diff --git a/Gehauese.scad b/Gehauese.scad
index 891447e73ef8b210bb1efa2b071e5d11b9cccdfc..52b8ed51441836cfc031c8c0bd491ddd18bc44ae 100644
--- a/Gehauese.scad
+++ b/Gehauese.scad
@@ -8,51 +8,69 @@ module raspberryPi(off_x, off_y, off_z) {
difference(){
union(){
// PCB
- translate([off_x+0, off_y+0, off_z+0]) color([0, 1, 0], 1.0) cube([85, 56, 1.5]);
+ translate([off_x+0, off_y+0, off_z+0]) color([0, 1, 0], 1.0) cube([85, 56, 1.5]);
// USB1
- translate([off_x+70.5, off_y+1.5, off_z+1.5]) color([0.8, 0.8, 0.8], 1.0) cube([ 17.5, 15 , 16]);
+ translate([off_x+70.5, off_y+1.5, off_z+1.5]) color([0.8, 0.8, 0.8], 1.0) cube([ 17.5, 15 , 16]);
// USB2
- translate([off_x+70.5, off_y+19.5, off_z+1.5]) color([0.8, 0.8, 0.8], 1.0) cube ([17.5, 15, 16]);
+ translate([off_x+70.5, off_y+19.5, off_z+1.5]) color([0.8 , 0.8, 0.8], 1.0) cube ([17.5, 15, 16]);
// ETH1
- translate([off_x+66, off_y+38, off_z+1.5]) color([0.8, 0.8, 0.8], 1.0) cube([22, 16, 13.5]);
+ translate([off_x+66, off_y+38, off_z+1.5]) color([0.8, 0.8, 0.8], 1.0) cube([22, 16, 13.5]);
// USB-C
- translate([off_x+6.2, off_y+-1.3, off_z+1.5]) color([0.8, 0.8, 0.8], 1.0) cube([ 10, 8, 3]);
+ translate([off_x+6.2, off_y+-1.3, off_z+1.5]) color([0.8, 0.8, 0.8], 1.0) cube([ 10, 8, 3]);
// HDMI-mini1
- translate([off_x+21.95, off_y+-1.3, off_z+1.5]) color([0.8, 0.8, 0.8], 1.0) cube ([8, 8, 3]);
+ translate([off_x+21.95, off_y+-1.3, off_z+1.5]) color([ 0.8, 0.8, 0.8], 1.0) cube ([8, 8, 3]);
// HDMI-mini2
- translate([off_x+35.5, off_y+-1.3, off_z+1.5]) color([0.8, 0.8, 0.8], 1.0) cube ([8, 8, 3]);
+ translate([off_x+35.5, off_y+-1.3, off_z+1.5]) color([0.8 , 0.8, 0.8], 1.0) cube ([8, 8, 3]);
// AUX-out
- translate([off_x+54, off_y+5, off_z+5]) rotate([0, 90, 90]) color([0.0, 0.0, 0.0 ], 1.0) cylinder(15, 3.5, 3.5,$fn=50, true);
+ translate([off_x+54, off_y+5, off_z+5]) rotate([0, 90, 90 ]) color([0.4, 0.35, 0.35], 1.0) cylinder(15, 3.5, 3.5,$fn=50, true);
// mSD-Card
- translate([off_x+-2.2, off_y+22.5, off_z+-1.5]) color([0.0, 0.0, 0.0], 1.0) cube ([10, 11, 1.5]);
+ translate([off_x+-2.2, off_y+22.5, off_z+-1.5]) color([ 0.0, 0.0, 0.0], 1.0) cube ([10, 11, 1.5]);
//Pin-Header
- translate([off_x+7.5, off_y+49.5, off_z+1.5]) color([0.0, 0.0, 0.0], 1.0) cube([50 , 6, 8.5]);
+ translate([off_x+7.5, off_y+49.5, off_z+1.5]) color([0.0, 0.0, 0.0], 1.0) cube([50 , 6, 8.5]);
//Mount hole1 - Copper
- translate([off_x+3.5, off_y+3.5, off_z+0.75]) color([0.83137, 0.68627, 0.2157], 1.0) cylinder(1.6, 3, 3, true);
+ translate([off_x+3.5, off_y+3.5, off_z+0.75]) color([ 0.83137, 0.68627, 0.2157], 1.0) cylinder(1.6, 3, 3 , $fn=50, true);
//Mount hole2 - Copper
- translate([off_x+61.5, off_y+3.5, off_z+0.75]) color([0.83137, 0.68627, 0.2157], 1.0) cylinder(1.6, 3, 3, true);
+ translate([off_x+61.5, off_y+3.5, off_z+0.75]) color([ 0.83137, 0.68627, 0.2157], 1.0) cylinder(1.6, 3, 3, $fn=50, true);
// Mount hole3 - Copper
- translate([off_x+61.5, off_y+52.5, off_z+0.75]) color([0.83137, 0.68627, 0.2157], 1.0) cylinder(1.6, 3, 3, true);
+ translate([off_x+61.5, off_y+52.5, off_z+0.75]) color([ 0.83137, 0.68627, 0.2157], 1.0) cylinder(1.6, 3, 3, $fn= 50, true);
// Mount hole4 - Copper
- translate([off_x+3.5, off_y+52.5, off_z+0.75]) color([0.83137, 0.68627, 0.2157], 1.0) cylinder(1.6, 3, 3, true);
+ translate([off_x+3.5, off_y+52.5, off_z+0.75]) color([ 0.83137, 0.68627, 0.2157], 1.0) cylinder(1.6, 3, 3, $fn=50, true);
}
// Mount hole1 - Drilling
- translate([off_x+3.5, off_y+3.5, off_z+0.8]) cylinder(2, 1.35, 1.35, true);
+ translate([off_x+3.5, off_y+3.5, off_z+0.8]) cylinder(2, 1.35 , 1.35, $fn=50, true);
// Mount hole2 - Drilling
- translate([off_x+61.5, off_y+3.5, off_z+0.8]) cylinder(2, 1.35, 1.35, true);
+ translate([off_x+61.5, off_y+3.5, off_z+0.8]) cylinder(2, 1.35, 1.35, $fn=50, true);
// Mount hole3 - Drilling
- translate([off_x+61.5, off_y+52.5, off_z+0.8]) cylinder(2, 1.35, 1.35, true);
+ translate([off_x+61.5, off_y+52.5, off_z+0.8]) cylinder(2, 1.35, 1.35, $fn=50, true);
// Mount hole4 - Drilling
- translate([off_x+3.5, off_y+52.5, off_z+0.8]) cylinder(2, 1.35, 1.35, true);
+ translate([off_x+3.5, off_y+52.5, off_z+0.8]) cylinder(2, 1.35, 1.35, $fn=50, true);
+ // USB-Insides
+ translate([off_x+75, off_y+3, off_z+11]) cube([15, 12, 5]);
+ translate([off_x+75, off_y+3, off_z+4]) cube([15, 12, 5]);
+ translate([off_x+75, off_y+21, off_z+11]) cube([15, 12, 5]);
+ translate([off_x+75, off_y+21, off_z+4]) cube([15, 12, 5]);
+
+ // ETH-Insides
+ translate([off_x+75, off_y+40, off_z+4]) cube([15, 12, 9]);
+
+ // HDMI-Insides
+ translate([off_x+36, off_y+-1.5, off_z+2]) cube([7, 5, 2]);
+ translate([off_x+22.5, off_y+-1.5, off_z+2]) cube([7, 5, 2]);
+
+ // USB-C-Insides
+ translate([off_x+7, off_y+-1.5, off_z+2]) cube([8.5, 5, 2]);
+
+ // AUX-Insides
+ translate([off_x+54, off_y+4, off_z+5]) rotate([0, 90, 90 ]) cylinder(15, 2.2, 2.2,$fn=50, true);
}
}
@@ -61,15 +79,26 @@ module case(visibility){
difference() {
union(){
// Groundplate
- translate([0, 0, 0]) color([0.4, 0.4, 0.4], visibility) cube([100, 65, 2]);
+ translate([0, 0, 0]) color([0.4, 0.4, 0.4], visibility) cube([95, 62, 2]);
+ // Screwcylinders
+ translate([10.5, 6, 3]) color([0.4, 0.4, 0.4], visibility) rotate([0, 0, 0]) cylinder(5, 3, 3, $fn =50, true);
+ translate([68.5, 6, 3]) color([0.4, 0.4, 0.4], visibility) rotate([0, 0, 0]) cylinder(5, 3, 3, $fn =50, true);
+ translate([68.5, 55, 3]) color([0.4, 0.4, 0.4], visibility) rotate([0, 0, 0]) cylinder(5, 3, 3, $fn =50, true);
+ translate([10.5, 55, 3]) color([0.4, 0.4, 0.4], visibility) rotate([0, 0, 0]) cylinder(5, 3, 3, $fn =50, true);
+
// Side front
- translate([0, 0, 0]) color([0.4, 0.4, 0.4], visibility) cube([100, 2, 50]);
+ translate([0, 0, 2]) color([0.4, 0.4, 0.4], visibility) cube([95, 2, 40]);
+ // Side back
+ translate([0, 60, 2]) color([0.4, 0.4, 0.4], visibility) cube([95, 2, 40]);
// Side left
- translate([0, 0, 0]) color([0.4, 0.4, 0.4], visibility) cube([2, 65, 50]);
+ translate([0, 0, 2]) color([0.4, 0.4, 0.4], visibility) cube([2, 62, 40]);
+ // Side right
+ translate([93, 0, 2]) color([0.4, 0.4, 0.4], visibility) cube([2, 62, 40]);
+
}
// Aux-hole
- translate([61, -0.2, 10]) rotate([0, 90, 90]) cylinder(5, 3.5, 3.5,$fn=50, true);
+ translate([61, -0.2, 10]) rotate([0, 90, 90]) cylinder(5, 3.5 , 3.5,$fn=50, true);
// HDMI-hole1
translate([28.7, -0.2, 6.3]) cube([8.5, 4, 3.5]);
// HDMI-hole2
@@ -78,11 +107,17 @@ module case(visibility){
translate([13, -0.2, 6.3]) cube([10.5, 4, 3.5]);
// CAM-line-hole
translate([4, 4, -0.1]) cube([2, 20, 2.2]);
+ // USB-hole1
+ translate([92.5, 3.6, 6.4]) cube([3, 15.75, 16.5]);
+ // USB-hole2
+ translate([92.5, 21.5, 6.4]) cube([3, 15.75, 16.5]);
+ // ETH-hole
+ translate([92.5, 40, 6.4]) cube([3, 17, 14]);
}
}
raspberryPi(7, 2.5, 5);
-case(0.7);
+case(0.9);
//translate([20, 0, 10]) rotate([0, 90, 90]) cylinder([20, 3.6, 3.6], $fn=50, true);