.20E-09&9.24E-06&4.7E-02&2.2E-02\\

2.957E-05&3.05E-05&4.10E-09&3.05E-05&3.1E-02&2.2E-02\\

4.892E-05&5.01E-05&6.70E-09&5.01E-05&2.4E-02&2.2E-02\\

8.768E-05&8.87E-05&7.70E-09&8.87E-05&1.1E-02&2.2E-02\\

8.960E-05&8.88E-05&1.20E-08&8.88E-05&-9.1E-03&2.2E-02\\

8.768E-05&8.88E-05&1.00E-08&8.88E-05&1.3E-02&2.2E-02\\\bottomrule

}



\resultTable{ 6 }{%

{\(p_{cal}\)}&{\(p_{ind}\)}&{\(p_r\)}&{\(p_{ind} - p_r\)}&{\(e\)}&{\(U(k=2)\)}\\

mbar&mbar&mbar&mbar&&\\\toprule\endhead

2.954E-08&3.27E-08&1.66E-09&3.10E-08&5.1E-02&2.6E-02\\

4.970E-08&5.35E-08&1.65E-09&5.19E-08&4.3E-02&2.4E-02\\

8.908E-08&9.53E-08&1.63E-09&9.37E-08&5.2E-02&2.4E-02\\

2.991E-07&3.17E-07&1.68E-09&3.15E-07&5.4E-02&2.4E-02\\

4.805E-07&5.29E-07&1.80E-09&5.27E-07&9.7E-02&2.4E-02\\

4.810E-07&5.29E-07&2.00E-09&5.27E-07&9.6E-02&2.4E-02\\

5.024E-07&5.30E-07&1.80E-09&5.28E-07&5.1E-02&2.4E-02\\

8.916E-07&9.37E-07&1.52E-09&9.35E-07&4.9E-02&2.2E-02\\

2.943E-06&3.07E-06&1.77E-09&3.07E-06&4.3E-02&2.2E-02\\

4.922E-06&5.13E-06&2.02E-09&5.13E-06&4.2E-02&2.2E-02\\

8.827E-06&9.25E-06&3.20E-09&9.24E-06&4.7E-02&2.2E-02\\

2.957E-05&3.05E-05&4.10E-09&3.05E-05&3.1E-02&2.2E-02\\

4.892E-05&5.01E-05&6.70E-09&5.01E-05&2.4E-02&2.2E-02\\

8.768E-05&8.87E-05&7.70E-09&8.87E-05&1.1E-02&2.2E-02\\

8.960E-05&8.88E-05&1.20E-08&8.88E-05&-9.1E-03&2.2E-02\\

8.768E-05&8.88E-05&1.00E-08&8.88E-05&1.3E-02&2.2E-02\\

}



\missingEntries{ 16 }

\object{ Stabil Ion Gauge }

\manufacturer{ Granville-Phillips }

\type{ EXT-Y, Stabil Ion Controler 370B }

% Anzahl Kommas bei \type gibt die Spaltenzahl vor. 

% \manufacturer und \serialNo sollten dieselbe Anzahl Kommas haben.

\serialNo{ YEA06800, 1449 }

\applicant{  { BOC EDWARDS }  { Marshall Road }  { EASTBOURNE, EAST SUSSEX }  { BN22 9BA } }

\refNo{ ? }

\calibMark{ 75120 PTB 13 }

\calibDate{ 2013-11-26 }

\byOrder{ Dr. K. Jousten }

\examiner{ ? }

\certificateDate{ 2013-12-18 }

\begin{document}



\printFirstPage

   \section{ Description of the calibration device }



   %\num{9.99E-7 +- 9E-9} \par \bigskip

   \num{9.99 +- 0.09} \par \bigskip



       The device was shipped under atmospheric pressure kept in the producers plastic shell.

       A memory module belonging to the stabil ion gauge (serial 06800) was provided. It was active during calibration.

     \section{ Calibration procedure }

       The device was installed in a vertical orientation. Before calibration the gauge head was baked at \(?\) °C for \(?\) h. During the cool down phase the head was degassed for \(?\) minutes. At room temperature it was exposed for \(?\) h at \(?⋅10^{?}\) mbar argon for sputtering the ion collector.

       The sensitivity factor was kept at an value of  \(?\) mbar\(^{-1}\) during the calibration. The calibration was carried out with the following device settings:

       \begin{itemize}\item display: mbar\item filament: F1\item emission: L\item channel: A\end{itemize}

       Before each calibration point the residual pressure indication \(p_r\)  was checked.

       The temperature \(θ\)  during the calibration was \(?\) °C and varied from this value within \(\pm?\) °C.

       The device was calibrated with ? in the pressure range \(?⋅ 10^{?}\) mbar to \(?⋅10^{?}\) mbar by comparing its reading with the calibration pressure that was established by the primary standard CE3 of PTB applying the continuous expansion method.

     \section{ Relative error of indication }

       The correction factor \(CF\) given in the table below was calculated from the indicated pressure \(p_{ind}\) as follows:\[CF =\frac{p_{cal}}{p_{ind} - p_{r}}\] where \(p_{cal}\) denotes the calibration pressure as generated in the primary standard and \(p_{r}\) the reading at residual pressure. From this, the corrected pressure \(p\) can be calculated from the residual pressure indication and the indicated pressure by:\[p = CF (p_{ind} - p_{r})\]

       The uncertainty \(U\) of \(CF\) at the time of calibration is given in the last column of the table below. It includes the repeatability of \(p_{ind}\) for otherwise identical conditions (\(p_{cal}\), \(θ\)).\printResultTable

     \section{ Uncertainty of Calibration }

       The uncertainty \(U\) stated is the expanded measurement uncertainty obtained by multiplying the standard measurement uncertainty by the coverage factor \(k = 2\). It has been determined in accordance with the  “Guide to the Expression of Uncertainty in Measurement (GUM)”. The value of the measurand then normally lies, with a probability of approximately \(95\) \%. within the attributed coverage interval.\par \(95\)\,\%  95\,\% 95~\% \(95\) \%  \par

       95 \% 95 \%

   \printLastPage

\end{document}

%---------------------------





\(95\)\,\%  95\,\% 95~\%

ptbletter/ptbletter-doc.tex

+3 −2
Original line number Diff line number Diff line
@@ -2,7 +2,7 @@ 
\documentclass[%

,ngerman

,twoside

,serif

%,serif

,sanserif

,BLN

%,BS
@@ -72,13 +72,14 @@ Klassenoptionen: 
"`A4"' festgelegt. Als Eingabe-Kodierung wird ausschließlich "`UTF-8"'

unterstützt.



Das Text, der dem Makro \verb|\bgText| übergeben wird, erscheint auf jeder 

Der Text, der dem Makro \verb|\bgText| übergeben wird, erscheint auf jeder 

Seite auf dem Textbereich als hellgrauer Hintergrunddruck schräg in großer 

Schrift. Wird die Sternvariante (\verb|\bgText*|) benutzt, erscheint der 

Hintergrunddruck nur auf der ersten Seite. Die Farbe dieses Textes kann durch Definition der Farbe »bgTextColor« geschehen, z.\,B.\ so: 

\verb|\definecolor{bgTextColor}{gray}{0.9}|



%\closing{\MHG}

%\closing{\MFg}

\closing{\MFG}



\ps PS: Viel Spaß beim \TeX{}en!

ptbletter/ptbletter.cls

+34 −28
Original line number Diff line number Diff line 
% Rolf Niepraschk, Rolf.Niepraschk@ptb.de

% Rolf Niepraschk, Rolf.Niepraschk@gmx.de



\setcounter{errorcontextlines}{100}  \listfiles



\NeedsTeXFormat{LaTeX2e}[1999/12/01]

\ProvidesClass{ptbletter}[2019/04/02 v0.3e PTB-Brief-Klasse (RN)]

\ProvidesClass{ptbletter}[2023/04/21 v0.4c PTB-Brief-Klasse (RN)]



\let\ptb@tempdima=\@ovxx

\let\ptb@tempdimb=\@ovyy
@@ -56,7 +56,7 @@ 
  }

}



\DeclareOption*{\PassOptionsToClass{\CurrentOption}{scrlttr2}}

%\DeclareOption*{\PassOptionsToClass{\CurrentOption}{scrlttr2}}



\ExecuteOptions{pagesize}

\ProcessOptions\relax
@@ -65,7 +65,7 @@ 


\LoadClass[%

,fontsize=11pt

,DINmtext

%,DINmtext

,backaddress=plain

,refline=nodate

,enlargefirstpage
@@ -74,6 +74,8 @@ 
,firstfoot=true

]{scrlttr2}



\LoadLetterOption{DINmtext}



\RequirePackage[%

,verbose

,left=1in
@@ -113,16 +115,15 @@ 
\RequirePackage[\ptb@lang]{babel}

\RequirePackage{etoolbox,iflang,trimspaces}

\AtEndPreamble{%

  \IfLanguageName{ngerman}{

    \AtEndOfClass{\shorthandon{"}}

  \IfLanguageName{ngerman}{%

    \RequirePackage[autostyle=true,german=guillemets,maxlevel=3]{csquotes}%

  }{%

    \RequirePackage[babel=once]{csquotes}

    \useshorthands*{"}

  }

  }%

  \MakeAutoQuote{»}{«}

  \defineshorthand{"`}{\openautoquote}

  \defineshorthand{"'}{\closeautoquote}

  \defineshorthand{"'}{\closeautoquote}\shorthandon{"}

}



\AtEndOfClass{%
@@ -132,36 +133,40 @@ 
  }%

}



%%%\AtEndOfClass{\shorthandon{"}}

\setplength{toaddrhpos}{72bp}

\setplength{toaddrvpos}{124bp}



\@setplength{toaddrhpos}{72bp}

\@setplength{toaddrvpos}{124bp}

\setplength{lochpos}{-354bp}% "-" --> vom linken Blattand aus

\setplength{locvpos}{146bp}%      --> vom oberen Blattand aus

\setplength{locwidth}{212bp}

\setplength{locheight}{139bp}



\@setplength{lochpos}{-354bp}% "-" --> vom linken Blattand aus

\@setplength{locvpos}{146bp}%      --> vom oberen Blattand aus

\@setplength{locwidth}{212bp}

\@setplength{locheight}{139bp}

\setplength{refvpos}{304bp}

%\setplength{refwidth}{40mm}

\setplength{refaftervskip}{\z@}



\@setplength{refvpos}{304bp}

%\@setplength{refwidth}{40mm}

\@setplength{refaftervskip}{\z@}

\setplength{firstheadhpos}{72bp}

\setplength{firstheadvpos}{50bp}

\setplength{firstheadwidth}{469bp}



\@setplength{firstheadhpos}{72bp}

\@setplength{firstheadvpos}{50bp}

\@setplength{firstheadwidth}{469bp}

\setplength{firstfoothpos}{72bp}

\setplength{firstfootvpos}{764bp}

\setplength{firstfootwidth}{\useplength{firstheadwidth}}



\@setplength{firstfoothpos}{72bp}

\@setplength{firstfootvpos}{764bp}

\@setplength{firstfootwidth}{\useplength{firstheadwidth}}

\setplength{subjectaftervskip}{23bp}



\@setplength{subjectaftervskip}{23bp}

%\setplength{sigindent}{3em}

\setplength{sigbeforevskip}{3mm}%



\@setplength{sigindent}{3em}

\@setplength{sigbeforevskip}{-17.2mm}% ???

\setlength{\textheight}{235mm}

\setlength{\footskip}{1\baselineskip}

\setlength{\footskip}{2mm}

\setlength{\footheight}{30bp}



%\widowpenalties 2 10000 0 %

\usepackage[defaultlines=2]{nowidow}

\setnowidow% keine einzelne Zeile am Seitenbeginn (keine "Hurenkinder")

% https://tex.stackexchange.com/questions/21983/how-to-avoid-page-breaks-inside-paragraphs



\let\raggedsignature=\raggedright



\removereffields
@@ -366,6 +371,7 @@ 
    ,babel=true

    ]{microtype}

  \fi

  \shorthandon{"}%

}

\RequirePackage{enumitem}

\setlist{leftmargin=*,nosep,topsep=.5em,itemsep=.25em}

ptbposter/Makefile

+6 −5
Original line number Diff line number Diff line 


# Rolf Niepraschk, 2017/10/18, Rolf.Niepraschk@ptb.de

# Rolf Niepraschk, 2019/05/13, Rolf.Niepraschk@ptb.de



.SUFFIXES : .tex .ltx .dvi .ps .pdf .eps
@@ -8,15 +8,16 @@ DOC2 = ptbposter-doc-2 


ARCHNAME = ptbposter-$(shell date +%Y-%m-%d).zip



ADDINPUTS = ptbposter.cls ptbposter-logo-A.mps 

all : $(DOC1).pdf $(DOC2).pdf tcb-example1.pdf tcb-example2.pdf 



all : $(DOC1).pdf $(DOC2).pdf



$(DOC1).pdf $(DOC2).pdf : $(ADDINPUTS)

$(DOC1).pdf $(DOC2).pdf tcb-example2.pdf : $(ADDINPUTS)



%.pdf : %.tex

	pdflatex $<



tcb-example1.pdf : tcb-example1.tex

	lualatex $<



#%.mps : %.eps

#	purifyeps $< - | sed -e "s/0 0 0 setrgbcolor/%/g" > $@

# "purifyeps" macht aktuell Probleme # 2017-10-18

ptbposter/README.md

+7 −3
Original line number Diff line number Diff line 
## ptbposter



Das Projekt enthält eine LaTeX-Dokumentenklasse und andere Komponenten zur

LaTeX-Dokumentenklasse und andere Komponenten zur

Erzeugung eines PTB-konformen Posters. Näheres siehe Dokumentation [Teil

1](ptbposter-doc-1.pdf) und [Teil 2](ptbposter-doc-2.pdf).

1](ptbposter-doc-1.pdf) und [Teil 2](ptbposter-doc-2.pdf) sowie die

Beispiele, die die Verwendung positionierbarer Boxen

[(tcolobox)](https://www.ctan.org/pkg/tcolorbox) sowie die Einbeziehung des

Grafikpakets [TikZ](https://www.ctan.org/pkg/pgf) zeigen:

[tcb-example1](tcb-example1.pdf) und [tcb-example2](tcb-example2.pdf).



Rolf Niepraschk, 2015-05-26

Rolf Niepraschk, 2025-03-13

ptbposter/ptbposter-2018.clo

0 → 100644
+170 −0
Original line number Diff line number Diff line 
% Rolf Niepraschk, Rolf.Niepraschk@ptb.de



\ProvidesFile{ptbposter-2018.clo}%

  [2022/09/20 1.0.0 PTB-Poster layout 2018 (RN)]

  

\typeout{*** LAYOUT 2018 ***}



\setlength\PTB@default@fontsize@base{0.0130170299199\PTB@scale@base}% 11pt (A4), 44pt (A0)

\setlength\PTB@default@author@fontsize{0.0157550946737\PTB@scale@base}%   53.3pt (A0)

\setlength\PTB@default@title@fontsize@base{0.0315101893474\PTB@scale@base}%  106.6pt (A0)

\setlength\PTB@default@foot@fontsize{0.00567538119577\PTB@scale@base}%  19.2pt (A0)



\iftutex% LuaTeX oder XeTeX

  \setfontfamily\PTBdesignFont{texgyreheros}[

    Ligatures=TeX,

    Extension=.otf,

    UprightFont=*-regular,

    BoldFont=*-bold,

    ItalicFont=*-italic,

    BoldItalicFont=*-bolditalic]

  \let\sffamily=\PTBdesignFont

\else

  \let\PTBdesignFont=\sffamily

\fi



\AtEndPreamble{%

  \ifx\@author\@empty

    \setlength\PTB@topmargin{0.152\PTB@scale@base}%

  \else

    \setlength\PTB@topmargin{0.180824222418\PTB@scale@base}%

  \fi

  \ifPTBlandscape

    \setlength\PTB@framewidth{0.950378471315\PTB@scale@base}%  3215pt (1130mm) (A0) 

    \ifx\@author\@empty

      \setlength\PTB@frameheight{0.490824222418\PTB@scale@base}% 1660pt  (584mm) (A0)

    \else

      \setlength\PTB@frameheight{0.462\PTB@scale@base}% 1563pt  (549mm) (A0) 

    \fi

  \else

    \setlength\PTB@framewidth{0.656013458076\PTB@scale@base}%  2219pt  (780mm) (A0)

    \ifx\@author\@empty

      \setlength\PTB@frameheight{0.769\PTB@scale@base}% 2602pt  (914mm) (A0)

    \else

      \setlength\PTB@frameheight{0.740117747573\PTB@scale@base}% 2504pt  (880mm) (A0)

    \fi

  \fi

}



\PTB@AddToShipoutPictureBG{% relativ zur oberen linken Ecke des Blattes

  \PTB@tempdima=-0.077\PTB@scale@base

  \put(\PTB@leftmargin,\PTB@tempdima){%

    \parbox[b]{\PTB@framewidth}{% TODO: vereinfachen?

      \parbox[b]{.401\PTB@scale@base}{%

        \textcolor{PTBcolor}{% TODO: Tikz-Grafik erzeugen (autom.?) und verwenden

          \includegraphics[height=.055\PTB@scale@base]{PTB-logo-A.mps}

        }%    1,58365758755

        \ifPTB@logo@long@

        \hfill

        \raisebox{.0025\PTB@scale@base}{% 

          %\includegraphics[width=.612\linewidth]{ptbposter-logo-B.mps}%

          \resizebox{.61\linewidth}{!}{%

            \hspace{-.2ex}% 

            \begin{varwidth}[b]{\linewidth}%

              \PTBdesignFont\bfseries

              Physikalisch-Technische Bundesanstalt\\

              Braunschweig und Berlin\\

              \mdseries

              Nationales Metrologieinstitut

            \end{varwidth}%

          }%

        }%

        \fi

      }%

      \hfill

      \ifx\PTB@logo\@empty\else

        \includegraphics[height=.055\PTB@scale@base]{\PTB@logo}%

      \fi

    }

  }%

  \def\PTB@tempa{\parbox[c]{\PTB@framewidth}{% Komplette Titeldefinition

    \PTB@title@justification\PTB@title@series\PTBdesignFont\titleFontSize

    \microtypesetup{protrusion=false}\@title}}%

  \begingroup

  \@tempcnta=\@ne \@tempcntb=10499 %

  \loop\ifnum\@tempcnta<25 % Finden der ersten passenden titleFontSize

    \multiply\@tempcntb 10000 \divide\@tempcntb by 10500 % jeweils um 5% kleiner

    \PTB@scaleTitleFontSize{0.\the\@tempcntb}% 1:0.9999, 2:0.9522, 3:0.9068, ...

    %\typeout{\the\@tempcnta\space XXX: \titleFontSize, 0.\the\@tempcntb}%

    \setbox\z@ \hbox{\PTB@tempa}%

    \ifdim\dimexpr\ht\z@+\dp\z@>\PTB@maxtitleheight

      \advance\@tempcnta\@ne % weiter, wenn zu gross

    \else

      \@tempcnta=999 % Abbruch

    \fi

  \repeat

  \endgroup

  \PTB@tempdima=-0.127\PTB@scale@base

  \put(\PTB@leftmargin,\PTB@tempdima){\PTB@tempa}% Title

  \PTB@tempdima=-0.172\PTB@scale@base

  \def\and{, }%

  \put(\PTB@leftmargin,\PTB@tempdima){\parbox[b]{\PTB@framewidth}{% Autoren

    \PTB@authors@justification\PTBdesignFont\authorFontSize\@author}}%

  % hier wird \@thanks gefüllt

  \linethickness{\PTB@framethickness}\color{PTBcolor}%

  \PTB@tempdima=-0.0883095039717\PTB@scale@base

  \put(\PTB@leftmargin,\PTB@tempdima){%

    \line(1,0){\dimexpr\paperwidth-2\PTB@leftmargin}}%

  % blauer Rahmen

  \put(\PTB@leftmargin,\dimexpr-\textheight-2\PTB@textvsep-\PTB@topmargin)%

    {\framebox(\dimexpr\textwidth+2\PTB@texthsep,%

     \dimexpr\textheight+2\PTB@textvsep){\backgroundContent}}%

}



\PTB@AddToShipoutPictureFG{% relativ zur linken unteren Ecke des Textbereichs

  \PTB@AtTextLowerLeft{%

    \put(-\PTB@texthsep,-\PTB@textvsep){%

      \PTB@tempdimb=0.000420521447484\PTB@scale@base

      \linethickness{\PTB@tempdimb}\normalcolor

      \PTB@tempdima=-0.0420521447484\PTB@scale@base

      \put(-.5\@wholewidth,\PTB@tempdima){%

        \PTB@tempdima=0.0386879731686\PTB@scale@base

        \PTB@tempdimb=0.00168208578994\PTB@scale@base

        \ifx\PTB@qrcode\@empty

          \color{PTBcolor}\framebox(\PTB@tempdima,\PTB@tempdima){}%

        \else

          \sbox\@tempboxa{\qrcode[height=\PTB@tempdima,tight]{\PTB@qrcode}}%

          \raisebox{\dp\@tempboxa}{\usebox\@tempboxa}%

        \fi

        \color{PTBcolor}

        \hspace{\PTB@tempdimb}\raisebox{-\@wholewidth}{%

          \rule{\dimexpr\PTB@tempdima+2\@wholewidth}%

            {\dimexpr\PTB@tempdima+2\@wholewidth}}%

        \hspace{\PTB@tempdimb}\framebox(\PTB@tempdima,\PTB@tempdima){}%

      }

      \PTB@tempdimb=-0.00841042894969\PTB@scale@base

      \footFontSize\sffamily\normalcolor

      \PTB@tempdima=0.122792262665\PTB@scale@base

      \put(\PTB@tempdima,\PTB@tempdimb){%

        \begin{tabular}[t]{@{}l@{}}

          Physikalisch-Technische Bundesanstalt \\

          Braunschweig und Berlin \\[\f@baselineskip]

          \ifx\first@author\@empty\else \textbf{\first@author}\\\fi

          \ifx\PTB@department\@empty\else \PTB@department\\\fi

          \ifx\PTB@workingGroup\@empty\else \PTB@workingGroup\\\fi

        \end{tabular}%

      }

      \PTB@tempdima=0.263246426125\PTB@scale@base

      \put(\PTB@tempdima,\PTB@tempdimb){%

        \begin{tabular}[t]{@{}ll@{}}

          \ifx\PTB@street\@empty\else\multicolumn{2}{@{}l@{}}{\PTB@street}\\\fi

          \ifx\PTB@location\@empty\else\multicolumn{2}{@{}l@{}}{\PTB@location}\\\fi

          \ifx\PTB@phone\@empty\else\ifPTB@german@ Telefon\else Phone\fi:

            &\PTB@phone\\\fi

          \ifx\PTB@fax\@empty\else Fax:&\PTB@fax\\\fi

          \ifx\PTB@email\@empty\else\ifPTB@german@ E-Mail\else E-mail\fi:

            &\href{mailto:\PTB@email}{\PTB@email}\\\fi

          \multicolumn{2}{@{}l@{}}{\href{http://www.ptb.de/}{www.ptb.de}}

        \end{tabular}%

      }

      \PTB@tempdima=0.378469302736\PTB@scale@base

      \put(\PTB@tempdima,\PTB@tempdimb){%

        \begin{tabular}[t]{@{}l@{}}

          \@thanks % wurde bei der Ausführung von \@author gefüllt.

        \end{tabular}%

      }

    }

  }

}



\endinput

ptbposter/ptbposter-2020.clo

0 → 100644
+154 −0
Original line number Diff line number Diff line 
% Rolf Niepraschk, Rolf.Niepraschk@ptb.de



\ProvidesFile{ptbposter-2020.clo}%

  [2022/09/20 1.0.1 PTB-Poster layout 2020 (RN)]



\typeout{*** LAYOUT 2020 ***}



\setlength\PTB@default@fontsize@base{0.0118336635635\PTB@scale@base}% 10pt (A4), 40pt (A0)

\setlength\PTB@default@author@fontsize{0.0157550946737\PTB@scale@base}%   53.3pt (A0)

\setlength\PTB@default@title@fontsize@base{.0282849711986\PTB@scale@base}% 95.7pt (A0)

\setlength\PTB@default@foot@fontsize{0.00567538119577\PTB@scale@base}%  19.2pt (A0)   



\iftutex% LuaTeX oder XeTeX

  \setfontfamily\PTBdesignFont{UniversNextPro-Light}[%

    Ligatures=TeX,

    BoldFont=*,

    ItalicFont=*Italic,

    Scale=1.01,

    Extension=.ttf]

  \setsansfont{texgyreheros}[

    Ligatures=TeX,

    Extension=.otf,

    UprightFont=*-regular,

    BoldFont=*-bold,

    ItalicFont=*-italic,

    BoldItalicFont=*-bolditalic]

\else

  \let\PTBdesignFont=\sffamily% ???

\fi



\AtEndPreamble{%

  \setlength\PTB@topmargin{0.193953\PTB@scale@base}%

  \ifPTBlandscape

    \setlength\PTB@framewidth{0.950378471315\PTB@scale@base}%  3215pt (1130mm) (A0) 

    \setlength\PTB@frameheight{0.447\PTB@scale@base}% 1563pt  (549mm) (A0) 

  \else

    \setlength\PTB@framewidth{0.656013458076\PTB@scale@base}%  2219pt  (780mm) (A0)

    \setlength\PTB@frameheight{0.740117747573\PTB@scale@base}% 2504pt  (880mm) (A0)

  \fi

}



\PTB@AddToShipoutPictureBG{% relativ zur oberen linken Ecke des Blattes

  \PTB@tempdima=-0.07\PTB@scale@base

  \put(\PTB@leftmargin,-0.07\PTB@scale@base){%

    \textcolor{PTBcolor}{\includegraphics[height=.04545\PTB@scale@base]%

          {PTB-logo-A.mps}}

  }

  \put(\PTB@leftmargin,-0.085\PTB@scale@base){%

    \parbox[t]{\PTB@framewidth}{%

      \PTBdesignFont\normalsize

      \begin{varwidth}[t]{.32\linewidth}

        Physikalisch-Technische Bundesanstalt\\

        Nationales Metrologieinstitut

      \end{varwidth}

      \hfill

      \begin{varwidth}[t]{.6\linewidth}

        \begin{hyphenrules}{nohyphenation}

          \def\and{, }\@author % hier wird \@thanks gefüllt

        \end{hyphenrules}

      \end{varwidth}  

    }

  }%

  \def\PTB@tempa{\parbox[c]{\PTB@framewidth}{% Komplette Titeldefinition

    \PTB@title@justification\PTB@title@series\PTBdesignFont\titleFontSize

    \microtypesetup{protrusion=false}\@title}}%

  \begingroup

  \@tempcnta=\@ne \@tempcntb=10499 %

  \loop\ifnum\@tempcnta<25 % Finden der ersten passenden titleFontSize

    \multiply\@tempcntb 10000 \divide\@tempcntb by 10500 % jeweils um 5% kleiner

    \PTB@scaleTitleFontSize{0.\the\@tempcntb}% 1:0.9999, 2:0.9522, 3:0.9068, ...

    %\typeout{\the\@tempcnta\space XXX: \titleFontSize, 0.\the\@tempcntb}%

    \setbox\z@ \hbox{\PTB@tempa}%

    \ifdim\dimexpr\ht\z@+\dp\z@>\PTB@maxtitleheight

      \advance\@tempcnta\@ne % weiter, wenn zu gross

    \else

      \@tempcnta=999 % Abbruch

    \fi

  \repeat

  \endgroup

  \put(\PTB@leftmargin,-0.158\PTB@scale@base){%

    \begin{hyphenrules}{nohyphenation}%

      \PTB@tempa% Title

    \end{hyphenrules}

  }%

  % blauer Rahmen

  \put(\PTB@leftmargin,\dimexpr-\textheight-2\PTB@textvsep-\PTB@topmargin){%

    \linethickness{\PTB@framethickness}\color{PTBcolor}%

    \framebox(\dimexpr\textwidth+2\PTB@texthsep,%

      \dimexpr\textheight+2\PTB@textvsep){\backgroundContent}}%

}



\PTB@AddToShipoutPictureFG{% relativ zur linken unteren Ecke des Textbereichs

  \PTB@AtTextLowerLeft{%

    \PTBdesignFont\footFontSize\normalcolor

    \PTB@tempdima=-\PTB@framethickness 

    \PTB@tempdimb=-0.0125\PTB@scale@base

    \put(-\PTB@texthsep,-\PTB@textvsep){

      \put(\PTB@tempdima,\PTB@tempdimb){%

        \begin{tabular}[t]{@{}l@{}}

          Physikalisch-Technische Bundesanstalt \\

          Nationales Metrologieinstitut \\[\f@baselineskip]

          \ifx\PTB@street\@empty\else\PTB@street\\\fi

          \ifx\PTB@location\@empty\else\PTB@location\\\fi

          \href{https://www.ptb.de/}{www.ptb.de}

        \end{tabular}%

      }

      \PTB@tempdima=0.115\PTB@scale@base

      \put(\PTB@tempdima,\PTB@tempdimb){%

        \begin{tabular}[t]{@{}ll@{}}

          \ifx\first@author\@empty\else \multicolumn{2}{@{}l@{}}{\first@author}\\\fi 

          \ifx\PTB@workingGroup\@empty\else \multicolumn{2}{@{}l@{}}{\PTB@workingGroup}\\\fi

          \\

          \ifx\PTB@phone\@empty\else\ifPTB@german@ Telefon\else Phone\fi:

            &\PTB@phone\\\fi

          \ifx\PTB@fax\@empty\else Fax:&\PTB@fax\\\fi

          \ifx\PTB@email\@empty\else\ifPTB@german@ E-Mail\else E-mail\fi:

            &\href{mailto:\PTB@email}{\PTB@email}\\\fi

        \end{tabular}%

      }

      \PTB@tempdima=0.219\PTB@scale@base

      \put(\PTB@tempdima,\PTB@tempdimb){%

        \begin{tabular}[t]{@{}l@{}}

          \@thanks % wurde bei der Ausführung von \@author gefüllt.

        \end{tabular}%

      }  

      \PTB@tempdima=\dimexpr\PTB@framewidth+\PTB@framethickness %

      \PTB@tempdimc=0.038875630234\PTB@scale@base % 131bp (A0)

      \put(\PTB@tempdima,\PTB@tempdimb+\ht\strutbox){%

        \makebox(0,0)[rt]{%

          \begin{minipage}[t]{.5\textwidth}%

            \mbox{}

            \hfill  

            \ifx\PTB@qrcode\@empty\else

              \begin{minipage}[b]{\PTB@tempdimc}%

                \sbox\@tempboxa{\qrcode[height=\PTB@tempdimc,tight]%

                  {\PTB@qrcode}}%

                \raisebox{\dimexpr\dp\@tempboxa}{\usebox\@tempboxa}%

              \end{minipage}%

            \fi

            \hspace{.5\columnsep}%

            \ifx\PTB@logo\@empty\else

              \begin{minipage}[b]{\PTB@tempdimc}%

                \centering

                \includegraphics[height=\PTB@tempdimc]{\PTB@logo}%

              \end{minipage}%

            \fi 

          \end{minipage}% 

        }%

      }

    }

  }

}



\endinput

ptbposter/ptbposter-new-engines.clo

0 → 100644
+80 −0
Original line number Diff line number Diff line 
% Rolf Niepraschk, Rolf.Niepraschk@ptb.de



\ProvidesFile{ptbposter-new-engines.clo}%

  [2022/09/08 v0.1g `PTB-Poster' new engines (RN/PTB)]



\makeatletter % wegen Laden aus normalem LaTeX-Dokument

\@ifundefined{ifSERIF}{%

   \newif\ifSERIF \SERIFfalse

}{}

\@ifundefined{ifMATHSERIF}{%

   \newif\ifMATHSERIF \MATHSERIFfalse

}{}



\RequirePackage[no-math]{fontspec}

\RequirePackage[mathit=sym]{unicode-math} 



\ifSERIF

  \setmainfont{texgyrepagella}[

    Ligatures=TeX,

    Extension=.otf,

    UprightFont=*-regular,

    BoldFont=*-bold,

    ItalicFont=*-italic,

    BoldItalicFont=*-bolditalic]

\else

  \setsansfont{texgyreheros}[

    Ligatures=TeX,

    Extension=.otf,

    UprightFont=*-regular,

    BoldFont=*-bold,

    ItalicFont=*-italic,

    BoldItalicFont=*-bolditalic]

  \setromanfont{texgyreheros}[

    Ligatures=TeX,

    Extension=.otf,

    UprightFont=*-regular,

    BoldFont=*-bold,

    ItalicFont=*-italic,

    BoldItalicFont=*-bolditalic]

  \renewcommand*\familydefault{\sfdefault}%

\fi  



\ifMATHSERIF 

  \setmathfont{texgyrepagella-math.otf}[

    math-style=TeX,

    bold-style=TeX,

  ]

\else

  \setmathfont{FiraMath-Regular.otf}[

    Scale=1,

    math-style=TeX,

    bold-style=TeX,

    Numbers={Lining,Proportional},

  ]

  %\RequirePackage[usefilenames,weight=Regular]{firamath-otf}

  \setoperatorfont\mathsf 

  \unimathsetup{partial=upright}% 

  %\RequirePackage{mathastext}% nicht so gut

  \setmathfont{texgyreheros-regular.otf}[range=up/{Latin,Greek,num}]

  \setmathfont{texgyreheros-italic.otf}[range=it/{latin,greek}]

  \setmathfont{texgyreheros-bolditalic.otf}[range=bfit/{latin,greek}]

  \setmathfont{texgyreheros-bold.otf}[range=bfup/{latin,greek}] 

\fi



\setmonofont{AnonymousPro-Regular}[%

  Extension = .ttf,

  BoldFont = AnonymousPro-Bold,

  ItalicFont = AnonymousPro-Italic,

  BoldItalicFont = AnonymousPro-BoldItalic,

  Scale     = 1.05, 

  RawFeature={embolden=.5}    

]



\RequirePackage{newunicodechar}

\newunicodechar{^^^^202f}{\,}% 'NARROW NO-BREAK SPACE' (\u202F, 8239)

\newunicodechar{^^^^2009}{\,\hspace{0pt}}% 'THIN SPACE'

\newunicodechar{^^^^00ad}{\-}% 'SOFT HYPHEN'    

  

\endinput